Search the Community
Showing results for tags 'Skull'.
Found 28 results
-
[WIP] Skull Rock Lighthouse - a tropical pirates haven from sets 71722 + 71717 + 70431
Murdoch17 posted a topic in Pirate MOCs
The light house of Skull Rock was once kept lit by a order of monks, who believed the nearby skull-shaped cliff face (carved by the former native islander inhabitants) was a sign from "The Man Upstairs" that is was an evil place. The monks were later killed off in 1708 by scurvy and other diseases, leaving only one alive who went insane from the ordeal, claiming he saw ghosts of several past wrecked ships' captains. In 1710, the pirate Captain Henry Smithfield of the infamous "Yago" found skull island and skillfully managed to sail through the island coral reefs unaided except by the light and a keen sailor's intuition. He was inspired to take over operation of the light, but eventually had to maroon the mad monk on a nearby deserted island as he was too crazy even for pirates! The light is still lit only occasionally, mostly when trying to wreck merchant and pirate hunter ships onto the reefs to be plundered thereon. This island is known to the area's native islanders as Hazar-dues, or to it's pirate inhabitants and imperial captives as Skull Rock. NOTE: The name of the island is said like the word, "Hazardous" (which is quite apt for it's windswept rocky surface!) I'm taking @Faladrin lead with his similar model and one-upping it to include the entire skull rock, and a dock for pirate ships of all types! NOTES: The set conversion is mostly (98%) finished as of 1/28/21. The as-yet unbuilt lighthouse portion is on order from Bricklink as of yesterday. This new piece will replace the crane section of the dock. I've also realized that all the set 71722's features are tied together by gearing / rods, such as: - The rotating scythes on the walkway to the officer's quarters behind the eyes. - the moving "wave" walkway to the base of the waterfall. (which opens up!) - the lowering / raising of the wooden cage holding the (deceased) bluecoat Admiral. ..and all this is activated by cranking the large U-shaped handle on the left! The front clips of sets 71722 (Skull Sorcerer's Dungeons) connect to a wooden dock model (seen below). The two Ninjago set's (the other is 71717, Journey to the Skull Dungeons) will be modified to have blue parts instead of orange and trans-orange for the bases and "lava drip" parts. I plan on using these sets, plus this dock, in conjunction with my other pirate ships, seen below. Inside the lower portion of Skull rock is the pirates treasure room, with gold aplenty and a few jewels. The upper floor is for the Captain Smithfield when not at sea. Here is the lighthouse proper. The wooden crane is for offloading cargo / loot off the smaller boats after leaving the big pirate ship. The spinning lens idea is from 70431 (Lighthouse of Darkness) from the Hidden Side theme. The front clips of sets 71722 (Skull Sorcerer's Dungeons) connect to a wooden dock model. (seen farther down the page) The two Ninjago set's (the other is 71717, Journey to the Skull Dungeons) are currently being modified to have blue parts instead of orange and trans-orange for the bases and "lava drip" parts. I plan on using these sets, plus all the custom dock / lighthouse parts for my island. This building model comes apart into three modular sections: - lighthouse, lower level (this is sleeping / storage area for the crew when not at sea.) - light house, upper level (storage area for whale oil for keeping the light lit) - actual light - (rotates around, though it's usually lit for use in misguiding ships onto the nearby rocky coral reef surrounding Skull Island.) The docks model also comes apart into three modular sections: - The working wooden crane (left side, which will be implemented into the lighthouse) - The corner with cannon (behind the others) - The dock extension (right side) Here is that unlucky monk today, with his one-shot pistol on Twenty-paces Island. (I'm getting a palm tree for this island.... still have to order the parts!) The whole setup of Skull Rock so far. The Minecraft-based Seacow, as captained by Peg-Leg Stevie. Not sure what to call this type of ship, though it kinda reminds me of the Santa Maria from Columbus' first trip. The brig Yago, as seen here and captained by Henry Smithfield. The Golden Bounty pirate junk, as seen in this topic and led by Captain Soto. (picture of Joly Roger goes here) Captain Hook's Jolly Roger isn't done yet, so no picture or topic... waiting on a certain flying boy for that. The Silver Crab is not built yet, but is captained by Bob "The Sponge" Squarepants and can be found here. This is the Hell Bent, and is led by Captain Victor "Jawbone" Blucher. It can be found here. -
