Zerobricks Posted September 8, 2015 Posted September 8, 2015 (edited) So as soon as I heard about the new contest, I knew I wanted a different crane as the normal mobile ones... A quick google search for off road crane inspired me as soon as I saw this picture: More info here: http://www.ww.mainpu...ifting/6196.htm Yes, its an 8x8 off road crane with massive tyres, suspension and what-not. After fiddling in LDD and real life I came up with front suspension: As you can see, its inspired by 42043's rear axle assemby, but upgraded: - with all wheel drive - portal axles, - improved steering system - longer, harder shock absorbers - can carry A LOT of weight The steering system is my own idea (as far as i know), by using different handle and steering arms length I get different steering angles: Another thing I built are the outriggers. Because this is an off road truck, the outriggers need to be high enough not to bump into terrain, yet they have to lower enough to do their job. This is why they extend at an angle: The outriggers may look rather thin and weak, but the fact is the 13L beam and 13L rack are in a sandwich which cannot be seperated, so they can carry lot of weight, as long as you dont bend them sideways too much. Here is how the front suspension and outriggers look like together: And I already started working on the rear axle... You can see its simpler than front axle, it has more support, and its very solid. There are a total of 10 points holding the rear axle assembly: - 4x Springs - 4x Longitudal links with rubber bricks with limited longitudal movement (you need a bit of movement in order for axles to flex sideways) - 2x Panhard links which keep the axles from loosely moving sideways Also notice the drive axle on the left, thats for the fake motor drive. More info soon... Edited September 8, 2015 by Zblj Quote
Milan Posted September 8, 2015 Posted September 8, 2015 As always with your designs, i like how sturdy and massive it is. Also great choice of the truck. Whats the plan for the superstructure and boom? Quote
MaxSupercars Posted September 8, 2015 Posted September 8, 2015 (edited) Hmm it looks tasty... :P It's a pity that I have no plenty of free time to build my all Ideas... Superstructure is not important.. Uppsss... Milan is here... :D ...OK I'm looking forward for superstructrure... It will be very interesting MOC... Very good start of contest... I like all the modules you have done... :) Max... P.S.: When I look at chassis, crane part will be very very big... :O Edited September 8, 2015 by MaxSupercars Quote
syclone Posted September 8, 2015 Posted September 8, 2015 (edited) Looks great as always ! Interestig idea with the steering and outriggers Haha, just read the text on the crane- "Chelabinets", that is what I waited, off-road crane only can be seen in Russia... Original : Челябинец. Edited September 8, 2015 by LXF Quote
Nalyd997 Posted September 8, 2015 Posted September 8, 2015 Wow, that is awesome for how long the contest has been open for! Quote
aminnich Posted September 8, 2015 Posted September 8, 2015 Wow, I better just stop building... Because we have a winner! Hahaha I love this it looks like a great build and you have come a far way in a short amount of time. Nice work as always Quote
KirTech LAB Posted September 8, 2015 Posted September 8, 2015 Very promising start! And the original truck is awesome. Good luck! Quote
gerejcvmn Posted September 8, 2015 Posted September 8, 2015 (edited) Very promising start! And the original truck is awesome. Good luck! Edited September 8, 2015 by gerejcvmn Quote
JJ2 Posted September 8, 2015 Posted September 8, 2015 WWoosshh! There goes my chance of winning Great start by the way. Quote
Victor Imaginator Posted September 8, 2015 Posted September 8, 2015 Will be nice to see it finished. After all your crazy offroad beasts, it should be really cool crane) Quote
Awaken_M1nd Posted September 8, 2015 Posted September 8, 2015 Good start. Waiting for cab design. Quote
Lakop Posted September 8, 2015 Posted September 8, 2015 I'm looking for outrigger inspiration so I like your idea. Can't enter the comp as I'm working on my own moc etc but good luck to you and the others taking part. I will watch progress with interest. H Quote
Zerobricks Posted September 10, 2015 Author Posted September 10, 2015 (edited) Progress update The chassis is more or less done, only thing missing are the rear outriggers: The drive has been upgraded to 4 XL motors and the axles have been renforced with additional 9L links: I also started working on big, LOUD boom It can extend over a meter tall: I used LOTS of radiator grills on top part of final stage in order to route the rope which moves the stage... I think its a clever idea So, thats the progress so far... To do list: - rear outriggers - autopump for outriggers - cabin (exterior and interior) - superstructure (all functions, frame, support, etc...) - final touches I am going to take a little break now, so my fingers can recover from the abuse... Edited September 10, 2015 by Zblj Quote
ludov Posted September 10, 2015 Posted September 10, 2015 You're going way too fast, don't you have to work or something? Joking aside: that looks really impressive. With 4XL motors it's going to be the world's fastest crane. How rigid is the boom when extended? I was quite impressed by the boom of 42009 and wondering how to improve on it for my own build (which is progressing so slowly it's almost going backwards I only have about 30-45 minutes per day after work available...) I don't want to copy the 42009 boom, obviously. Quote
MaxSupercars Posted September 10, 2015 Posted September 10, 2015 (edited) Great progress... it's like to watch TV serie... almost every day something new... :D Make of chassis was for you like to make a new taste of ice cream... :D One XL Motor for one axle... great and powerful... I like the chassis... I will be glad to see it moving in real terrain. Looking forward for next progress... ;) Max... Edited September 10, 2015 by MaxSupercars Quote
syclone Posted September 10, 2015 Posted September 10, 2015 (edited) You are really fast! My build only is going in its development and your one is going like a Formula1 pit-stop! Amazing work there! Really like the idea for the rope channel using the grills.Maybe will need some too Edited September 10, 2015 by LXF Quote
JimDude Posted September 10, 2015 Posted September 10, 2015 Are the four XL's still interconnected (via differentials)? If not, won't they be fighting eachother, due to different friction and/or voltage and/or different motor power? It looks as if they are still connected per 2, but I can't really make it out from the pictures. Quote
Milan Posted September 10, 2015 Posted September 10, 2015 Did you consider putting larger tires? I think it would look even more awesome with them. Quote
Imanol BB Posted September 10, 2015 Posted September 10, 2015 I think you will be the winner, until now that crane truck seems amazing, and the outrigger system reminds my the 42043 b model, and the size, the 4 xl motors, the suspension, everything its very clever, good luck in the contest . Quote
Zerobricks Posted September 10, 2015 Author Posted September 10, 2015 Did you consider putting larger tires? I think it would look even more awesome with them. Only bigger tyres left are power puller ones! And I have only 4 of them. Anyone noticed rear wheels are wider than front? Quote
syclone Posted September 10, 2015 Posted September 10, 2015 (edited) I did ,but as I don't have that type of wheel I supposed that they should look like that. Wider rims on the rear ones? And front ones thinner for the steering? Edited September 10, 2015 by LXF Quote
LEGO Train 12 Volts Posted September 10, 2015 Posted September 10, 2015 What a great progress ....I like your step by step building technique! Quote
MajklSpajkl Posted September 10, 2015 Posted September 10, 2015 Yo, you sure a as fast as a bullet, such complexity in so little time. I guess you'lle have plenty of time left to improve it to the last bit. As you can see we're thirsty for more, so keep those updates coming ;-) Only bigger tyres left are power puller ones! And I have only 4 of them. Anyone noticed rear wheels are wider than front? I thought you had 8 of "Technic POWER" tires Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.