nanoreber

Now (with december 2022 update) when loading my 2600 set 2 bricks are removed (I think there are no other changes for this set), Both removed bricks are 54200 (black) located on both top corners of front panel. Those are in collision with plate 1x3 Medium stone grey. 50746 (transpared) can be placed there without error (same 85984). It look like there is small collision (on included screen this brick is red), but it look correct as in this set. Updateing that bricks doesn't fix that problem.

I finished building on 18.08.2022, using the current element pack "Development Version 20220716", which is the last one so far. As for the other elements, I would be pleasantly surprised if they were added / fixed without indication :) So it must be in the internal version. Is a newer version available for download somewhere? And also - there is no baseplate with driveway and recess, which is shown here on subpage 4.

Hello, I built a model of ATARI 2600 - set 10306 - https://www.lego.com/en-us/service/buildinginstructions/10306 I have used latest ready to use pack of parts. During building I encountered problems: - the bevels cannot be attached upside down to the small bushings - page 106, step 93 (I solved differently) - the largest bevels should probably be pressed downwards (it is impossible to place them otherwise in the ldd) - page 111, step 101 - the sides of the atari 2600 miniature cannot be moved properly - page 158, step 160 - some other elements do not fit exactly - minimally offsets (typical ldd limitation, no errors) - couldn't find the cat figure - page 160, step 162 (I replaced it with a dog) - minifigure - medium legs - cannot sit on the studs at the back - page 161, step 164 (I replaced the beam with a smooth one) - not put 2 rubber bands under switches, page 214, step 244 (this probably can't be done anyway) - joystick mechanism - rubber parts (if they are the right ones) do not fit on the crossbar - pages 223-224, steps 4-5 (I rebuilt a bit and put 2 rubbers out of 4) - no cable - pages 238-239, steps 33-34 (I replaced with chains) - lack of stickers / prints (where I could I used the available ones) - after transfer to Stud.io there are a lot of errors. Info (non released to ldd issues): - spare elements - I selected based on guesses - colors may be wrong - I selected by eye - similar elements may be chosen incorrectly (I tried to use same type consistently) - the scene - which should be hidden inside - I exposed detached outside BLOCKS FROM OTHER SETS: - window from old space angle can not be changed 2443+2418 - no 4x3x1 bevel with fenders cut out - car hood - set 4466 - lack of old motorcycle (and glass for it) Elements, among others, from set 555 (old basic set - https://www.toysperiod.com/lego-set-reference/universal-building-set/basic-set/lego-555-2-universal-building-set/) - no wheels 2x2x1 - lack of cross-brace for the windmill - lack of vertical 2x3 windmill mount (the other type of mount is present - part 3481) - no small propeller Please take a look at that issues. PS. Sorry, my English is as is, so I used a translator (www.DeepL.com/). Here is the model: https://qtz.cwaboard.co.uk/vid/atari2600.lxf