sigpro

Deconstructed!!!!!!!!!! "I feel a great disturbance in the Force" (of the Dark Side, of course) It is a pity you had to do so, anyway at least you leave an excellent legacy!

Excellent! The design is very good and it has many facilities. Could you give us a small briefing on its buildings, facilities, personnel... Thanks!

The level of detail is excellent. I would like to ask if you could post a closer pic of the shield generator in the Endor Moc. It could be a good inspiration for my base. I also like the way you finished the landing pad in the Endor Moc too. Do you have a gallery? Thanks!

Very typical, when I was in Newport Beach this year I saw it in every house! Thanks for the idea!

Hi again and thanks for the comments! I show you an overall view of how the hangar will look. I have 6 small pads for the AT-STs. They are 18x18. There is a larger pad for repairs, which measures 22x22. The hangar has another extra room -not pictured- which measures about 48x24. I suppose I will place there the speeder bikes -8 or more-. I hope you like it!!!!

I will wait to know the total weight when it is finished. Up to know you must build -roof (three, I suppose, front, medium and rear) -front and rear side. I suppose that the frame is where the roof and sides will hold, Am I right? And don´t forget the minifigs! Congratulations anyway!

Thanks for the link! I know that this wall is a clear example of the "big gray wall syndrome". I will try to figure out something additional to the wall, but I find it very difficult. Greetings!

Hi! Thanks for the comment on the roof. Its size will be 91x43 including the fences, but the landing platform will be 89x41. I have built 10 custom dropships -well, that work is in progress- and of course Lambda shuttles would fit, but I can´t assure you how many. If I build a custom, maybe 2 or 3 at the same time, but I am not sure. The landing pads measure 18x14 -the inner area-. Maybe I will have to enlarge the landing pads so a larger ship can land safely. Greetings and enjoy!

Excellent detail in everything. The bunker, the minigun, the camouflage, the environment... Very good job!

Huge! When you build it I want to see that! 3 years designing, that´s a lot. Excellent

An excellent from an excellent movie. I don´t know what to say except keep up the good work!

With "the breaking strain of the ankles is about 12lbs before they give way" you mean that 12 lbs per leg is the maximum weight the ankles can stand? Will the legs be poseable? I say, can you move the legs? Thanks!

Thanks for the comments! Indeed, it is a long-time MOC. I began in summer 2008...and of course I didn´t have the parts. I have bought hundreds and hundreds of Light Bluish and Dark Bluish gray plates...almost a thousand 1x16 dark bluish gray bricks...hundreds of other bricks... About ideas, of course I need more ideas! The officers´ mess is a good one, but I have this: -a meeting room for the base. -a meeting room/deskroom for the Snowtrooper unit. -a big common lounge next to the gym, with a small bar. That lounge will have a cinema and any other amusements. I have not told you anything about the jacuzzi, the sauna, the gym, the laundry room... Many necessary facilities in a 5-star base!!!! Greetings!

Nice pics! Your AT AT looks very nice, bigger than mine -58 cms in height- but also heavier. The detail is good, as you used bricks, but, how much does it weigh? I think it won´t be less than 5 kg unloaded -I say, no minifigs, no speeder bikes, no weapons-. I wan´t to see it finished soon!

Hi again! A pic with the appearance of the landing site for the dropships. This landing site will be placed on the roof of the bedrooms -I will post more pics in the future-. The dropships will be controlled by an array of tractor beams that will be located on the first floor of the bedrooms. So all the landing procedure will be automatic, controlled by the operator on the control room -the one that is on the bunker-. It measures 89x41, and will have an additional fence wall with lights. I hope you like the design!

Hi again. Have 2 pics of my neck-body assembly. You can see 3 tiles (red, grey and black) with stud in the middle, can

Let me send you some pics of my AT AT tomorrow and see if that works for your MOC.

The pic of the fight near the bunker is excellent. It is almost a real pic, due to the background you used. Nice job!!!

Thanks! No problem about the troopers. More than 100 "snowies" are ready for action. Enjoy and thanks again!

More updates, for the Command Building A general view of the building, you can see the big communications antenna. - General view of the upper floor You can see: a big control room, with many operators, 2 security droids, 1 R5-D4 and a protocol droid. Commandant´s deskroom and his room -see the white tiles, they are his sheets-. 3 small bedrooms for officers -2 beds per room-. A small bathroom with shower, basin and 2 WC. - A close-up on the control room. - Commandant´s deskroom, with his table, 2 strong boxes and a computer. - Pasamos a la planta inferior. A deskroom for 2 NCOs, which manage the financial and logistic issues of the base, only during mornings. - A small meeting room for 7 persons, with a flat screen and a holographic projector. The other room is another deskroom for 1 NCO. - General view, we can see a small toilet and the Snowtrooper Unit meeting room. - Please, suggest more furniture, grebbles for outside, everything! Thanks and enjoy!

Hi. After many travels abroad and holidays, I bring you a new update. I have focused on the bunker. This bunker, as you know, holds the energy reactors, the shield reactors, the shield projector and a control tower. The control tower has a single operator -an officer- and a security droid. From this control tower he is to check the routes of incoming dropships, security systems -well, there is another control room but I wanted to have two control areas-. The way to go from the lower level -the reactors- to the upper ones is a small elevator. It is not finished yet!!!! Ok, no more chat, have pics!!! New ideas are welcomed!

If you plan to make the AT AT stable you will have to lower the weight in the head, by making it with plates instead of bricks, and put double joints in hips and knees. And add a lot of weight in the rear, has Prateek has said. And if you plan to make the legs poseable -so you can make your AT AT step Luke´s snowspeeder, for example-, use double joints on hips and knees. If not, the AT AT will be very unstable and you won´t like to have your AT AT downed as in Ep V when Wedge Antilles uses his harpoon to tie the AT AT´S legs...That happened to me and it is not a funny moment! Luck!!!

You have many AT AT minifig size in the forum or mocpages. Here you can find the models of Jamie75, Cavegod, Rocko and mine. If you want to inspire on it, here you are http://www.mocpages.com/moc.php/88708 I like the way you fitted 2 minifigs in such a small cockpit. Greetings!

Hi folks! Cavegod, luck on this difficult task. It will take a long time, believe me! If you want inspiration for the inside area of an AT-AT minifig scale, you can check mine. http://www.mocpages.com/moc.php/88708 Anyway, I like the exterior design of the cockpit, it is very realistic. Greetings!

More updates in my base. The building that holds the reactors has been updated inside. Check it and enjoy!! You may check it!!!