MAP Tec

Thanks. Glad you like it ^^ Lego Technic Koenigsegg Agera RS Rear Suspension What´s up Lego Technic fans, Here I present the rear axle of the Koenigsegg Agera RS hypercar. This hypercar has a pretty impressive suspension system in real life, which is not easy to replicate ;D Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-219965/MAP Tec/lego-technic-koenigsegg-agera-rs-rear-axle/ I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

Lego Technic Koenigsegg Agera RS Front Suspension What´s up Lego Technic fans, Here I present the front axle of the Koenigsegg Agera RS hypercar. I used the new wishbones from the McLaren P1. These fit perfectly to the mechanism of the suspension ;D Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-221167/MAP Tec/lego-technic-koenigsegg-agera-rs-front-suspension/ I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

Thank you ;D. No, they are whole 3L blue pins, you have to be creative ^^ :D

Yes, and it works quite well. There are no problems when the battery box is fully charged, but it drains very quickly. However, I think the motors also overload it if I drive forwards and backwards too quickly and the battery box then switches itself off :D

Glad you like it and you're welcome for the smile ;D

What´s up Lego Technic fans, here I present you my first almost finished Lego Technic RC buggy. I used the axles that I have already presented in a video. I have installed four RC buggy motors, the speed is great, but due to the lack of differentials in the axles, the curves are a big challenge for the tires. That's why I didn't finish this buggy. The front axle and the rear axle can be easily adjusted in height, here you can still see it manually. This function would be very easy to implement with an L-motor. I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

Lego Technic Height-Adjustable Front Suspension for 1:8 Hypercar What´s up Lego Technic fans, Here I present a Lego Technic Height-Adjustable Front Suspension for a 1:8 Hypercar. In addition to the height-adjustable suspension, there is of course a steering system with a moving steering wheel and HOG. There is also a connection to a throttle control. There are up to four connection options for functions on the dashboard, three of which are already occupied. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-221077/MAP Tec/lego-technic-height-adjustable-front-suspension-for-18-hypercar/ I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

What´s up Lego Technic fans, Here I present a height-adjustable axle with steering for a buggy, for example. The mechanism is quite simple, but very efficient. It's just a matter of changing the torque and so the suspensions remain stable in their position ;D. Two RC buggy motors are already built into the axle to transmit the full power. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-220569/MAP Tec/lego-technic-height-adjustable-axle-with-steering/ I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

I believe that too. Thank you :D

What's up Lego movie fans, here I present my newest MOC, Sauron's journey. Why I built it: I love “The Lord of the Rings” and also “The Hobbit” and in both films Sauron has an incredible presence. I made a little joke out of it and took Sauron's eye out of context. The eye got lost and ended up in a city. Now it's standing on the terrace of a house and unintentionally frightens a resident who just wanted to listen to music outside in peace. In the living room, his buddy is watching a live television broadcast showing that Sauron's eye is on the loose in the city. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-220474/MAP Tec/saurons-journey/ I hope you like and support my work. Criticism is always welcome :D! With kind regards MAP Tec Instagram: maptec.baut

What´s up Lego Technic fans, Here I present a height-adjustable front axle for my RC Buggy. The mechanism is quite simple, but very efficient. It's just a matter of changing the torque and so the suspensions remain stable in their position ;D. Thanks to this design, the body frames move with the tires. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-220255/MAP Tec/lego-technic-height-adjustable-front-axle/ I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut

What´s up Lego Technic fans, Here I present a height-adjustable rear axle for my RC Buggy. The mechanism is quite simple, but very efficient. It's just a matter of changing the torque and so the suspensions remain stable in their position ;D Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-220472/MAP Tec/lego-technic-height-adjustable-rear-axle/ I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut

Thank you so much. I agree with you, it is a bit of a fiddly job ;D. I actually had to laugh myself when I found out the mechanism and how simple it is :D:D:D I don't think it should be that difficult to realize this in a modern version :D, but the seat in this set is also ingenious.

Thank you :D Glad you like it. Thanks ;D

What´s up Lego Technic fans, Here is a nice little MOC from me. A Lego Technic seat that can be adjusted like a real one. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-219448/MAP Tec/adjustable-seat/ I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut

What´s up Lego and Medieval fans, Here I present my latest MOC. It is a large castle in the mountains with many details from all sides. Why I buildt it? I love the theme of the Middle Ages and also huge castles, but building them in minifigure scale is understandably too big. That's why I built them in microfigure scale with lots of details and I'm quite happy with the result. My model Size: Length: 52cm Width: 52cm Height: 26cm Pieces: 3792 I have a lot of ideas for castles in different places in my head at the moment and this is the current result. You can see five smaller mountains, four of which are connected by stone bridges. The “tree of life” grows in the middle, from which water flows in all four directions, creating four rivers. Four ships can be seen on the rivers, four heading for the harbor and four going on an exploration tour. Nature can be seen everywhere with lots of greenery and numerous trees. Mountain One: Here you can see district number one, with many different houses, a cobbled path and scattered trees. It is all protected by a wall with towers. Two gates provide access to the other areas. Mountain Two: Here you can see district number two, with many different houses, a cobbled path and scattered trees, similar to the first district. It is all protected by a wall with towers. Two gates also provide access to the other areas. Mountain Three: Here you can see a small church with a few trees around it. Mountain Four: Here comes the actual castle with four brute towers on one side and another four large towers higher up. The king can look out over his kingdom from all sides. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-217532/MAP Tec/castle-in-the-mountains/ I hope you like and support my work. Criticism is always welcome! With kind regards MAP Tec Instagram: maptec.baut

