Jump to content

madsen1997

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    66

  • Joined

  • Last visited

 Content Type 

Everything posted by madsen1997

  1. madsen1997
    Thnx, I will take a look at it... I'll post it at the other forum too, thnx
  2. madsen1997
    Hi! I'm working on my instructions for my 42043-C model. but i have some problems with lpub. been making the 3D file in both MLcad and LDcad and it worked fine until I added some pneumatic hoses in LDcad. After adding the pneumatic hoses Lpub is not loading any of my submodels, but only the main file. main file is a [MPD] file, and all the submodels incl the pneumatics are [LDR]files. this is how it looks when opening the complete file in LDcad: Skærmbillede 2016-05-06 21.29.12 by Madsen's Technic Workshop, on Flickr but here's what it looks like when opening the file in Lpub: Skærmbillede 2016-05-04 20.13.45 by Madsen's Technic Workshop, on Flickr only LDcad and LDview is loading the complete file with no errors, MLcad is crashing and Lpub is only loading the half. I simply have no clue why it is doing this, so I asking you guys, anyone knows what I'm doing wrong all files I been using for my build is at this link
  3. madsen1997
    I fully agree with you .... and I may change them soon, just have to order some tres that will fit ;)
  4. madsen1997
    Thnx :) .... I can see the point with the front axle and wheels ;) .. Maybe I can take a look at the axle, but tres can't be changed yet ;)
  5. madsen1997
    A little update today...... the model itself is now completed.... and here is some final photos. Doors and Hood is openable, and then you can se the 6L Engine. Rear end of the truck. 3 valve showed at the back of the crane for the 3 cylinders powering the cranearms, it gives some more control i think https://www.facebook.com/MadsensTechnicWorkshop
  6. madsen1997
    5:10 16:6 11:4 3:3 2:2 13:1
  7. madsen1997
    The only C-model for 42043 is the one I'm working on here....... as I can find ;)
  8. madsen1997
    Had some problems with the Gearbox..... so I took most of the midlepart apart, and started to rebuild it........ I also started making an building instruction for it, which I will upload at my website when it's done...... My current building progress will be updated at my FB page I'm using Mlcad and Lpub for the instructions.
  9. madsen1997
    Just updated the post.... more will come And Thnx!
  10. madsen1997
    Hi! Today I finished the 3d model of 42043-C Zetros, so the complete instruction files is on the way! ..... This is my very first Moc that I have published, but the project isn't 100% finished yet. Got the 42043 Set last year, and then decided to rebuild it into an alternative build [C-Model] This is how the model looks like now, it needs a touch before it's done. The model is based on the real life Mercedes Benz Zetros. Technical detail will come as soon as possible, but here is some picture of it. Like the 42043-A this model has a pneumatic crane without the buckets. the crane is build with one pneumatic hose going through the turnable, It allows the crane for turning 4x360 degrees without damaging the hose. 4 valves is mounted at the back of superstructure for controlling the 3 pneumatic cylinders. Crane lifting capacitet: 200 grams of lego[full exspanded] Outriggers been rebuild too, because those on 42043-A had some issue under load. these ones are build like those on 8110, But also allows to fold the outrigger-leg upsite for better clearence. Outriggers arms is controlled independ [2 functions]because of the missing feature with tilting the Flatbed. Battery Box mounted at the back of the cab. with a openable cover. Steering is build like on 42043, and controlled by the 2 beacons. the cabin was hard to build with the few white parts in the 42043 set, but I think i maded i pretty good. UPDATE will come soon! Some facts Lenght: 64 studs ( 52 cm) Wide: 19 studs ( 15 cm) Hight: 26 studs ( 20 cm) [folded crane] Ground Clearence: 3 studs ( 2.4 cm) Weight: will come today Pieces in use: 2399 6x4 Full suspension on all axles Parts: 2300~2500 Openable doors and hood Foldable outriggers Single pneumatic hoses connection ( making the crane rotate 1020 degrees) 3 valve 1 input valve Crane lifting capacitet: 100~200 grams of lego Steering from the ledt beacon on the Roof Model is RC ready
  11. madsen1997
    28:10 37:6 16:4 27:3 41:2 22:1
  12. madsen1997
    yep... you right about the adresses... :) just a little idea i got... I know about the other topic.... here's the editable version : http://bit.ly/1KPmU3C
  13. madsen1997
    Hey everyone.... i was thinking about creating a list or map of all the 41999 set around the world.... so then i greated this map: http://www.zeemaps.c...p?group=1318125 ... a freind and I has already added our model, and I think it would be cool to se how many 41999 we can list... also because it is a limited model.... :-) feel free to join if you like :-)
  14. madsen1997
    Hi... cool contest... but I don't really understand this,,, may we only use 4 motors, and 1 SBrick, or may we use for example, 2 SBricks, for 8 motors? ... I'm understand this like we may only use 4 motors.... And is it only moc which may allowed in this contest? :D ...
  15. madsen1997
    Yep i know.. but i could be quite awsome :-)
  16. madsen1997
    I'm from denmark and got plate number 17179. I've been making a lego 41999 group on facebook.. i think that we should make some kind of a page with a 41999 register... number. Country. Which one who was top 100.... and so
×
×
  • Create New...