VintageLegoEra Posted April 16, 2014 (edited) Hello Everyone!... Today started unboxing and building my Haunted House. A superb Set..loove it..:) Also, bought some addition sets: Zombie cat, Halloween Accessories and Ghost Clock. Also, will use Green baseplate ( 32x32 and 16x32) to make the house even awesome looking with it as i will attach the gate and other mini sets to it..;) So far, here are the progresses: ----------------------- Here is the Halloween Set done..:) ------------------------ Family Photo with Ghost Clock...loool ------------------------ Unboxed ------------------------ First Part is Done---you can see also the extra pieces left!..:) ------------------------- Here is the Ground Floor is done---Also you can see Extra Pieces left.. So far i really enjoyed the build, so nice and Awesome!...:) Stay Tuned for next by tomorrow! Cheers Edited April 17, 2014 by VintageLegoEra Share this post Link to post Share on other sites
Boettner Builds Posted April 17, 2014 Cool! I just got this after drooling over it since it came out. I haven't started it yet, but I plan to change a few things and also put it on some proper baseplates! Share this post Link to post Share on other sites
VintageLegoEra Posted April 17, 2014 Cool! I just got this after drooling over it since it came out. I haven't started it yet, but I plan to change a few things and also put it on some proper baseplates! you should build it...a very nice set. I am building it with a Stand lamp with yellow bulb...Which gives really the creepy environment..;)..you can notice from my photos Share this post Link to post Share on other sites
VintageLegoEra Posted April 18, 2014 Here is the 1st floor done....it is indeed an enjoying build....! Starting now with the Attic!.... Regards Share this post Link to post Share on other sites
VintageLegoEra Posted April 19, 2014 Here the house is Done.... A great fit of the Grandpa Clock inside the house...:) And now with The house fitted on a Green Baseplates: I have ordered some tiles and some 1x1 slopes to make the way to the gate and the entrance looks more neat on these green plates ( grase ) ;). Hope you liked my Mode... Regards Share this post Link to post Share on other sites
Boettner Builds Posted April 23, 2014 I finished the first two floors today! I'm also going to be puting it on some baseplates, but i'm not sure how many. It's going to be at the end of my town and also have a graveyard. Share this post Link to post Share on other sites
VintageLegoEra Posted April 23, 2014 I finished the first two floors today! I'm also going to be puting it on some baseplates, but i'm not sure how many. It's going to be at the end of my town and also have a graveyard. You will enjoy it especially when you add the bases and graveyard. I did put these beses in a way so the houes will still open as normal...:-) Just waitinf for some tiles so it will look nice. .. Good luck. And yea, I dont mind posting your photos here. So please do it..:-) Share this post Link to post Share on other sites
caseforcalle Posted April 24, 2014 (edited) yes,I'm also going to be puting it on some baseplates, but i'm not sure how many. It's going to be at the end of my town and also have a graveyard.thanks Edited April 24, 2014 by caseforcalle Share this post Link to post Share on other sites
TheLazyChicken Posted April 27, 2014 Wow! I really like how you did this! You have inspired me to put the house on some baseplates! Keep up the great work! Share this post Link to post Share on other sites
VintageLegoEra Posted May 7, 2014 Finally,MOD parts arrived and there it is...! (Also bought all the minifigs associated to (Monster Fighter series-Evil)..Just waiting for the Mummy, werewolf and werewolf Tree. Hope you like it! :) Nice Parking..:) Back Yard: With Secret Rock: Thanks For Looking! Share this post Link to post Share on other sites
VintageLegoEra Posted May 8, 2014 Here some minor change in look for the front-side and back yard: If you have any suggestions, i would be more than happy to know it..:) Regards Share this post Link to post Share on other sites
VintageLegoEra Posted May 8, 2014 And with these baseplates, the house opens smoothly and fantastic..:) yes,I'm also going to be puting it on some baseplates, but i'm not sure how many. It's going to be at the end of my town and also have a graveyard.thanks The house will appear AWESOME with base plates. What i did is, front i used 32x32 and back 16x16 and with this match i obtain a nice finish plus the house opens nicely....also as can be seen from my photos, the baseplates will be enough to include many customs and gives a really nice look. in my opinion , bigger baseplate than what i have, will not reflect the house along with customs. everythings will be far ...:) All the Best! Wow! I really like how you did this! You have inspired me to put the house on some baseplates! Keep up the great work! You Have to mate! Share this post Link to post Share on other sites
