Yoshi648

Check out BrickSet.

I'm in the process of planning out a single-car subway train and I want to install a Power Function light on it for the exterior. The car itself is about 62-studs long and I need just one light on the front and one on the back. The power source is in the center of the car so each of the two lights will have to go around 30 studs from the battery to the light on the train. For those who need a visualization: () <---> [] <---> () () light <---> 30 stud wire length []power function battery box Now my question is, would one set of lights be able to make it that far to each end, or would I have to order two sets with extension wires? Thanks.

I give 2 points to 50) Crash Dummy Entry (Build by Oky Wan Kenobi) and 1 point to 58) Spaceman Entry (Build by greenskull139)

Very impressive! I just love how you even managed to make the stairs come out, and all of this was contained within a 6-wide train. Great job!

The instructions on how to install the windup motor for both models is already included in the physical instruction books. If you look on the last pages you will see that 8242 has an alternate build of a truck and 8240 has an alternate build of a trike. The truck and the trike instructions are not in the physical book, one would have had to go to lego.com/slammer at the time to retrieve the instructions. Unfortunately I was to young back then to think of saving them and thus I don't have them now (though surely SOMEBODY must have them). Or I could just try reverse engineering them.

For Speed Slammer sets 8242 and 8240, LEGO released a set of alternate instructions for each model (a truck for 8242 and a trike for 8240) on their website. However, since these sets were released back in 2001 their webpage is obviously no longer available. I have tried using the Internet Archive Wayback Machine, but the links appear to be broken. Does anyone here by any chance have a copy of either of the instructions saved someplace on their computer and would be willing to upload it for others to use? Thanks

INDEXED 410 – Payloader Theme: Legoland/Vehicle Piece Count: 28 Year Released: 1973 MSRP: ??? Links: Brickset, Lugnet, Peeron, Bricklink *Note: This set was released under the number 604 outside of the U.S.* Ah, classic Legoland. A time before mini-figs ever existed, and cars and buildings could be made with just a few bricks. The part selection was pretty basic: bricks, plates, slopes, windows and wheels were all you needed to construct an entire town. Heavy machinery could be modeled in 4-wide and be just a few bricks tall. For this review we will be taking a look at the 410 Payloader, one of LEGO’s first sets of a bucket loader. So grab a hard hat, we are heading to the construction yard! Box image courtesy of Bricklink. Box Contents Here we have our instructions which are obviously the older style of LEGO instructions. The steps used much simpler imagery, but they get the job done. They show how to build the Payloader in seven steps. This small set has all of 28 parts in it. The more interesting parts of note are the red digger arm, the bucket, the blue 1X2 brick with arm holes, and the blue 2X2 brick with the classic LEGO logo printed on it. Construction In the first few steps we start building up the base. Then add the arms and start building the cab. Add the bucket, the trailer socket and finish the cab. Throw on some wheels. Completed Set And with that we are finished with our nice small model. Here is the back right side. Notice how the back of the cab was left with an empty spot. Here is the left side. Notice how on the top of the arm they made it so you could just push down on the tips it to make the arm lift instead of having to grab by the arm itself. On the front we have the nice LEGO logo shown to remind the forgetful of what they were playing with. You can also see how much space is in the bucket itself, which can't hold more than a few small plates. Finally on the back we have the trailer socket. This was a nice addition to make it able to tow trailers from other sets like 685. Just don’t try to bring it into your layout populated by mini-figs, they may have a problem trying to get in. Other Thoughts Considering this set is nearly 37 years old, I myself am still surprised by how well the bricks have held up. I purchased this set from a thrift store a year ago for a mere 25 cents. Normally when used LEGO is purchased you can expect to see scratches, marks, wearing, discoloration, etc but boy was I surprised to see how all these parts are in mint condition. Even the instructions still looked like they came from a new box and not all ripped up and tattered. The pieces still connect to each other nice and tight and the metal pieces for the wheels haven't rusted. This just shows that with proper care these things can last a lifetime. I really would like to get a small display case to show it off. Conclusion Playability: 8/10 In addition to the standard of having rolling wheels, you also get a fully movable bucket assembly. With it you can pick up smaller pieces and unload them into a dump truck. Design: 7/10 Like all other Legoland vehicles it has a very basic design, but you can still easily identify what it is. Simple yet effective. Parts: 7/10 Like most other older LEGO sets, all you really get are a few basic bricks and plates. However, you do get a bucket assembly and the 2X2 brick with the classic LEGO logo on it is very cool. It was also nice of LEGO to include the trailer socket so you could tow around your trailers. Price: 8/10 Bricklink's history shows them to sell for around $10 USD used. While that is a bit much for a set this size, it is pretty good considering this set is over 37 years old. However, if you are looking for a new boxed set be prepared to fork over about $50 USD. Overall: 8/10 This small machine would make a nice addition to your collection as a reminder of LEGO's past. So what are your thoughts on this classic set?