[LDD MOD] The Captain's Daughter Inn at Skull Rock (31109 B-model enclosed tavern building MOD)
Murdoch17 posted a topic in Pirate MOCs
Ahoy there, and welcome to the Captain's Daughter Inn, located on the scenic Skull Rock boardwalk just a stone throws away from the pirate port itself! This Inn has all amenities of (both ship-or-land-based) home, such as five cozy beds and a large wine cellar stocked with all best ale's, beers, wines and spirits. The food served is guaranteed by our head cook Dan "Dysentery" McGee to be the best served in all the world's navies, with no-maggots* crackers a staple of the pre-dinner meal! We are also proud to feature twice-a-week amusements by "Davy Jones and the Cursed Immortals" as our house band on Monday and Friday nights. Come around for such hearty songs such as "Point of Know Return", "Wooden Ships", "Octopus's Garden", with "Hotel in Tortuga" as their usual closer. The rear of the tavern, with the crow's nest-like lookout on top. Inside and upstairs are the (cost is per night) beds. Downstairs is the tavern area. So come on down to the Captain's Daughter Inn, where our famous waitstaff (Moe the waiter on left, Murray the barkeep on right) will treat you like old friends! (*Crackers may or may not contain maggots. Resulting disease may vary; Check with your local barber for more details on whether the crackers may be safe for you!) Davy Jones and the Undead Immortals Band are, from left to right: - Cpt. Vanderdecken, on drums (cursed God on a trip round the horn of Africa, so God cursed him) - Corporal Punishment, on guitar (from a Spanish expedition to El Dorado) - Major Paine, on bass guitar (officer from the English Civil War) - Davy Jones, on vocals (made a deal with goddess Calypso to ferry souls to underworld) NOTE: Their instruments are made from ectoplasm and not visible to living beings, thus they are not visible here. MODEL NOTES: This tavern idea came to me late last night and was built this morning, and is based off set 31109's B-model with the printed sign from set 4193 (The London Escape) from the On Stranger Tides sub-theme of Pirates of the Caribbean. I thought I should build accommodations for my pirate crews upon arriving at Skull Rock, and it will hook into the boardwalk via clips on both sides of the model's dock when built in real life. The rest of the words as written were came up in about 10 minutes before posting this MOD. The song list is the one I thought long and hard about... thinking of REAL songs with pirate or ship themes, however slight, was hard! However, the easiest one to add was because of @Professor Thaum and his awesome pirate-y rendition of Hotel California, as seen in the post linked to above in the actual song list and again here, because I love it so much. Comments, questions, suggestions, and complaints welcome! -
Hi, Let me share with you my custom pirate ship. It's not actually an own creation, it's just a re-design, but I tried to build in some unique solutions, so I think it's in the right topic. I've always been a LEGO pirate fan, but I had only small sets. For a few months I returned to this passion and I started to collect bigger sets from 1990-1994. I prefer pirates and islanders subtheme. I've gotten the Renegade Runner, and I customised it (I've shared it in the improvements topic), but it wasn't enough! I wanted to have a more playable ship. I didn't have so much space and money to collect big ships like BSB or SES, but I really liked the dimensions of the 6271 Imperial Flagship, so I desided to transform it into a pirateship. I've seen good solutions on this site (for ex. from Cherno) and they also inspired me. A wanted to keep the shape of the original ship, with a design of the SES. The sails I've used are from RR (which are perfectly match to the 6271), completed with the main sail from SES (that's also the same size as the 6271's). I've added five minifigs from the SES and three animals too (monkey, parrot and rat). It's not as creative as some ships here, but I'm very satisfied with it. Here's an overview: IMG_4991 másolat by Gyula Herr, on Flickr Thanks for stopped by!
