MAP Tec

An update with two new features. The hood and trunk have a locking mechanism ^^

That looks cute and I love it. Very good use of parts ^^

An again an update. In addition to the height-adjustable suspension, the trailer coupling is now also complete. Which version do you prefer: 1 or 2? Let me know... :D

An again an update ^^

And again an update ^^

Well, never say never. Someone always starts somewhere. Thank you for liking it :D

What´s up Lego fitness fans, Here I present a working Fitness Power Station. Exercising, especially strength training, is so extremely important and healthy and I hope you do it regularly. If not, this little MOC will serve as a motivational boost ;D. Instructions are available! I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

Ah okay found it, thanks ^^, but even if these are better, I'll wait and see if I use them, because as I said, I'm still more of a fan of the old technology ;D

I'm not that familiar with the new technology, could you be a bit more specific about what you mean (I'm still a fan of the old technology haha)? So far the motors have managed it, but thanks for the suggestion ;D

Update: The basic design is already right, but the rear axle still needs to be replaced and the height-adjustable suspension is still missing... Otherwise, a few new functions have been added. Now you already have an idea of what this pick-up will look like in the end and what functions it will have :D I hope you like my work and support it, criticism and suggestions are welcome as always ;D

Thank you very much, Lego V8 :D

Thanks for the comment and the suggestions :D I will leave the front suspension as it is, as the suspension has a 9 length and needs to be centered so that the full strength is transferred and parts don't bend, so I can't lower it... I've already made a lot of progress with the rear axle, pictures and videos will follow soon, but the pick-up is a real challenge and even though I'm trying to build everything as realistically as possible, I'm not too familiar with the various wheel suspensions ;D

I was planning to use the 1:8 scale like my eight hypercars, but then the pick-up would be even bigger... so at the moment it's 1:9 scale :D

The front suspension: The improved front suspension: What´s up Lego Technic and car fans, Here I present the ultimate Ford Raptor F-150 or the first part of it ;D, the front suspension. This pick-up is my absolute dream car and realized in Lego I will build in as many functions as possible (even if some don't exist in real life haha). Here you can get a first impression of the construction process so far. I don't know if 4 L-motors are enough for the drive, 4 XL-motors would be ideal and powerful enough in my opinion, but they take up too much space, which I need for other functions... At some point I will definitely finish this Pick-up and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Drive (four XL-Motores or four L-Motores) 2. Steering (Servo Motor) with working steering wheel and moving front lights 3. Differential lock for front axle (one M-Motor) 4. Differential lock for rear axle (one M-Motor) 5. Differential lock from RWD to AWD (one M-Motor) 6. Height-adjustable Suspension (one L-Motor) 7. Working V8 Engine 8. Openable hood and doors with functioning door handles 9. Cable winch at the front via mechanism behind the license plate (two M-Motores) 10. Retractable boarding aid (one M-Motor) 11. Extendable trailer coupling (one M-Motor) 12. LEDs for front light and rear light (one M-Motor) 13. Adjustable seats 14. Movable rear-view mirrors and exterior mirrors and sun visors When all these functions are implemented, I'll be absolutely happy hahaha

Thank you, glad you like the new version :D. Yes, I know it comes across as a bit strange to publish 8 unfinished carts, but I'm not getting anywhere with any of them and wanted to see how they were received here first ;D

