Jump to content

Arrow

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    56

  • Joined

  • Last visited

 Content Type 

Everything posted by Arrow

  1. Arrow
    Thanks a lot, I really appreciate your help.
  2. Arrow
    If I connect with a wire, does that create a electrical problem when a motor has current both on pickups and wires?
  3. Arrow
    Hi! I was reading some stuff on the forum, and I read someone that attach on a single car 2 motor linked each other with the wire. Whats the purpose of that? Each motor can take electricity through their contacts. Could someone explain if there are some pros about connecting 2 motors with a wire? Thanks all
  4. Arrow
    Thanks. I only need to know how to open that 2x2 black wire brick without damaging it =(
  5. Arrow
    22awg is the correct diameter of the original wires?
  6. Arrow
    I ll transform the old 4.5v train motor to a 12v.
  7. Arrow
    So, only need to cut that pin and insert the gear. Correct?
  8. Arrow
    Wow! Good job man! I always wanted see what's inside those signals. Good to know there are spare leds working for this beautiful 80's era electronic!
  9. Arrow
    If u use bluebrick you can import it from the software itself ;)
  10. Arrow
    Thanks all!
  11. Arrow
    20 awg is too big!
  12. Arrow
    Ah ok!
  13. Arrow
    Thank you so so much man!!
  14. Arrow
    mmmmh so maybe a black telefone cable, you say?
  15. Arrow
    If its similar, it can be an option!
  16. Arrow
    Thank you all. I wanna use a cable that is quite the same as the original (I dont like custom made cables, but in this case i need to).
  17. Arrow
    Hi everybody! I have 2x 5306c01 and 2x 5306bc046. All the wires are frayed, as always I want to change them, but I want to use a similar wire, like the original ones. But I can't find something online! Could you help me? Many thanks!
  18. Arrow
    Ok, thanks. Tomorrow i will upload some photos.
  19. Arrow
    I tried to place the motor out of the black box and i put the wires on the rails...the motor on both direction is smooth, so the problem is between motor and rails...
  20. Arrow
    Ok thanks i watch it right now...
  21. Arrow
    yep, slipping. The motor is in its position, no movements on it. And all the wires are on it, on the top and not between the wheels...i don't know man. I used the originals 9v gears.
  22. Arrow
    I've got a problem: i have replaced the motor. In one direction it is working fine, not very fast but it is working... the other direction, I hear some strange noise from the motor, and I don't know why...
  23. Arrow
    Question: upper wire goes down and so the other opposite?
  24. Arrow
    Perfect!! Thanks a lot!!
  25. Arrow
    Yes, resolder the connection (or just put together turning the cable with it)...take care not to cut off the thermistor...
×
×
  • Create New...