-
ORAKNUNKARO, I pronounced for the third time in a sequence, and with a whisper, a cold wind swept across the room. The dim light of a candle danced and weakened, but survived to expose the blank pages of my unwritten book. From the stillness of the fabric, a red drop tainted the empty surface from within. A spot became a puddle that turned into a lagoon of crimson velvet. I glanced into the forming mirror, and from the other side, a lean figure stared back at me with empty eyes and a raw smile. It didn’t say anything, but of course, it didn’t have to. For those probing eyes that read my thoughts were none other than my own. __________ This is an entry for Week II of the Style it Up Contest by InnovaLug. The proposition was to build something 100% symmetrical. I took this as another opportunity to build outside of my usual castle-medieval theme again. Also, make sure to check my other entries for this contest: Week I: Stag in the Shadows Week III: Self distancing countermeasures Week IV: Yet to come Hope you like it. Let me know what you think.
-
Wild West - Skull Rock silver mine / train tunnel - real life MOC
Murdoch17 posted a topic in LEGO Train Tech
This Wild West model was originally LEGO set 79110 (Silver Mine Shootout) from the 2013 Lone Ranger theme. I added a more reinforced right wall and a real base-plate to support the model, as I know from experience it can be pretty flimsy if handed wrong. I also added the collapsing water tower from set 79111 (Constitution Train Chase) to the front corner as another action play feature. The model has also been heightened by five bricks to allow for regular train cars to pass through, and is now wide enough for custom locomotives with side-rods to fit through, except for the extra-wide time train. The natural rock formation (the skull) on top of the mine gives it it's name, and features a carved out section for two cannons to protect the mine, either from Native Americans wanting their sacred mountain back, or desperadoes looking to cash in on the (supposedly cursed) silver. These viewing windows are so you can look inside the mountain to see the details, such as the not-yet-built Delorean time machine hidden behind the waterfall. The built-in light brick helps illuminate these features. The cannons were placed in the hollowed out rock skull for defense of the mine shaft and surrounding workers camp. The room on the upper left processes different pieces of silver for purity tests via a scale and heated chemical tests. The weight of the silver ingot in question is compared against the known weight of a confirmed silver bar or a weight of the same measure. If the bar is not quite pure enough or is fake, it will weigh different from the known unit. The slide on the right is for the silver to be loaded into train cars waiting below. A six-wide steam train with single-stud overhanging pistons or a caboose with a roof-top cupola can fit through the mountain without any height or width clearance issues. The water tower supplies cleaner water to the work camp, in comparison to the water coming from the underground spring on the left, as that is contaminated with silver bits, and as such is un-drinkable. However, you can "blow out " the supports of the water tower using a Technic lever, blocking the train tracks and destroying the fresh water supply for the camp! Near the top of the mine (just above the water fall) is a spot to place dynamite and "blow up" a section of rock. When not in use, the otherwise loose dynamite piece clips into a black part just in front of the removable rock. This lower wall "blows up" to reveal silver pieces by turning the barrel on the next level. This is where the Deloreran time machine goes when Doc Brown hides it away in 1885 for his younger self and Marty McFly to discover in 1955. I though it would be a neat Easter egg to hide it away in my silver mine... I just need to build it, with the parts showing up (hopefully) very soon. Now compare my model to the original Lone Ranger set (79110) . No nearly enough room for a steam train to fit down that hole in the wall... and besides, it has a ton of gaps in the rock-work that make it seem odd. Anyway, comments, questions and complaints are always welcome, and if anyone wants to see the rest of my western stuff, see this topic here! -
Wild Western "wooden" railroad steam locomotive storage shed (two tracks)
