General Magma

Yes, but as far as I know, those are the only small CIS vehicles that appeared on Kashyyyk that don't have too many pieces to be put into a battlepack. Added that as an opponent to the Wookiee battlepack mostly, though.. ~ General Magma

Here are some new ideas of mine: Battle of Kashyyyk (large) Piece count: About 1200 Minifigs: Yoda, Commander Gree, 2x clone scout trooper (Kashyyyk trooper), 2x swamp trooper, 1x clonetrooper w/green markings, 2x Wookiee Warrior, 3x battle droid. (Total: 12) The set includes: Wookiee treehouse with hologram table in the middle, a tree along with some plants, 1x BARC speeder, 1x Wookiee flyer (AKA Raddaugh Gnasp fluttercrafts) and some barricades. Wookiee Attack (new version) Piece count: About 500. Minifigs: Chewbacca, Wookiee Warrior, 2x swamp trooper, battle droid. (Total: 5) The set includes: Wookiee flyer (AKA Raddaugh Gnasp fluttercrafts), AT-RT, Snail Tank droid, dwarf spider droid. Republic Kashyyyk Battlepack Piece count: About 60. Minifigs: 2x Wookiee warrior, 2x clone scout trooper (Kashyyyk trooper). (Total: 4) The set includes: Infantry Support Platform. Battle Droid Battlepack Piece count: About 60. Minifigs: 4x battle droid, 2x super battle droid, 1x battle droid commander. (Total: 7) The set includes: STAP, dwarf spider droid. UT-AT Piece count: About 700 Minifigs: Ki-Adi-Mundi, Commander Bacara, 2x galactic marine, 2x battle droid. (Total: 6) The set includes: UT-AT, STAP. That's my list for now. ~ General Magma EDIT: Added piece counts.

I see. Well, I recently went to Wookieepedia and read that Mama the Hutt actually is a hermaphrodite, but Hutts do have personalities. ~ General Magma

Remember that Lucas and Filoni could change the storyline whenever they want. Ventress either dies or escapes, but Dooku tries to get her dead because he got a new (and better) apprentice. As for the Hunt for Ziro episode, I'm kinda confused now. A female Hutt? Weren't they hermaphrodites? The fight was great, though, and they finally got rid of Ziro. ~ General Magma

Your MOCs never cease to amaze me. This is fantastic, just like all of your other MOCs! The details and structure are both outstanding. Excellent work, I'm looking forward to see more from you. ~ General Magma

Sorry for the double post (it's been 2 days though), but I have a new request for a decal. I'd like a decal for Anakin's torso from Episode III please, just not the official one. I'd like a front and back decal that resembles an intact version of the new one that came in Palpatine's shuttle without the torn/ripped parts and scars: As long as it doesn't have the scars and isn't torn, so it resembles the real Anakin shirt during the battle on Mustafar. Plus the belt from the new official one, and some of the curved "robe lines" if possible: Thanks in advance. ~ General Magma

Looks like we're not getting a TIE Pilot after all... It's a black colored ARC pilot, but that's great too! It's a pretty nice set aswell. The astromech droid is awesome.. The rest of the sets are great too, the T-6 is the lesser of the bunch. The Bounty Hunter gunship (The Halo) is better than I thought. Nice to see that we're getting leg printing in the battlepacks too. I have the feeling they will make a new Jango Fett, since the Deathwatch kinda look like him, except for the blue colors - which should be different. I'm also looking forward to Saesee Tiin, the Gungans, Shaak Ti and Embo.. Saesee Tiin's headpiece would be useful for Iktochi minifigs, Shaak Ti's for other Togruta's. All in all, a decent year. I'm mostly an OT fan, so I'm disappointed there aren't any OT sets this wave, but oh well.. Hopefully 2012 will be better. But that's something to think about by then. ~ General Magma

It's not Darth Maul, it's his brother Savage Opress. I also agree with StoutFiles, the lack of OT sets may hint at a UCS Cloud City. Hopefully it's the right size, with a good amount of minifigs, but just not as expensive as the 10188 Death Star. (If there will be a Cloud City) ~ General Magma

1) Spider droid walker from H3 to H4. 2) MTT from L6 to L7. 3) Droid transport from J6 to J7. 4) Droid transport from P6 to P7. 5) Bloodfin from K2 to K4.