Thank you very much. It's a completely new chassis ;D

Thank you. Glad you like it :D

What´s up Lego Technic and car fans, Here I present the eighth of eight 1:8 hypercars, the SSC Tuatara Striker. Each of my eight cars has its own individual color mix, here we have black and dark azure blue, a perfect match for the car in my opinion. As you can see, there are unfortunately a few Lego parts not available in black, so I'll have to improvise and wait for them to appear in white at some point... Fun Fact: The dashboard features three cogwheels with 1x1 tiles representing the colors of the country in which the hypercar is produced, seen here in red, white and blue for USA. The functions are gearshift, steering and height-adjustable suspension (hopefully ;D) I used Anto's design for the gearbox: https://rebrickable.com/mocs/MOC-26948/Anto/compact-8-speed-sequential-gearbox/#details At some point I will definitely finish this car and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Suspension 2. Openable doors with working door handle 3. Openable hood 4. Openable trunk 5. 8-speed gearbox and Drive - Neutral - Reverse and working V8 Engine 6. Working handbrake 7. HOG Steering with working steering wheel 8. Full interior with adjustable seats, glove compartment and rear view mirror ------------------------------------------------------------------------------------------------------------------------------ Optional: 8. Maybe Height-Adjustable Suspension 9. Front lights move with steering 10. Moving rear spoiler 11. Sun visors 12. Tank cap, can be opened by lever from the interior 13. Trunk and hood can be opened via lever in the interior

What´s up Lego Technic and car fans, Here I present the seventh of eight 1:8 hypercars, the Porsche 918 Spyder Gulf Edition. Each of my eight cars has its own individual color mix, here we have dark azure blue, orange and light bluish gray, a perfect match for the car in my opinion. As you can see, there are unfortunately a few Lego parts not available in dark azure blue, so I'll have to improvise and wait for them to appear in white at some point... Fun Fact: The dashboard features three cogwheels with 1x1 tiles representing the colors of the country in which the hypercar is produced, seen here in black, red and yellow (gold ;D) for Germany. The functions are gearshift, steering and height-adjustable suspension (hopefully ;D) I used Anto's design for the gearbox: https://rebrickable.com/mocs/MOC-26948/Anto/compact-8-speed-sequential-gearbox/#details At some point I will definitely finish this car and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Suspension 2. Openable doors with working door handle (old picture) 3. Openable hood 4. Openable trunk 5. 8-speed gearbox and Drive - Neutral - Reverse and working V8 Engine (old picture with white seats) 6. Working handbrake 7. HOG Steering with working steering wheel 8. Full interior with adjustable seats, glove compartment and rear view mirror ------------------------------------------------------------------------------------------------------------------------------ Optional: 8. Maybe Height-Adjustable Suspension 9. Front lights move with steering 10. Moving rear spoiler 11. Sun visors 12. Tank cap, can be opened by lever from the interior 13. Trunk and hood can be opened via lever in the interior

What´s up Lego Technic and car fans, Here I present the sixth of eight 1:8 hypercars, the Lamborghini Aventador LP 700 4. Each of my eight cars has its own individual color mix, here we have lime green, black and dark bluish gray, a perfect match for the car in my opinion Fun Fact: The dashboard features three cogwheels with 1x1 tiles representing the colors of the country in which the hypercar is produced, seen here in green, white and red for Italy. The functions are gearshift, steering and height-adjustable suspension (hopefully ;D) I used Anto's design for the gearbox: https://rebrickable.com/mocs/MOC-26948/Anto/compact-8-speed-sequential-gearbox/#details At some point I will definitely finish this car and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Suspension 2. Openable doors with working door handle 3. Openable hood 4. Openable trunk 5. 8-speed gearbox and Drive - Neutral - Reverse and working V12 Engine 6. Working handbrake 7. HOG Steering with working steering wheel 8. Full interior with adjustable seats, glove compartment and rear view mirror ------------------------------------------------------------------------------------------------------------------------------ Optional: 8. Maybe Height-Adjustable Suspension 9. Front lights move with steering 10. Moving rear spoiler 11. Sun visors 12. Tank cap, can be opened by lever from the interior 13. Trunk and hood can be opened via lever in the interior

That is feasible in itself, but I will leave it at this design ;D. But there are also other Lego MOC designers who have managed this system, such as “Dugald Lego”. He built the successor of the Agera, the Regera ^^

Thank you very much :D Glad you like it and thank you for this nice comment :D. The Koenigsegg has a Triplex Suspension System, which I have tried to implement. Have a look at a few pictures on Google ;D. It improves the handling under extreme acceleration. The system consists of three dampers on the rear axle, with the third damper taking on a lateral function to stabilize the vehicle when driving straight ahead.The Koenigsegg has a Triplex Suspension System

