Jump to content

9v system

Eurobricks Counts
 View Profile  See their activity

  • Posts

    1,132

  • Joined

  • Last visited

 Content Type 

Everything posted by 9v system

  1. 9v system
    congratulations on getting it finished, im going to be building it as well, do you have a list of the parts required to build it?
  2. 9v system
    i think someone did and it works the same as the riging on that is only there because there was no other 28t gear at the time
  3. 9v system
    you could replace that whole assembly with the 28 tooth gear
  4. 9v system
    @Berthil said he had issues with the spiral lift jamming so had to take it out of the layout
  5. 9v system
    i would love to see some internal photos of these new motors, it looks like the XL has the same cheap internal motor with the extremely thin brushes which causes them to break easily
  6. 9v system
    i tried doing that but i have to lower the spiral lift so large hopper part can be added
  7. 9v system
    @Innocity i have also been doing some changes to my ball factory. i have been trying to change the spiral lift part do how akiyuki has it in his version as it can take a lot more balls with the large input.
  8. 9v system
    just found this video of the servo and it has a weird problem. has anyone had this issue before. BTW i dont buy knock off stuff but this interest me
  9. 9v system
    have you tried running it slower? my works better when run slower as i dont follow the standard anyway
  10. 9v system
    @Ankoku my stuck ball runs nicely in this video
  11. 9v system
    my thoughts on the new frozen 2 sets: i think they look pretty good, the builds look good and have some interesting pieces that im sure could be of use the only thing that is really annoying me being someone who collects and builds these sets is the faces on the minidolls, they look really weird compared to what they used to look like. i prefer the older look, like the old aurora to the new one
  12. 9v system
    i havent really had this issue with mine since i rebuilt with brand new parts, but i see what you mean, how did you go with fork to fork?
  13. 9v system
    this video has one that has about 100 balls under it
  14. 9v system
    @Ankoku have you thought of changing the input part of the stuck ball module to this input with the two agitators? also @Courbet the screw type 1 works with the panels with side supports, i tested it on my old build before ordering all new parts for the rebuild
  15. 9v system
    akiyukis ball factory is a good one for automation as it does lots of things of the one motor
  16. 9v system
    im sorry but this isnt my build as i havent built it at all, i just found it and thought i would share it here, can you show me what part the gears catch on please?
  17. 9v system
  18. 9v system
    @Berthil i have finished your version of the ball factory but im having trouble with the bucket dumper, at certain speeds the dumper doesn't grab the buckets properly, i have not had this issue before so im curious as to weather you had this issue
  19. 9v system
    yes i saw this too and i just had to share it to my Fb group, i can recognize parts from different akiyuki modules
  20. 9v system
    thanks
  21. 9v system
    @Courbet do you have a bsx file for the steering cup module? i noticed the part list is at the end but i cant find the brick stock file.
  22. 9v system
    im also wondering what the purpose of these are, i tried adjusting them a bit to see if i can get it to grab a bit better, if they are bent to far the clamps struggle to close also the instructions are fine but i think the small linear is meant to go into the hole next to it on the right , then it is able to hold a lot of balls as i dont run at full speed or follow the standard
  23. 9v system
    @Courbet i have finished my build of the CT however i have an issue: the clamps dont grab the containers sometimes in the slots and the container falls out can you tell me what you did to make the clamp grab the container properly? thanks
  24. 9v system
    not sure if anyone has seen this but i found this extended version of the ball factory a while ago and i think its worth sharing https://www.youtube.com/watch?v=RBAAEnizWl4&fbclid=IwAR2gx0wWRj-9Ylrrk_tBSWQRWLKMmnBCNBECsJEl8n9xje8tIcP6TZtL3qk
  25. 9v system
    nice work @Ankoku do you mind if i share these instructions to my facebook group?
×
×
  • Create New...