CaptvirgilHilts Posted November 2, 2016 8 minutes ago, MNW said: Can somebody post a link to the new Batman? They already said we can post a link if it has a new figure, as long as we aren't showing a picture of copies of exisiting stuff here. No links yet that picture popped up on Digger's FB page. Share this post Link to post Share on other sites
abby17 Posted November 2, 2016 6 minutes ago, MNW said: Can somebody post a link to the new Batman? They already said we can post a link if it has a new figure, as long as we aren't showing a picture of copies of exisiting stuff here. https://www.facebook.com/digger318/photos/a.684169788282727.1073741925.110400738992971/1329145843785115/?type=3&theater Share this post Link to post Share on other sites
bbquicksilver Posted November 2, 2016 Those arms are pretty boss if the actual figures look like that Share this post Link to post Share on other sites
Robianco Posted November 2, 2016 To be honest... regardless of the quality of the prints on those figures the vambraces are impossible to get hold of so if they're moulded to a decent standard they'd be worth picking up just for those. Share this post Link to post Share on other sites
MNW Posted November 2, 2016 (edited) 2 hours ago, abby17 said: https://www.facebook.com/digger318/photos/a.684169788282727.1073741925.110400738992971/1329145843785115/?type=3&theater Thank you :) and wow those Batman figures are "Bat-Sh*z crazy" xD Like Rob, said it could be worth if it for the Vambraces. I only bought the Assassins creed set for the arm spikes. Edited November 2, 2016 by MNW updated Share this post Link to post Share on other sites
pittpenguin123 Posted November 2, 2016 1 hour ago, Robianco said: To be honest... regardless of the quality of the prints on those figures the vambraces are impossible to get hold of so if they're moulded to a decent standard they'd be worth picking up just for those. Im thinking of picking up these just for those. They look like they would be perfect gold gauntlets fro a Link figure Share this post Link to post Share on other sites
bbquicksilver Posted November 2, 2016 (edited) hey guys, what is pad printing? has anyone bought from popfunkmunkey because they have a good selection/whats your experience with this site? Are there better quality minifigs that aren't from china and aren't an insane price? Edited November 2, 2016 by bbquicksilver adding question Share this post Link to post Share on other sites
wickedlemon Posted November 2, 2016 (edited) 14 minutes ago, bbquicksilver said: hey guys, what is pad printing? has anyone bought from popfunkmunkey because they have a good selection/whats your experience with this site? Are there better quality minifigs that aren't from china and aren't an insane price? I've got one PopPunkMunky figure - original Captain Britain ( https://flic.kr/p/NHJb9e ). No problem with ordering and delivery. Penzora has some good pricing (especially with the weak pound) with free worldwide shipping if you are looking for something a step up from China quality. It depends where you are in the world, as the postage can often double the price if you're in the wrong country. Edited November 2, 2016 by wickedlemon Spelling Share this post Link to post Share on other sites
Collector Posted November 2, 2016 I'm pretty sure this isn't the first time POGO has put out new figs before the official ones were released, maybe they've an inside man working at Lego. Share this post Link to post Share on other sites
bbquicksilver Posted November 3, 2016 4 hours ago, wickedlemon said: I've got one PopPunkMunky figure - original Captain Britain ( https://flic.kr/p/NHJb9e ). No problem with ordering and delivery. Penzora has some good pricing (especially with the weak pound) with free worldwide shipping if you are looking for something a step up from China quality. It depends where you are in the world, as the postage can often double the price if you're in the wrong country. hey man thanks for all the info. i wish there was a plus system here so i could upvote you Share this post Link to post Share on other sites
rmorales629 Posted November 3, 2016 12 hours ago, Mattyj82 said: Could someone post the batman 1s on reddit? Damn why g2 colour scheme?? Looks fantastic. Here's the vid of Devastator in action I shot awhile back. I'm waiting for Superion to be released so I can shoot Bruticus together with it Share this post Link to post Share on other sites
Robianco Posted November 3, 2016 (edited) 12 hours ago, bbquicksilver said: hey guys, what is pad printing? has anyone bought from popfunkmunkey because they have a good selection/whats your experience with this site? Are there better quality minifigs that aren't from china and aren't an insane price? Pad printing is the technique used by Lego to print on their minifigures. Each colour has the ink lifted by a pad which then presses down on the part to print it. It's a relatively expensive process when doing short runs of figures especially when considering that each colour needs to have a plate made for the printing process. That's part of the reason that pad printed figures can be more expensive than digitally printed figures. Customisers such as Christo, Phoenix Customs, Muddy River Minifigs and Paris Custom Bricks pad print their figures. Here's a video from Legoland California printing three colours onto a brick... it's a simple design but the process is the same. Imagine this for a 6 colour minifigure which isn't too hard to image once you consider you need to print white as a base first, then any colour on top including facial marks such as cheekbones as a separate colour. Then you have digitally printed figures which are produced by people such as Onlinesailin and Poppunkmunky. Digital print works in a way that's similar to an inkjet printer you'll have at home but with more opaque inks. This is then sealed as part of the print process... This has the effect of the ink sitting thicker on the plastic in a way that you can feel. A very good digital printer will get a smooth ink coverage but in the same way that an inkjet printer can have banding or lines appear in the ink this can also happen in