Murdoch17 posted a topic in LEGO Train Tech
This railway shed was inspired by Shaun Baseby (or @lightningtiger here on Eurobricks) and his smaller farm shed from 2014. He designed the basic Technic frame on this shed, and I ran with it to create this wooden western-style steam locomotive shed. This shed is 4 1/4 tracks long with a total of 68 studs from back wall to entrance to the building, along with a 10 stud wide entrance for stream locomotives. The shed features a cow skull on the front above the entrance, just to give it that wild west flair. The rear wall of the shed. The roof of the shed is not removable, but it can fold open a bit on clips. With this view you can see how the Technic frame supports the roof. Here is the scene with the three steam locos stationed at the Fort Legoredo area depot The shed will normally hold my 4-6-0 and 4-4-0 steam locomotives, with the smaller 4-2-4 sitting on a third track outside the shed as shown. That's the BTTF time train on the fourth track, in the way back. Comments, Suggestions and Complaints are always welcome! -
This modular model was inspired by sets 70409 (Shipwreck Defense) and 70411 (Treasure Island) for this small pirate port, with a raft that was mostly taken from set 6240. (Kraken Atttackin') The model also features a crane from a Pirates of the Caribbean combination model called Port Royal, and a dual cannon turret inside a giant swiveling stone skull. (That dual cannon part was inspired by WWII-inspired movie "the Guns of Navarone") The whole model comes apart into three sections: - loading crane - makeshift dock - defense turret The crane can spin around all 360 degrees. This part of the make-shift dock can take "battle damage": the curved section under the cannon falls back a bit, as shown here. The inside of the skull-shaped cannon turret features two guns and a telescope. This part forms most of the skull. This Ninjago part goes on top of the mast as the flag for my pirate's faction. The raft features a sail inspired by Spongebob set 3817, (Flying Dutchman) and a body inspired by set 6240. (Kraken Atttackin') The LDD file for the port ONLY is here. If you are curious what ship calls Skull Island home, please see here for the topic (and LDD file!) on the three-masted frigate "The Terror". The port should be purchased around Christmas of this year! Comments, Questions, and complaints are always welcome!
-
I decided The Nexo Knights Volcano Lair playset needed a little something extra... I added a Skull tower with a throne and a platform for adding ingredients into a cauldron for mixing up magical mischief... Work in progress image... Best picture I could get of the throne
-
Hi, LEGO pirates fans. I uploaded my last creation long ago. This is my next creation – black pirate fortress decorated with a skull at the entrance, with huge rubies instead of eyes. Perhaps they are their trophy from Islanders’ temple. To build it I combined 7396,3053,6241, and a castle of 1995 with the first ghost (6090). It seems, there are no stairs in any pirate sets in 2015. LEGO designers were more attentive to such details before. I know it because I've been collecting LEGO sets for more than 25 years now. Every time I create something, I wonder how other LEGO fans like it. If you like my creations you can support some of them in LEGO ideas. C & C are welcome. Sorry for the quality.
-
Ahh, the magnificent Lord of Skull Spiders. Many thought he was a rather weak set, sacrificing playability and some aesthetic appeal for fairly boring function. Recently, I've been playing around with system-based action figures, and, after seeing all these skull army creations pop up again, I decided to make my own version of him. I decided to make him more spiderlike, with the face of a jumping spider, the horns of a jewelled spider and of course, all eight legs, two spinnerets and two pedipalps. I made the pedipalps the smaller, female morph because I figured that, if they're too small to even be depicted in the actual set, they shouldn't actually be bulky in my MOC. Features string-shooting stud blaster spinnerets, 41 points of articulation and a stand which is supposed to hold the golden mask of skull spiders, although LDD lacks it. As far as I can tell, he's fully buildable. A better look at the stud shooter spinnerets and back. Ventral view of the big spider and his shiny. Comments and criticism appreciated!
