jabz10 Posted April 17, 2020 (edited) Hi recently I’ve noticed my Emerald Night motor/gear will bind if used in reverse at any moderate speed. I’m sure the wheels are put together correctly ie 3 and 12 o’clock positions, I’ve readjusted a few time’s. The first (bottom) picture shows the wheel placement. The second (top) picture shows how it binds, the wheel piston gets stuck on an angle as shown. Is there any way to fix this? Doesn’t appear to be a problem going forwards. Edited April 17, 2020 by jabz10 Share this post Link to post Share on other sites
JopieK Posted April 17, 2020 Maybe these tips are somewhat useful? Share this post Link to post Share on other sites
jabz10 Posted April 17, 2020 Thanks I'll try that alternative fix out. Share this post Link to post Share on other sites
zephyr1934 Posted April 17, 2020 There is an extensive set of "things to fix" on the EN in one of the old railbricks issues found here: https://brickmodelrailroader.com/index.php/download-railbricks/ (I don't have time right now to find which one but post back if you can't find it) The first thing I would try is temporarily disabling the cylinders by removing that 6 long technic liftarm. The technic axle "piston" might be binding. Share this post Link to post Share on other sites
TJJohn12 Posted April 18, 2020 On 4/17/2020 at 10:26 AM, zephyr1934 said: There is an extensive set of "things to fix" on the EN in one of the old railbricks issues found here: https://brickmodelrailroader.com/index.php/download-railbricks/ (I don't have time right now to find which one but post back if you can't find it) The first thing I would try is temporarily disabling the cylinders by removing that 6 long technic liftarm. The technic axle "piston" might be binding. Found it thru a quick search - Issue 7:https://brickmodelrailroader.com/wp-content/uploads/railbricks/railbricks_7-print.pdf#page=31 Share this post Link to post Share on other sites