6854 – Alien Fossilizer Theme: System/Space/Exploriens Year Released: 1996 Piece Count: 50 Minifigs: 1 MSRP: $6 USD Links: Brickset, Lugnet, Peeron, BrickLink On a distant planet, the Exploriens search for alien fossils to aid in their research. Box image courtesy of Peeron Box Contents The instructions are printed on a double-sided instruction sheet. The steps show the model being built in 13 steps. This set consists of 50 parts (not including extras). *Note: The 2X2 black tile should have an alien sticker on it* Interesting parts of note are the 2X2 slope with space display pattern, the 3X2 slope with Explorien logo, the Explorien torso, the magnet holder 2X3, the flexible house 8.5L (one of the first sets to use this part and would be the only white one available for 10 years), and the white space scanner tool. Mini-fig First up is the mini-fig. It is your basic Explorien mini-fig with helmet with green visor. Construction Now we move on to building the fossilizer vehicle. First the base is built up. Then the giant radar dishes are added. Then the wheels and space thruster are added. And finally the crane. Completed Set Time to search for alien remains! Conclusion Playability: 7/10 The crane is a nice addition, although a claw on the end would have been nicer then a magnet. The wheels don’t really roll well on hard surfaces, and the fact they are in all the back, it makes the front drag. Design: 7/10 Other then the wheel flaw, other then that it is fairly simple and blends in nice with the other Explorien sets. Mini-fig: 10/10 Nice Explorien mini-fig with helmet. Parts: 8/10 You get large plastic wheels, a magnet, six hinge pieces, a white hose, two large transparent dishes, and some nice printed parts. Price: 8/10 If this set can be found for $8 or less, this would make a nice addition to your space collection. Overall: 8/10 With a crane, an Explorien figure, and some interesting space parts, this makes for a nice small space set. While the wheels could have been re-worked, the crane with magnet was a nice touch. So what are your thoughts?

INDEXED 6517 – Water Jet Theme: System/Town/Race Year Released: 1996 Piece Count: 28 Minifigs: 1 MSRP: $3 USD Links: Brickset, Lugnet, Peeron, BrickLink For many years, mini-figs have enjoyed being in the water. Whether they are out fishing, patrolling, or just out for a nice ride they have had a wide variety of water-craft to help them stay afloat. During 1996 Lego released Wave Jump Racers where Lego citizens could enjoy a good jet-ski race. However, two jet skis weren’t enough for some towns and they wanted more. Enter the Water Jet. Sharing the same styling as the other jet-skis, this would be a fierce competitor to race with. Box image courtesy of Peeron Box Contents The instructions are printed on a small double-sided instruction sheet (like many other smaller sets). The front shows off the usual assembly of the mini-fig and the buoys. The jet-ski is shown being built in nine steps. The back also shows an alternate model. This set consists of a mere 28 parts (not including extras). *Note: I can’t seem to find the green 1X1 round brick so I have replaced it with a black one* Interesting parts of note are the 2X3 slope brick with red stars, the red mini-fig torso with white stars, and the wedge 6X4 with 3 pattern. All of these parts are printed; however there are stickers of stars to put on the side of the wedge. They printed the number but couldn’t print the stars? Mini-fig First up is the mini-fig. Sporting sunglasses, a helmet and a life vest he is ready to tear up the ocean! Construction Next are the two buoys. They are simple but effective. Thanks to the round dish on the bottom you can touch them and watch them move back and forth as if they were actually in water. Finally the main attraction of the set, the jet-ski. I really like the design of this. It looks sleek and the size is accurate compared to the mini-fig. The color-scheme is nice also. Completed Set Ready to hit the water! Bonus Here is the alternate model as shown in the instructions. It is a small boat. Conclusion Playability: 5/10 While the set itself is nice, there isn't much you can really do with it. It would have been nice if Lego added a shark or a small ramp to increase the playability. Design: 9/10 The jet-ski is sleek and the buoys are a nice touch. Mini-fig: 10/10 Very nice mini-fig with a racing torso, helmet, and life vest. Parts: 8/10 While there aren't many parts in the set, they do come together nicely. Price: 9/10 If you can find this set for $5 or less it is a great pick up. Overall: 8/10 While there is little playability that can had with just this one set, it is still a nice model and worth the price. So what are your thoughts?

