TechnicRCRacer Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 10:48 AM, Philo said: How do you know the factory? a code somewhere? Expand Look on the inside of the part, to the right of the outward curved flange. There should be a copyright LEGO text, as well as a mold/position number and part ID. The mold number is two numbers with a dash between them. If the box of the set has R in the code on the tape or box, then it is from the Mexico factory. Quote
Philo Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 3:29 PM, TechnicRCRacer said: If the box of the set has R in the code on the tape or box, then it is from the Mexico factory. Expand Ah OK, it's on the box... Got mine from B&P (in France), so no box ;) Quote
Zerobricks Posted March 9, 2021 Posted March 9, 2021 I checked my parts from the Ferrari and they also show the same failure. I will demand replacment parts from Lego. Also I think a QA-related topic might be in order. Quote
TechnicRCRacer Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 3:34 PM, Philo said: Ah OK, it's on the box... Got mine from B&P (in France), so no box ;) Expand Odd, all 20 that I ordered from B&P were correct and don't have the issue. The B&P parts are almost always from the Denmark factory. Do all the faulty parts have the same mold number? Quote
Philo Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 5:01 PM, TechnicRCRacer said: Do all the faulty parts have the same mold number? Expand 1-01, 9-01, 6-01 and 7-01. I guess it means mold 01 / position 1/6/7/9 ? Quote
TechnicRCRacer Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 5:40 PM, Philo said: 1-01, 9-01, 6-01 and 7-01. I guess it means mold 01 / position 1/6/7/9 ? Expand Strange they all have different positions. My only faulty ones are form 11-01. When I look at the crooked ones the axle hole is almost “mirrored” — the asymmetrical pattern of the axle hole is backwards. Quote
suffocation Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 10:48 AM, Philo said: All I can say is... yuck! Expand Ah, bollocks. I just ordered a boatload of these from B&P - wish I'd seen the pic before finalising my order Quote
Philo Posted March 9, 2021 Posted March 9, 2021 On 3/9/2021 at 6:44 PM, TechnicRCRacer said: Strange they all have different positions. My only faulty ones are form 11-01. When I look at the crooked ones the axle hole is almost “mirrored” — the asymmetrical pattern of the axle hole is backwards. Expand All of mine have assymetry on the same side. Quote
Akassin Posted March 9, 2021 Posted March 9, 2021 (edited) delete Edited March 9, 2021 by Akassin Quote
2GodBDGlory Posted March 9, 2021 Posted March 9, 2021 Now if they could get the axlehole off by, say, 45 degrees instead of a mere one or two, it could be a useful part! Quote
iLego Posted March 10, 2021 Posted March 10, 2021 On 3/9/2021 at 10:13 PM, 2GodBDGlory said: Now if they could get the axlehole off by, say, 45 degrees instead of a mere one or two, it could be a useful part! Expand Quote
Zerobricks Posted March 10, 2021 Posted March 10, 2021 I talked with Lego support, they logged the quality issue regarding part 71708 and they will look into resolving it. Quote
Johnny1360 Posted March 12, 2021 Posted March 12, 2021 Encountered the same issues with my jeep set and those parts. I did notice it was possible to flip some of them around making the problem much less noticable. Not the first time either I have noticed this on other parts as well, although to a lesser degree. Unfortunately it is hard to take as okay, mainly because I tell myself I buy only LEGO products just to avoid such issues. Quote
Vectormatic Posted March 16, 2021 Posted March 16, 2021 Man, i just found this issue from the excavator set thread, and it just totally figures... After slowly getting over my annoyance regarding the Sian's colour problems (and being unable to un-see the colour variations in other sets all of a sudden), ive started looking at some new sets, and this crops up, killing any interest i have in these sets. quite embarrasing, and indeed, a big wake-up call for anyone who was buying only lego to avoid these kinds of quality problems. Quote
anyUser Posted March 16, 2021 Posted March 16, 2021 (edited) On 3/9/2021 at 7:18 PM, suffocation said: Ah, bollocks. I just ordered a boatload of these from B&P - wish I'd seen the pic before finalising my order Expand I got my order of twelfe a few day ago and those align pretty well. They have different mould numbers. I didn't open the excavator yet... Edited March 16, 2021 by anyUser Quote
N-4K0 Posted March 16, 2021 Posted March 16, 2021 I got 2x of the Hovercraft set, got one partially built and the two of those panel extension pieces in that one seem fine. Haven't checked the other one yet. These copies are bought in Norway, I assume we get Lego sets produced here in Europe/Denmark. Quote
TechnicRCRacer Posted March 16, 2021 Posted March 16, 2021 On 3/9/2021 at 7:18 PM, suffocation said: Ah, bollocks. I just ordered a boatload of these from B&P - wish I'd seen the pic before finalising my order Expand All 20 from B&P aligned perfectly for me, so you shouldn’t worry too much since all B&P orders come from the same place (I believe). Quote
astyanax Posted March 20, 2021 Posted March 20, 2021 Well, I ordered 12 of from B&P as soon as they became available in January. About half of them don't line up with the rest. I sent a photo to Lego Service and they replied they'll pass on my feedback to the "quality department" and send replacements. That's nice -- hopefully the next batch is better. :) Quote
Vectormatic Posted March 22, 2021 Posted March 22, 2021 A small remark about colour consistency. Yesterday i took my GT3RS off the shelf, and lo and behold, the curved 3x13s on the roof show some inconsistency as well... Not nearly as bad as what ive seen in some Sian pics, but definitely there... My innoscence is lost :( Quote
Jurss Posted March 22, 2021 Posted March 22, 2021 I also have noticed now for some other older sets some differences, also for black beams, f.i. But they are visible in some bright sunlight, not in full moon lighting conditions. Quote
N-4K0 Posted March 22, 2021 Posted March 22, 2021 A slight color variation that requires (bright) light to see is IMO acceptable, the Sián level... eh, I could accept it, but it's certainly on the border of what should be expected from such a pricy set. Quote
2GodBDGlory Posted March 22, 2021 Posted March 22, 2021 Are these new curved panels in this Space Shuttle? Quote
Frequenzberater Posted March 22, 2021 Posted March 22, 2021 Yes, I already mentioned it in the 2021 discussion thread: On 3/22/2021 at 7:19 PM, Frequenzberater said: There is a new type of technic panel in the recently revealed creator Space Shuttle set: Maybe we can find it in some of the upcoming technic sets too? Expand Quote
vascolp Posted March 22, 2021 Posted March 22, 2021 On 3/22/2021 at 8:22 PM, Frequenzberater said: Yes, I already mentioned it in the 2021 discussion thread: Expand Maybe not quite technic, check video below. Even size, studs... But it is a nice part and a nice set! Quote
TechnicRCRacer Posted March 22, 2021 Posted March 22, 2021 (edited) In @2GodBDGlory’s picture I see white axle ends inside the Technic axlehole brick. Exciting, since Technic parts with axles are quite rare in white. EDIT (again) I was wrong, just a boring old 1x1 beam with 1L axle. Edited March 23, 2021 by TechnicRCRacer Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.