What's up Lego movie fans, here I present my newest MOC, the Blockbuster on Friday/Sunday. Why I built it: I'm another person who still watches movies on TV and doesn't use streaming services. Every Friday and Sunday, the credits roll before the movie with the big B for blockbuster and countless spotlights illuminating the big B and a slightly mystical mountain landscape with fog and clouds floating above the ground. This recently gave me the idea of recreating this with Lego. In this day and age of streaming services such as Netfilx & Co., this MOC should remind us of the good old days. While watching a great movie or blockbuster, this MOC reminds us of what directors, actors, etc. have created all over the world and continue to create for us viewers. My thanks therefore go to all the people who fill wonderful hours of my life with breathtaking movies and create moments that I like to remember again and again. I hope everyone else here feels the same. You can find instructions at rebrickable.com: https://rebrickable.com/mocs/MOC-219131/MAP Tec/map-tec-presents-the-blockbuster-on-fridaysunday/ I hope you like and support my work. Criticism is always welcome :D! With kind regards MAP Tec Instagram: maptec.baut

Glad you like it. I agree with you, which is why I now love the miniature scale of this theme world. Another MOC will be released soon :D

What's up Lego Technic and Interstellar fans, here I present my newest MOC, the ending scene of the movie "Interstellar" You can see humanity's new home, depicted as a section of the new space station. At the end of the movie, Cooper is seen waking up in a hospital (here the two white buildings) and looking at a baseball field (also shown here). Building this new world wasn't easy, as you only see a few snippets of it in the movie. However, the baseball flies straight up and when Cooper looks after the ball, the ceiling is practically a city with lots of detached houses. I tried to depict this in my MOC. On the plane you can see a path from the hospital that leads to Cooper's house and his fields. Around Cooper's house you can see the huge fields and small buildings that slowly rise against gravity. As in the movie, sunlight presumably appears through a hole. I have also represented this with a small sun in front of the tube, in which I have installed a glowstone. Next to the sun you can see the speeding ship that Copper and his travelers were on. You can find instructions at rebrickable.com: https://rebrickable.com/mocs/MOC-216987/MAP Tec/interstellar-ending-scene-a-new-home/ I hope you like and support my work. Criticism is always welcome :D! With kind regards MAP Tec Instagram: maptec.baut

What´s up Lego fans, I hereby present my thanks to one of my favorite bands “Imagine Dragons”. Their album “Night Visions” was released 13 years ago, but the songs are still an absolute masterpiece for me. You can see the picture of the album in this MOC. Let's see how many Imagine Dragons fans there are on this platform ;D. You can find instructions at rebrickable.com: https://rebrickable.com/mocs/MOC-218126/MAP Tec/imagine-dragons-night-visions/ I hope you like this MOC. Criticism is always welcome! With kind regards MAP Tec Instagram: maptec.baut

The final Venator with a video will come soon. Thanks that you like it :D

What´s up Lego Interstellar fans, here I present a scene from the awesome movie "Interstellar". Cooper's legendary phrase is simply brilliant, as he recognizes mountains as water waves and the flight must be started immediately. Instructions are available on rebrickable.com https://rebrickable.com/mocs/MOC-216601/MAP Tec/interstallar-those-aren-t-mountains/ I hope you like it. Criticism is always welcome :D! With kind regards MAP Tec Instagram: maptec.baut

Thank you very much Feuer Zug :D

What's up Lego fans, here I present my latest and smallest MOC ever. Why I built it Spring is coming, and there's no better way to represent this in Lego than a seed that slowly but steadily grows into a tree over the next few years. I therefore built five stations, starting with the seedling on the left, which sprouts from the ground, grows slowly and then gets bigger and bigger. In the end, this small plant grows into an apple tree (right) that bears numerous fruits. Animals such as birds and butterflies also feel very much at home here. The roots of the tree also get bigger, stronger and more resilient with each stage. Size: Length: 51cm Width: 7cm Height: 18cm Parts: 748 Instructions are available on rebrickable.com. https://rebrickable.com/mocs/MOC-217622/MAP Tec/nature-comes-to-life/ I hope you like my idea and support my MOC. Criticism is always welcome. With kind regards MAP Tec Instagram: maptec.baut

Oh no, you actually see the new Venator . But okay, I hope you like it ^^. Final details will come at the weekend Yes, I also find it exciting how building skills develop and improve over the years :D. As already described, the new Venator is expected to be released at the weekend...