badbob001 Posted May 8, 2014 I don't have this yet but I'm planning to and will also put it on base plates so it can integrate with my modulars. My plan is to limit the base plate dimensions to the standard 32x32. Originally, I was going to put the rear on two 8x16 plates and the front on two 8x16 + one 16x32 plates. But I soon realized that by putting the chimney flushed with the edge, the hinges and nearby windows will actually protrude over the edge and make it hard to connect to an adjacent building. Ug. I've seen other modifications where the house is put on a 32x32 base plate and the opening is made possible by putting tiles under the opening part of the house. But when the house is fully opened, the opened portion is elevated and has nothing below to support it, which puts a lot of weight on the hinges. I'm thinking I'll simply going to create a mostly-tiled base for the house and when it need to be opened, it has to be lifted off the base. Or maybe some hybrid design where the rear of the house is on tiled 2 x 8x16 plates that can be manually moved to support the elevated half of the house. Share this post Link to post Share on other sites
VintageLegoEra Posted May 10, 2014 I don't have this yet but I'm planning to and will also put it on base plates so it can integrate with my modulars. My plan is to limit the base plate dimensions to the standard 32x32. Originally, I was going to put the rear on two 8x16 plates and the front on two 8x16 + one 16x32 plates. But I soon realized that by putting the chimney flushed with the edge, the hinges and nearby windows will actually protrude over the edge and make it hard to connect to an adjacent building. Ug. I've seen other modifications where the house is put on a 32x32 base plate and the opening is made possible by putting tiles under the opening part of the house. But when the house is fully opened, the opened portion is elevated and has nothing below to support it, which puts a lot of weight on the hinges. I'm thinking I'll simply going to create a mostly-tiled base for the house and when it need to be opened, it has to be lifted off the base. Or maybe some hybrid design where the rear of the house is on tiled 2 x 8x16 plates that can be manually moved to support the elevated half of the house. Indeed will look nice.... I am also planning to install the werewolf tree in front side of the yard where there is an empty space...guess will be soo nice with a tree...;) hope ti recieve the tree in 2 days time then i will be 100 complete with this set and move to another set ;) Share this post Link to post Share on other sites
VintageLegoEra Posted May 10, 2014 (edited) OK..here i did some space in front yard as can you see. here the Werewolf tree will fit..:) P.S: Will have also all the 6 Moon Crystals. the wolf and the ghost crystals are with me, remaining the rest...:) Regards Edited May 11, 2014 by VintageLegoEra Share this post Link to post Share on other sites
Legononymous Posted May 28, 2014 Looks great! I too will have this set. I definitely like the idea of a graveyard. Share this post Link to post Share on other sites
VintageLegoEra Posted May 31, 2014 Looks great! I too will have this set. I definitely like the idea of a graveyard. Thanks!...you must have this set...it is Awesome!! i am going to post more new photos when it is fully completed with Extra minifigs, .....etc :) so stay Tuned! Share this post Link to post Share on other sites
Boettner Builds Posted June 9, 2014 Buy them while they are still available! I got confirmation from my local LEGO Store that the Monster Fighters Haunted House and been discontinued. No new runs, no nothing, to be sold until they run out! Share this post Link to post Share on other sites
VintageLegoEra Posted June 11, 2014 (edited) Here are more picture with the Tree! Got all the 6 Moon Crystals and Today i got my last waited Mini-figures ( Mummy, Were-Wolf and the Vampire Bat ). Now this set is Complete and look Soo Awesome!. I will take photos of the Mini-figures later this day! :) Enjoy! Edited June 11, 2014 by VintageLegoEra Share this post Link to post Share on other sites
VintageLegoEra Posted June 11, 2014 (edited) Here are some photos with rest of the minifigs..:) Thank you for the watching and comments...Now after receiving these last pieces, the set is 100% complete as the way i want... FIN Regards Edited June 14, 2014 by VintageLegoEra Share this post Link to post Share on other sites
badbob001 Posted June 16, 2014 (edited) I just got this set and noticed that on the back of the box, it says '9468 not included in box'. 9468 is the Vampyre Castle, but I don't see any text or pictures on the box relating to that other set. Well, the boxes are the same size and the color scheme of both sets are the same. The text is very small so I think it's more to protect LEGO when a customer comes back wondering why he or she got the wrong set. If they wanted to avoid confusion before the purchase, they could display the other sets on the back of the box. Edited June 17, 2014 by badbob001 Share this post Link to post Share on other sites
VintageLegoEra Posted June 16, 2014 I just got this set and noticed that on the back of the box, it says '9468 not included in box'. 9468 is the Vampyre Castle, but I don't see any text or pictures on the box relating to that other set. Well, the boxes are the same size and the color scheme of both sets are the same. The text is very small so I think it's more to protect LEGO when a customer comes back wondering why he or she got the wrong. If they wanted to avoid confusion before the purchase, they could display the other sets on the back of the box. U r right or it could be a marketing strategy to make us buy the other set...:-) Share this post Link to post Share on other sites
VintageLegoEra Posted October 6, 2014 I noticed there are 2 types of the mummies from the Moster Fighters series... Will show the difference soon! Share this post Link to post Share on other sites