Front Suspension: What´s up Lego Technic and car fans, Here I present the fifth of eight 1:8 hypercars, the Ferrari LaFerrari FXXR. Each of my eight cars has its own individual color mix, here we have red, black and blue, a perfect match for the car in my opinion Fun Fact: The dashboard features three cogwheels with 1x1 tiles representing the colors of the country in which the hypercar is produced, seen here in green, white and red for Italy. The functions are gearshift, steering and height-adjustable suspension (hopefully ;D) I used Anto's design for the gearbox: https://rebrickable.com/mocs/MOC-26948/Anto/compact-8-speed-sequential-gearbox/#details But I don't think I'll be able to match the design and functions of Thijs de Boer, except that this Ferrari still has a working handbrake. But that's all there is to it hahaha. At some point I will definitely finish this car and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Suspension 2. Openable doors with working door handle 3. Openable hood 4. Openable trunk 5. 8-speed gearbox and Drive - Neutral - Reverse and working V12 Engine 6. Working handbrake 7. HOG Steering with working steering wheel 8. Full interior with adjustable seats, glove compartment and rear view mirror ------------------------------------------------------------------------------------------------------------------------------ Optional: 8. Maybe Height-Adjustable Suspension 9. Front lights move with steering 10. Moving rear spoiler 11. Sun visors 12. Tank cap, can be opened by lever from the interior 13. Trunk and hood can be opened via lever in the interior

What´s up Lego Technic and car fans, Here I present the first of eight 1:8 hypercars, the Bugatti Chiron Pur Sport. Each of my eight cars has its own individual color mix, here we have dark blue, black and dark tan, a perfect match for the car in my opinion. As you can see, there are unfortunately a few Lego parts not available in dark blue, so I'll have to improvise and wait for them to appear in white at some point... Fun Fact: The dashboard features three cogwheels with 1x1 tiles representing the colors of the country in which the hypercar is produced, seen here in blue, white and red for France. The functions are gearshift, steering and height-adjustable suspension (hopefully ;D) I used Anto's design for the gearbox: https://rebrickable.com/mocs/MOC-26948/Anto/compact-8-speed-sequential-gearbox/#details At some point I will definitely finish this car and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Suspension 2. Openable doors with working door handle 3. Openable hood 4. Openable trunk 5. 8-speed gearbox and Drive - Neutral - Reverse and working V16 Engine 6. Working handbrake 7. HOG Steering with working steering wheel 8. Full interior with adjustable seats, glove compartment and rear view mirror ------------------------------------------------------------------------------------------------------------------------------ Optional: 8. Maybe Height-Adjustable Suspension 9. Front lights move with steering 10. Moving rear spoiler 11. Sun visors 12. Tank cap, can be opened by lever from the interior 13. Trunk and hood can be opened via lever in the interior

Front Suspension: Rear Suspension: What´s up Lego Technic and car fans, Here I present the third of eight 1:8 hypercars, the McLaren P1 GTR. Each of my eight cars has its own individual color mix, here we have orange, black and dark blue, a perfect match for the car in my opinion. Fun Fact: The dashboard features three cogwheels with 1x1 tiles representing the colors of the country in which the hypercar is produced, seen here in blue, red and white for Great Britain. The functions are gearshift, steering and height-adjustable suspension (hopefully ;D) I used Anto's design for the gearbox: https://rebrickable.com/mocs/MOC-26948/Anto/compact-8-speed-sequential-gearbox/#details At some point I will definitely finish this car and make a construction manual for it :D I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1. Suspension 2. Openable doors with working door handle 3. Openable hood 4. Openable trunk 5. 8-speed gearbox and Drive - Neutral - Reverse and working V8 Engine 6. Working handbrake 7. HOG Steering with working steering wheel 8. Full interior with adjustable seats, glove compartment and rear view mirror ------------------------------------------------------------------------------------------------------------------------------ Optional: 8. Maybe Height-Adjustable Suspension 9. Front lights move with steering 10. Moving rear spoiler 11. Sun visors 12. Tank cap, can be opened by lever from the interior 13. Trunk and hood can be opened via lever in the interior