Thanks for the pics! I must say, the V-Wing is quite good. The Battle of Naboo remains to be my favorite of wave 1, though. And yes, all of the Mandalorians have got a jetpack now. ~ General Magma

I agree, in season 2 episode 16, they immediately got rid of the Seperatist Commander Trench already. It's mostly the newly introduced characters that die... ~ General Magma

Dooku's new apprentice, I see. And Dooku is going to get Ventress killed. This season will feature Ventress' death, I'm 99% sure... The series are also getting towards the darker tone.. I have the feeling he's related to Darth Maul, too... At the end of the latest trailer posted, it says "starwars.com/DARTHMAULSECRETS", is it him? Could it be? Or just related to him? On the other hand, I have my doubts too.. Can't wait to see how this unfolds. In the "Hunt for Ziro" preview, I can spot a dead Ziro, and another Hutt, in the background. Sadly I can't watch the episodes on TV, any other solution as to where to watch them? ~ General Magma

My BrickLink order has just arrived. The parts are for my upcoming Mos Eisley (on Tatooine) project, but this is just the start. I'll need loads more pieces to complete it later on. See the parts I bought here. ~ General Magma

Yes, I'll do that too. Thanks for the advice.. I also meant the chrome under the arms, since they may be rubbed off when the arms move. But it's good to know that, then. Thanks! If people have got any other suggestions, I'd like to hear them. ~ General Magma

Hello all. I have been looking for an answer to this question of mine here for quite a long time. The question is: will the movement of arms, legs and other body parts damage the Chrome Darth Vader? I absolutely don't want to damage the chrome, so I need to know if it's safe to use in stop-motion. I noticed chrome lightsabers would lose some of their chrome after some time. If you have had any experience with this, please tell me if it's safe or not to do this. If it's not, I'll try to obtain a second one, although it's hard for me to find a second one that's not so overpriced. Thanks in advance. ~ General Magma

What's with all the spamming in here? On-topic... I believe the advent calendar rumor is quite old, so it might or might not be true. Sugi is just preliminary, hence the odd look. ~ General Magma

1) Dwarf spider droid from O8 to O10. 2) Droid transport from J5 to J6. 3) Droid transport from P5 to P6. 4) MTT from L5 to L6. 5) Hailfire droid from Q2 to Q3.

Yes, that's better! Thanks alot! I'll be posting a pic of the finalized Armored Jedi minifig soon. If anyone is willing to do the Darth Malgus face decal (see one of my posts on the previous page), I'd appreciate it too. ~ General Magma

I think I was unclear, sorry - what I actually meant was that the black part with the 2 brown lines would be placed a little higher, with the belt attached to it. A little lower than I showed in my previous post with the red lines, like the Jedi on the picture has that part placed a little higher too. So the belt would have to go onto the minifig's hip as a decal, but also onto the torso. By the hip I meant a minifig's one, where I place the decal on. The second belt was fine too. Other than that, the metal thing (not on the belt) on the top of the decal is covered by the hood, so if you could make that part bigger so it's still visible if the minifig has the hood on, then that'd be good. See my last post with pictures, the link has the picture in it with the hood issue. Tell me if my post was unclear, then I'll figure something out to precisely show what I need. Thanks! ~ General Magma

Yes, but also meant if the lowest part of the decal (exluding the belt, could go upwards a little, so it makes place for the decal to be on the torso for a bit. Like the first reference pic I posted, where the bottom is closer to the top. The belt would still have to be placed onto the hips for mostly then (else it takes up too much space). Here's what I meant: The metal part on top of it is also blocked by the hood, so if you could make that part bigger (so the parts under it stay intact too, perhaps by putting it a bit down aswell - hope you know what I mean): Click for a pic, it was too big to post If you could do those things, that would be great and appreciated very much! Thanks. ~ General Magma

That's very nice, thanks! Would you mind placing the belt decal on the bottom of the torso, with the lower parts of the torso a bit higher, making place for the decal - if that's not too much asked? (The Jedi on the picture has it aswell, for reference) I think it might look best that way. Thanks again! ~ General Magma

Thanks alot! That's awesome! And if you could add the belt, that'd be great. I don't know where the belt could go onto the torso without overlapping the rest of the decal though, so maybe the belt could go on the bottom of the decal, and the current lower part of the decal could go upwards a bit, making place for the belt. Thanks. ~ General Magma

I'd like a decal for an Armoured Jedi torso (from "Star Wars: The Old Republic"). Thanks in advance! Here is a reference pic: And if you click here, you can find a larger pic. Thanks! ~ General Magma EDIT: I'd also like a face decal for Darth Malgus. I tried to do it myself, but it just didn't work out well, especially the eyes got messed up... Thanks to anyone who is willing to do these. They would come in handy for other people in need of Old Republic decals, too. Here's some reference pics (please also add the mask thing): The second pic shows his mouth, but I added that pic for more details. I'd like to have the face mask from the first pic there. A huge thanks to anyone who is willing to do this!

Thanks for posting that. But.. Don't tell me they replaced the Jedi minifigs in the T-6 with figs we already got! Where are Shaak Ti and Saesee Tiin? ~ General Magma

Thanks all! I appreciate the nice comments. ~ General Magma