MikeTwo9398

You can easy check if the problem is the gearbox or the differentials. Put you gear selector in a neutral position make sure the 3 driving rings are not inside one of the 16 tooth clutch gears (see the picture with the red circle pag 44.) Drive the car. If the wheels are not blocking then the axles + differentials are correctly mounted and there could be something wrong in the gearbox. The orientation of these differentials does not cause the issue but the 12 tooth gears going to the main shaft could. If the wheels are blocking it could be that the 12 tooth gear you add in step 4 page 15 or the 12 tooth gear step 14 pag 59 are mounted the wrong way. These gears couple the wheel axles to the main shaft (which is coupled to the gearbox) between the wheel axles. For the gearbox, only one of the driving rings should be in a clutch gear otherwise the gearbox will be block itself.

Maybe it's a good thing they didn't make the rear axle differential lock automatic. Since this is a manual model, there is a good chance that the gears of the differential in the rear axle will break during driving, especially given the profile of the new tires.

There is a link in that topic from @Chilly where you can still download the file http://www.readypedalgo.co.uk/9398.C.Model%20-%20white%20background.pdf.

Hi kingiswide If you look in the video at 1:25 you can see a drum on the right side of the dashboard. The drum is connected to the shifting part of gearbox. By changing the gear the drum rotates. The sticker on the drum tells you the selected gear. Quite a challenge during construction to get this in the right position

For those who are interested in my construction, here are the free building instructions. While setting up in Stud.io I discovered that I had made quite a few illegal connections. Due to the flexibility and tolerances in the connections, this Arctic Cruiser was still possible. In these building instructions I have replaced those illegal connections with a suitable solution.

I hope everybody did gave the best entries the lowest points. Then I will probably win As what @Seasider is telling: I also entered and voted. When I voted I used my interpretation of your 4 criteria comparing the models against that and to each other based on that. I completely discounted my entry as a participant in my voting and automatically gave it the 1 point that was asked and never compared others to it to work out my order.

There is a 12 tooth gear on top. Looks like it has Hand Of God.

Very nice replica of the Batavia. It looks very much like the real replica that was built in Lelystad at the end of the 1980s until well into the 1990s. I lived in Lelystad at the time and often visited the shipyard where they built the ship. Real craftsmanship, many techniques from back then were used to build it. It would be a shame to break it down (maybe you already did). And if you didn't, make it available for a while and let it shine on the real Batavia....

Arctic Cruiser Task: Takes you quickly from A to B in a snowy environment There is room for 3 (including the driver). Easy boarding through the Gull wing doors. Technical specs: 2 Powered Up L motors drive the 2 tracks at the rear of the vehicle 1 Powered Up L-Motor controls the tilt of the cabin making it turn Contolled by "Audi RS Q e-tron" of the Control+ app. http://www.youtube.com/watch?v=5I2vB-GfSqg Topic link: http://www.eurobricks.com/forum/index.php?/forums/topic/197204-tc26-arctic-cruiser/

Hello all. This will be my design for the Arctic Contest, the "Arctic Cruiser". It is an artcic cruiser that can quickly transport people from one place to another over snow and ice. There is room for 3 (including the driver). He can move very quickly (unfortunately the Lego engines are not, but imagine that) over snow and ice. The Arctic Cruiser is controlled with the Control+ app. For this I use the "Audi RS Q e-tron". Unfortunately the pictures are not that clear as the weather here is quite rainy. There is certainly no snow at all... This was the idea I started working with. Arctic Cruiser I'm a bad builder when it comes to vehicle bodywork. I don't have many orange and white bricks either, so my Ford Raptor was torn down to have some orange bricks. I started with the drive and almost immediately came to the white motor wheel in the track. Fits exactly in the tracks. I think I reassembled it 10 times, but here is the result. Tracks For those who recognize it, I copied the principle of the gull-wing doors from the old 8466. Gull-wing door For the steering, I once again fell back on the tilting chassis, which works fine. Must say that it is easier to realize with the Power Function Servo than with the Control+ motors. Tilting body Video link: http://youtu.be/5I2vB-GfSqg

I had a different issue this week. Try this maybe it helps (reminder: it removes all collected data of the other vehicles in the app): Posted Thursday at 06:02 PM Contacted Lego Service, Issue solved Advice was to delete the Storage and Cache and reinstall the Control+ app on my phone: device settings - apps - control+ - storage and cache After doing so for some reason the Storage was not removed. I delete the Storage and Cache again but did not reinstall the App and then the issue was solved.

Contacted Lego Service, Issue solved Advice was to delete the Storage and Cache and reinstall the Control+ app on my phone: device settings - apps - control+ - storage and cache After doing so for some reason the Storage was nog removed. I delete the Storage and Cache again but did not reinstall the App and then the issue was solved.

Just a question if someone else has the same issue as I do at this moment. When I want to control 42140 with the control+ app on my Android telephone, a Samsung A52, it keeps hanging when the green bar is full. Other vehicles work ok. I tried re-installing the app, restarted my phone, same problem. on my daughters I-phone all works ok. Am I the only one with this moment?

I think the axle below the differntial (the red part) is blocking the movement. It stops moving and then the clicking/slipping of gears start. What is attached to that?

SteinaufStein has a building video of the Mars rover https://youtu.be/wbNARImrAeY