digital print and you'll actually see the nozzle lines on some digitally printed figures. The next video shows UV digital printing on some legs. When I first got into custom figures I ordered from PPM as well as Onlinesailin. I have to say that Onlinesailin is probably the best digital print on figures out there... along with a newcomer called Leyile Brick who I've heard good things about. Leyile Brick are based in China but print on genuine Lego and I know European and US based resellers stock their stuff but wouldn't touch bootleg items. I own two Leyile Brick pad printed figures and the quality is very good. PPM are fine and may have a better printer than when I bought from them several years go but I'm not a fan of digital print at all. The thickness of the inks can make detail look clumsy especially if it isn't done right whereas the same print done by pad printing would be sharp and clean. The next video is a review of a Green Arrow figure by Bricks and Bits Customs. At 1.41 they hold the figure closer and mention the thickness of the print. If you look closely you can see the lines on the flat paler green area on the torso from the inkjet nozzle: People such as Penzore and SGP based in the UK also print digital figures but I have some issue with the design of their figures. You may be happy with how they look and that's pretty much the main point. If you're happy with how it looks and how it feels then it's good enough. I'm just very picky about design and print quality so some things I won't touch. I'll just add another couple of videos in from minifigures.co.uk where they review what they consider the best figures of 2013 and 2014. In the 2013 video a lot of them are UV printed whereby in the 2014 all but one are pad printed. When you look at figures such as Black Cat in the 2014 video you'll see how the print is perfectly flat and the detail works perfectly. Bear in mind that these digital figures are the best that you could buy at that time and Andrew should know as he stocks a lot of custom figures. Edited November 3, 2016 by Robianco Share this post Link to post Share on other sites
briksen Posted November 3, 2016 hello, i'm looking for a gallery of pictures of bootleg/custom batmans with brands refs. some graphic ideas of a batman hall of armours would be great too. do you have something like that ? Share this post Link to post Share on other sites
wasswass Posted November 3, 2016 (edited) 3 hours ago, Robianco said: Pad printing is the technique used by Lego to print on their [...] Thanks a lot, that was very instructive 1 hour ago, briksen said: hello, i'm looking for a gallery of pictures of bootleg/custom batmans with brands refs. some graphic ideas of a batman hall of armours would be great too. do you have something like that ? Wickedlemon has a great ressource for that: http://www.herobloks.co.uk/ As for the Batman hall of costumes, french MOCer Poyou has included one in his Batcave 2.0 using display cases: https://poyou04.wordpress.com/2016/06/05/the-batcave-2-0-moc/ Firestar Toys has some great display cases but they're pricey imo: https://www.firestartoys.com/Shop/Minifigure-Accessories/Minifigure-Display-Cases-and-Stands/7769-Minifigure-Display-Case-~-Black-Base.html Edited November 3, 2016 by wasswass Share this post Link to post Share on other sites
wickedlemon Posted November 3, 2016 Just now, wasswass said: Firestar Toys has some great display cases but they're pricey imo: https://www.firestartoys.com/Shop/Minifigure-Accessories/Minifigure-Display-Cases-and-Stands/7769-Minifigure-Display-Case-~-Black-Base.html I used to pick up the Character Building figures whenever I saw them cheap for their display boxes. You can still grab a bargain on eBay if you keep your eyes open. They work out cheaper than the Firestar ones. Share this post Link to post Share on other sites
tkkim79 Posted November 3, 2016 anyone know what are those spiderman? Share this post Link to post Share on other sites
adalric Posted November 3, 2016 5 minutes ago, tkkim79 said: anyone know what are those spiderman? DLP9033. Spider-Man India, Cyborg Spider, Spider-Man (Bruce Banner - Earth 70105) The Spider-Man (Aaron Aikman), Spider Armor MK III, Devil-Spider, Scarlet Spider (Joe Wade), Secret War Spider-Man Share this post Link to post Share on other sites
Robianco Posted November 3, 2016 Iffy helmet aside that Chrome Claws actually looks pretty good. Share this post Link to post Share on other sites
tkkim79 Posted November 3, 2016 17 minutes ago, adalric said: DLP9033. Spider-Man India, Cyborg Spider, Spider-Man (Bruce Banner - Earth 70105) The Spider-Man (Aaron Aikman), Spider Armor MK III, Devil-Spider, Scarlet Spider (Joe Wade), Secret War Spider-Man Thank you~ Share this post Link to post Share on other sites
Robianco Posted November 3, 2016 DLP. Bringing obscure Spider variants to the masses since 2016. Share this post Link to post Share on other sites
MNW Posted November 3, 2016 48 minutes ago, Robianco said: DLP. Bringing obscure Spider variants to the masses since 2016. They are awesome for recreating Spiderverse though (which they all featured in, and was an amazing crossover) Share this post Link to post Share on other sites
adalric Posted November 3, 2016 26 minutes ago, MNW said: They are awesome for recreating Spiderverse though (which they all featured in, and was an amazing crossover) While the quality of DLP is usually outstanding, it's LeyileBrick that's creating these customs. DLP is just taking their designs. Share this post Link to post Share on other sites
wickedlemon Posted November 3, 2016 Did anyone pick up the Bohzi Spider-man wave with Lizard and Green Goblin that came out a while back? I'm trying to find some pics of the actual figures to see if they're worth picking up. Share this post Link to post Share on other sites
bbquicksilver Posted November 3, 2016 Hey does anyone know who has a good superior spiderman? link if possible. Share this post Link to post Share on other sites
pittpenguin123 Posted November 3, 2016 As some one who dosnt dive deep into the multiverses, this thread confuses me all the time Share this post Link to post Share on other sites