-
I made a 4 armed skull guy. I know I am kind of late to the skull MOC party. He's pretty big and has two gearboxes. Here are the pictures. I hope you like it!
-
Here is a quick mod to the Lord of Skull Spiders. I completely rebuilt the torso and took out the grabbing gimmick to install a stud six shooter in his mouth. Cause of this I gave him articulated legs and a small abdomen. Front http://www.brickshel...2015/loss01.jpg Side http://www.brickshel...2015/loss02.jpg Back http://www.brickshel...2015/loss03.jpg Top http://www.brickshel...2015/loss04.jpg Bottom http://www.brickshel...2015/loss05.jpg Mouth open with web shot loaded http://www.brickshel...2015/loss06.jpg Picture will all 12 Skull Spiders & Gold Skull Spider Mask (Lens gave a bit of glare to the eyes but I think it makes him look more evil this way) http://www.brickshel...2015/loss07.jpg .LXF file http://www.brickshelf.com/gallery/takanuinuva/Bionicle2015/thumb/moloss.lxf_thumb.jpg Comments and criticism appreciated
-
Bit late to the party but I needed the parts of the 2016 winter sets to finish these mods. So here are my mods of the Skull Villains. (I've already made a topic for Skull Scorpio so it won't be posted here. But to make up for it. I made a Skull villain for Gali to fight All of the mods save for Skull Grinder have the trans orange removed. I just didn't like it on the others. That's just my opinion Gallery- http://www.brickshel...ry.cgi?f=564493 First off is Skull Warrior. Not many changes to him but I did rebuild the bow so the firing gimmick doesn't turn the whole bow. http://www.brickshel...llwarrior01.jpg http://www.brickshel...llwarrior02.jpg http://www.brickshel...llwarrior03.jpg http://www.brickshel...llwarrior04.jpg http://www.brickshel...llwarrior05.jpg (Weapons stored & holding Kopaka's gold mask) http://www.brickshel...llwarrior06.jpg http://www.brickshel...llwarrior07.jpg Next is Skull Slicer. Main changes are getting rid of the chain weapon to give him a fourth sword. And armor on the trans green bones. http://www.brickshel...ullslicer01.jpg http://www.brickshel...ullslicer02.jpg http://www.brickshel...ullslicer03.jpg http://www.brickshel...ullslicer04.jpg http://www.brickshel...ullslicer05.jpg (Weapons stored & holding Lewa's gold mask) http://www.brickshel...ullslicer06.jpg Next is Skull Basher. Main changes are making the gimmick less lose. It can't swing both arms together but still allows side to side movement. I also gave him a tail and hooves to emphasize the bull aspect a bit more. He has solid purple armor so his horns don't stick out as much. http://www.brickshel...ullbasher01.jpg http://www.brickshel...ullbasher02.jpg http://www.brickshel...ullbasher03.jpg http://www.brickshel...ullbasher04.jpg http://www.brickshel...ullbasher05.jpg (Weapons stored & holding Onua's gold mask) http://www.brickshel...kullbasher6.jpg Next is the villain I made for Gail. I call her Skull Strika. She's based on Aanchir's Skull ripper design but doesn't have any trans light blue parts. Only trans dark blue. She has no legs but instead a large tail with a skull sword for stealing masks. To compensate I built her a stand. Storywise she would be a species like Skull Scorpio and attack the group when there on the way to Ekimu's forge http://www.brickshel...ullstrika01.jpg http://www.brickshel...ullstrika02.jpg http://www.brickshel...ullstrika03.jpg http://www.brickshel...ullstrika04.jpg http://www.brickshel...ullstrika05.jpg (Holding Gali's gold mask) http://www.brickshel...ullstrika06.jpg (Stand build) http://www.brickshel...ullstrika07.jpg Next is Kulta the Skull Grinder. His changes are filling in his torso a bit more. Replacing his black bones with dark grey ones. And removing the small sword he had. He never used it in the animations or book anyways. http://www.brickshel...llgrinder01.jpg http://www.brickshel...llgrinder02.jpg http://www.brickshel...llgrinder03.jpg http://www.brickshel...llgrinder04.jpg http://www.brickshel...llgrinder05.jpg (Weapon stored & holding Tahu's gold mask) http://www.brickshel...llgrinder06.jpg (Weapon stored & putting on the Mask of Creation) http://www.brickshel...llgrinder07.jpg (Posed wearing the Mask of Creation) Finally a group shot including my modded Skull Scorpio http://www.brickshel...ullvillains.jpg Comments and criticism appreciated
-
Hi all! Just uploaded my life-sized human skull to LEGO Ideas! https://ideas.lego.com/projects/142026 It would be great if you could all support my project and help it reach the 10.000 supports goal! Thanks a lot to all of you!