Perhaps this would be of help. It tells how to modify two 9V tracks into a crossover, but you can do the exact same thing with the RC track (just you don't have to worry about wiring).

I can build the 4561 Railway Express from memory.

That would be set 6721 Mosasaurus

Huge Pokémon fan here. I have been playing since the days of Gold/Silver (even though I started with Red and Blue). I have played every major game and many of the spin-offs. I am currently playing through HeartGold, which is quickly becoming my top favorite Pokémon game. In addition to the games, I also watch the anime and collect figures/plushies/other random items. I do have a small collection of cards, but I don't really play with them. In addition, I assist my friend (who is a bigger PokéNerd then I) with his website and forum. And obviously I get LEGO involved. My favorite Pokémon are Charizard, Floatzel, Arcanine, Lapras, Torterra, Raichu, and Feraligatr.

Very impressive! :thumbup: It has a very clean look, and has plenty of functions hidden away.

Like the others have said, it is impossible to bring older parts into Digital Designer. However, if you go with another program that uses LDRAW (such as MLCAD or SR3D Builder), then you will have access to practically every part created.

Do the small wheels up front have one or two turning points? I've noticed that in order for locomotives/long cars they need to have two turning points. Some of the longer train cars (like the Metroliner Club Car) have two bogies that allow them to turn. However, since obviously you can't turn the driving wheels from the train itself, you have to give two points to the smaller wheels. Look at the instructions for the Emerald Night (page 56). See the dark gray Technic 1X3 Liftarm? Notice how it gives the front wheels two points to turn so it can go through curves. Also check out RailBricks Issue 6 (page 32) as it shows some more examples. That should probably solve your problem. Other then that you have a very nice train coming along and I look forward to seeing it finished.

Your best bet would be to replace the 9V motor with this Power Function motor, then use this cable to connect the motor to a battery box (which you can probably hide in the tender).

Looks like you also have sets 6537 Hydro Racer 6834 Celestial Sled 6135 Spy Shark 6665 River Runners 1887 Scout Patrol Ship

That is just crazy. I love all the little details that were included, and the size is definitely intimidating. Great job! :thumbup: :thumbup:

My oldest set is the 410 Payloader from 1973. I found it at a thrift store for 25 cents about half a year ago. It had all the parts (and even a few extras), the instructions and the ad (all in excellent condition).

Wow, that is a beautiful building! I love the color scheme and all the little details.

Have you checked out the Brick Flicks & Comics forum? There are plenty of topics there, including these links that can help you getting started with making Lego films.

Lego Technic set 8428 Concept Car had four alternate models that could be built. However, only instructions for one of them were included in the physical instruction book, the others were on the CD included with the set. Due to the age of the CD (and the fact that 8432 didn't include it) the instructions are hard to come across for the other three alternate models. For those of you who are interested in creating the alternate models, I have uploaded the instructions from two of the three alternates to my Brickshelf account. Clicking on the following images will take you to their respective gallery where the instructions can be found. Model 1 (NOTE: Instructions not available yet) Model 2 Model 3

Hello, I have a few sets I would like to review and would be interested in joining. I do have a draft for my first one, but I would be interested ways to make it better.

You can start by going here. Link This is basically an all-in-one installer where is shows everything available and you can pick and choose what you want to install. When you reach step 6 you will be given three options. The first one Basic just gives you what you need to just make the models virtually. The second one Intermediate gives you those plus the tools to make rendered images like this. The third option advanced lets you choose and pick what you want to install.