efferman

i think its finished 100_0861 von efferman auf Flickr 100_0862 von efferman auf Flickr 100_0865 von efferman auf Flickr 100_0866 von efferman auf Flickr 100_0867 von efferman auf Flickr 100_0868 von efferman auf Flickr 100_0869 von efferman auf Flickr

a small progress, only small details are missing 100_0860 von efferman auf Flickr

it dont will be a scale model of the liebherr L574! i have used the model only for the bucket and its overall proportions. Beside of this i dont like white driver Cabs. btw operators cab, what do you think about this? 100_0857 von efferman auf Flickr

both

the battery box is actual not on board. i think it will be placed at the backside of the cab.

the plan was a liebherr L574 which has a white cab, but this looks a bit strange, so i will do something different. actual standing 100_0856 von efferman auf Flickr

The real advantage is better connectivity. On my big G it was a problem when one receiver had contact, and the other one not. Then i had an not wanted skid steer and the half power.o

zblj, why do not use a servo and electrical switches to power the motors of this beast? you would not need so much receivers.

indeed, the Ms on the 8043 are the reason for the bad digging performance. with Ls it work much better btt: the chassis has get its final chassis revision, so i can go to the optical things. 100_0855 von efferman auf Flickr

you are right with the width of wheeled loaders, but i have a solid model of a liebherr L574 in the same scale which iam build I have the bucket of this model on my loader and my loader has the same width of the bucket. so i think my loader is in scale. maybe it looks so wide, because there is actually no cab and engine bonnet on it. @ unimog123 i can use both buckets, this one for digging, the other with liftarms for display. the liftarm bucket has not really good capabilitys in picking up parts from the floor. And an RC loader which can not good digg is not funny to play.

sorry for doublepost, but i have driven a round hmmm, i think the steering could be a little bit faster

thank you very much some progress edit² and a third party bucket for better digging. please note that no lego part was damaged or modified. 100_0853 von efferman auf Flickr

i dont think we will see new universal joints, because there is the possibility of gear reduction behind the universal joint

iam curios which steering system lego will use at the 42030 and where they will place the motors. I place the motors in the back and use linear actuators for steering. In combination witha pendular rear axle the gearbox in the articulation area is pretty complex. 100_0845 von efferman auf Flickr

GMade MT 1901 1,9" 105 mm outer diameter 38mm width 48mm inner diameter, fits in the original gap on the rim 16,90€ in germany, 20 US$ in the united states 100_0839 von efferman auf Flickr fits on my planetary rims too 100_0841 von efferman auf Flickr and to a Liebherr 574 in bruder profi scale 100_0843 von efferman auf Flickr

there is indeed a major problem: to much ideas at the same time actually the 2014 flagship 42030 is buzzing in my head. so i have no chance to get out hopefully the big thing is getting out of my head soon to finish the K100 but in meanwhile, the rear axle (lxf file) for a big wheeled loader 100_0837 von efferman auf Flickr 100_0836 von efferman auf Flickr the tires will be Gmade MT 1901. i think they will lokk fine on a wheeled loader

you should look after the 42024, his tires are 49,5x20

i have changed the mounting positions and made a short vid

My 8265 rc can lift it without a problem, only the mounting points are different at this time, so it cant replace the original bucket without modifications.

hmmm, i dont think so

a four in one bucket?

what do you think about these bucket?

there is a yellow knob wheel visible on the picture

The length overall is the same, but the wheelbase is two studs longer to get the two PF-L in the front. The other L motor sits above the fake engine and powers the wheel. A M motor is placed under the drivers seat and is used for steering.

why not? the 8265 is smaller and fully rc with fake engine is not a problem in this size 100_0827 von efferman auf Flickr