-
I didn't get many Bionicle sets last year, but I am planning to get more in 2016. Is it worth it to get the 2015 Toa or should I just skip them? I'm going to get the Mask Maker vs. Skull Grinder, mainly for the small version of Ekimu and the Mask of Creation in pearl/gold. Are there any other 2015 sets I should get before I get on with 2016?
-
Skull Scorpio is an underrated set in my opinion. Sure it has its flaws but I really liked it. So I've come up with a few alternate designs that you can use to improve your Skull Scorpio set. Gallery when public: http://www.brickshel...ry.cgi?f=560545 Here is an Lxf file of all the different builds. I will update with 2015 bionicle parts if/when LDD Updates. For now I just use replacements in the LDD version. http://www.brickshel...scorpio_mod.lxf First are two different leg designs. One is more like the original and one is similar to LOSS. Both sets of legs have posability. These pictures also show off the new torso I made for Skull Scorpio. http://www.brickshel...rpio_legs_1.jpg http://www.brickshel...rpio_legs_2.jpg http://www.brickshel...rpio_legs_3.jpg http://www.brickshel...rpio_legs_4.jpg http://www.brickshel...pio_legs_5.jpg. http://www.brickshel...rpio_legs_6.jpg http://www.brickshel...rpio_legs_7.jpg http://www.brickshel...rpio_legs_8.jpg http://www.brickshel...rpio_legs_9.jpg http://www.brickshel...pio_legs_10.jpg Next are 3 different claw designs. One of them being the original just without the transparent orange. The third one was slightly inspired by TheDesuComplex http://www.brickshel...pio_claws_1.jpg http://www.brickshel...pio_claws_2.jpg http://www.brickshel...pio_claws_3.jpg Next is two different shoulder designs. One with the arms out and one that brings the arms in close like the original set http://www.brickshel...rpio_arms_1.jpg http://www.brickshel...rpio_arms_2.jpg Last up is the tail. I had a few alternate designs in mind until I came up with these four. The first one is the original just modified to be a bit smaller. http://www.brickshel...rpio_tail_1.jpg The second one was inspired by LoganMcOwen's one http://www.brickshel...rpio_tail_2.jpg The third one is just a standard scorpion tail using the skull villain sword http://www.brickshel...rpio_tail_3.jpg The last one is my favorite. Its a slightly modified version of the one TheScorpionStrike did. Here is his video of how the tail function works And the picture of my version http://www.brickshel...rpio_tail_4.jpg The final pic is how I have my Skull Scorpion displayed just without Pohutu's drained mask . I added that in for effect http://www.brickshel...scorpio_mod.jpg
-
Hello all, I wanted to post the skull that I built for the Rivers of Hell project (https://flic.kr/g/qZVdL). It's my favorite piece from the project and was built to detach from the diorama for display. The skull is life-sized. Skull - Study by The Deathly Halliwell, on Flickr Skull-front by The Deathly Halliwell, on Flickr Skull- side by The Deathly Halliwell, on Flickr Skull-angle by The Deathly Halliwell, on Flickr Thanks for viewing!
-
Skull Island - Skara Kikos by Grant Davis, on Flickr
-
Hello, this is pirates island I made for local contest. Had to fit in 48x48 studs. There is a small story I wrote for it. Check out more photos and story at: http://bricks.kalais.net/post6 Cheers, Kalais
-
The best and worst designed 2015 Bionicle Skull Villains
YellowCorvette posted a topic in LEGO Action Figures
In your opinion, which is the best designed Bionicle 2015 Skull Villains and the worst? For me, the best will be Skull Warrior. He has great weapons design and he very looks like a warrior to me. The worst will be Skull Scorpio. The way Skull Scorpio built is very lackluster and the legs are very bad- designed. -
Skull Villains 2.0 and Ekimu 2.0 - Revamps/Rebuilds
PrimoUltimo posted a topic in LEGO Action Figures
My modifications to skull villains and Ekimu. I especially wasn't fan of orange in other sets then Grinder, and Skull Scorpio (it was really bad set). In Skull Scorpio my inspiration was MOC made by LewiMOC: http://i.imgur.com/9H6RT3C.jpg Ekimu: http://imgur.com/a/QalL8 Scorpio, humanoid form: http://imgur.com/a/SWFJM Scorpio : http://imgur.com/a/gPFWI#0 Uber Skull Grinder (based on combiner): http://imgur.com/a/xVO8t Skull Basher: http://imgur.com/a/VRUsG -
Believe it or not, this is my first time making something besides a car without instruction, and I'm pretty proud of how I used the pieces. This originally started out as just the skull piece with the lower jaw, and I soon put on the ears and crown. What followed was a lot of blocking out the back, until eventually I decided to make it elevated. This is the final result!
-
Hey Guys welcome to my MOC of the Lord of the Skull Spiders in humanoid form during absorbing/fusioning with Pohatu. I love constracting my own canon with Bionicle and I love darker storylines, so here is what happened: When the Toa landed on Okoto, Onua just met Pohatu. They decided to search for the other Toa their Protectors have them told of. On their way they found the Lord of the Skull Spiders and his giant army. Seeing that he has no chance against these Toa, the Lord of Skull Spiders commanded his army to distract Onua and Pohatu, while he could do a ruse on Pohatu. He absorbed Pohatu and gained more power than ever before. Now he could beat Onua and bring him under his controll. It is the destiny of the four Toa left to liberate their Brothers and get rid of the Lord of Skull Spiders. This is my first MOC using CCBS since I stopped collecting BIONICLE in 2007. A wave of nostalgia lead me to buy the new 2015 Bionicle, so =D His Body is pretty simple built since it is Pohatus build. His golden armour is Onua's, I swapped the Onua's golden plates with silver ones because it looks better in my opinion. His extra arms came from the Protector of Fire and his weapons, well, just some old style Bionicle swords :D Will the other Toa defeat this powerful enemy and free their brothers?
-
Hi, A few days ago i finished my sculpture of sull head an put it o Lego Ideas. There are a few pics: https://ideas.lego.com/projects/90201 What did you think about the Model? I designed it first at MLCad, so if you want i can send you the partlist and se Model as a MlCad File. I would be really happy if you Support my Projekt, im Really new at Lego Ideas. Thanks and Nice Day! Paddi
-
Hi folks, I am a long-time Lego-fan, from childhood into adult life, but haven't posted here previously, so I hope that this is ok. Amongst other bits and pieces, I am involved in the world of designer toys and was keen to pursue a crossover into the land of Lego. As such, I have produced a micro-version of Skelevex, the skull-based collaboration between artist DMS and I. This just happens to be compatible with minifigs and is available as a 3D print output from shapeways.com: https://www.shapeways.com/shops/alto Hope you like it! Thanks, chris
