MAP Tec

What´s up Lego Star Wars fans, Here I present my biggest and best MOC of all time, a completely motorized Venator!!!! I have realized all functions from the Star Wars movies and series, even the openable main hangar with flying out gunships! I have always wondered why there is no one who realizes all the functions of this spaceship, since it offers enough space for engines and technical functions... Here, too, I “unfortunately” had to resort to two battery boxes from MouldKing, for the same reasons as with my Tumbler. I installed another Chinese battery box for the lighting. This won't go down well with Lego fans, of course, but with the exception of the battery boxes and the LEDs, ALL the parts and motores are made of 100% Lego. The building instructions are not yet available, but I'm working on it! I hope you like and support my work ;D. Criticism is always welcome! With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos Functions: 1.Movable front guns 2. Movable main guns 3.Openable side hangar 4.Openable lower hangar 5.Gunship flies out of the lower hangar 6.Openable main hangar 7. Gunships fly out of the main hangar 8.Tilting the Venator to both sides 9.Full lighting

Thank you for this nice comment :D. I used the "new" differential "65413" with 24 tooth. The first version of this buggy is bigger and heavier than the second, which also affects the speed. What's more, I only use one battery box :D

Thanks for this great comment! I also loved this technic era. Unfortunately a total failure on rough terrain

What´s up Lego Technic fans, here I present version 1 of my Lego Technic RC buggy. It basically only has rear-wheel drive (4 RC Buggy Motores), but a lever can be used to switch to all-wheel drive. The buggy also has height-adjustable suspension with some nice gags. Also there is a moving steering wheel and LEDs at the front and in the back ^^ I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos The front: The back: From RWD to AWD: Steering wheel:

Thank you very much ;D

What´s up Lego Technic fans, here I present version 2 of my Lego Technic RC buggy. It basically only has rear-wheel drive, but a lever can be used to switch to all-wheel drive. The buggy also has height-adjustable suspension with a few nice gags. The exhaust pipes move at the rear, while the friendly face at the front changes to a belligerent one ;D. The seats can also be adjusted to different positions. I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos The front: The back: Side view:

What´s up Lego Batman fans, here I present finally the ninth and last part of my Tumbler project, my complete MOC. There is a lot to discover!!! Even in the darkness ;D I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, here I present the eighth part of my Tumbler project, the Tumbler. Like all of my MOCs this one should also have functions and imitate the real one as good as possible. Therefore the Tumbler is beside my Venator MOC number 2 among my 10 Lego life's work and of course motorized. And there are many reasons to do that…. I uploaded the Tumbler to this website a year ago. Now I've made a new (better) video for it and have also finished the building instructions :D Functions: 1. Drive ( powered by 2 XL-motores ) 2. Steering ( powered by 1 servo motor ) 3. Four shooting pins ( powered by 1 M-motor ) 4. Openable roof ( powered by 1 M-motor ) 5. Moving wings on the roof and side ( powered by 1 M-motor ) 6. Front LED-Lights ( powered by 5 Lego LED-Lights ) 7. Full front and back suspension 8. Moving steering wheel 9. Adjustable seats I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, here I present the seventh part of my Tumbler project, the Controler. Above and below the remote control, I have illustrated the functions with different parts for the sake of understanding. There is also a long rod with which the tumbler is switched on and off and two gear wheels with connectors with which the two seats of the tumbler can be adjusted. I know I'm using a Chinese brand (MouldKing), but there are good reasons for that. I thought long and hard about whether I should buy this brand's battery box or not and in the end there was more to be said for it than against it. The battery box with the matching remote control meets all the criteria from a wide range of suppliers to be installed in the tumbler. Of course, I can understand if this bothers many people and that is their right... I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, here I present the sixth part of my Tumbler project, the Bat. You can open and close the wings of this really big bat using a small cogwheel function. You can also use another small cogwheel function to make the head nod off and turn the head 360° with your hand. There are two light-up stones built into the head itself, allowing the two eyes to light up. The bat itself serves as the guardian of the tumbler's remote control ;D. I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, here I present the fifth part of my Tumbler project, the Batman. In front of Batman is another line from the movie, which he says himself and reads as follows: “I´ll brought mine”. Two real bats fly in the air behind Batman. I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, Here I present the fourth part of my Tumbler project, Batman vs Joker. Batman is flying in the air and attacks the Joker with his bat weapons. The Joker fights back with a rocket launcher, which he fires and then throws dynamite at Batman. Both characters can each be illuminated by a glowstone. In front of the platform, I have written the phrase “The Ultimate Tumbler” on printed 1x1 tiles. I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, Here I present the third part of my Tumbler project, the Bat Signal. The Bat Signal can be adjusted in various directions and rotated 360 degrees. A light stone is installed at the front, which projects a bat symbol into the sky at night. I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, Here I present the second part of my Tumbler project, the Joker. I have placed a glowstone in front of the face, which really comes into its own in the dark. On the back there is a small weapon arsenal of the Joker ^^ I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

What´s up Lego Batman fans, here I present the first part of my Tumbler project, the Bat Cave. Inside I have placed a light brick that lights up the cave in the dark. This allows you to see many bats on the ground and upside down in the air. I hope you like and support my work :D With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut/videos

I'm glad you like it. Yes the treasury is improvised haha, but I'm sure it's there too ;D. (I uploaded this post yesterday, but it didn't show up today, so I uploaded the same one again...)

What´s up Lego Pirate fans , here I present my latest MOC, the Shipwreck Cove from Pirates of the Caribbean 3. Why I built it: I am a big fan of the Pirates of the Caribbean movie series. I've seen all of them and every single part has something special about it. However, part 3 is my favorite movie because of the plot, many funny scenes and the strong cast of actors. An epic scene in this part is the meeting of the pirates in Shipwreck Cove. This well-protected place with countless ships in the middle and a rock wall around it is simply ingenious. And this scene is accompanied by music that gave me goosebumps. That was the motivation to recreate this scene as best I could in Lego. Lego Ideas: https://ideas.lego.com/projects/80031ffb-4309-43c8-9887-3fa7594db70f I hope you like and support my work. With kind regards MAP Tec Instagram: maptec.baut YouTube: https://www.youtube.com/@MAPTecbaut

What´s up Lego Pirate fans, here I present my latest MOC, the Shipwreck Cove from Pirates of the Caribbean 3. Why I built it: I am a big fan of the Pirates of the Caribbean movie series. I've seen all of them and every single part has something special about it. However, part 3 is my favorite movie because of the plot, many funny scenes and the strong cast of actors. An epic scene in this part is the meeting of the pirates in Shipwreck Cove. This well-protected place with countless ships in the middle and a rock wall around it is simply ingenious. And this scene is accompanied by music that gave me goosebumps. That was the motivation to recreate this scene as best I could in Lego. Lego Ideas: https://ideas.lego.com/projects/80031ffb-4309-43c8-9887-3fa7594db70f I hope you like and support my work ;D. With kind regards MAP Tec Instagram: maptec.baut

Lego Technic Height-Adjustable Rear Suspension for 1:8 Hypercar What´s up Lego Technic fans, Here I present a Lego Technic Height-Adjustable Front Suspension for a 1:8 Hypercar. The mechanism is quite simple, but very efficient. It's just a matter of changing the torque and so the suspensions remain stable in their position ;D Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-221380/MAP Tec/lego-technic-height-adjustable-rear-suspension-for-18-hypercar/ I hope you like and support my work ;D With kind regards MAP Tec Instagram: maptec.baut

I'm glad you like it. And thanks for the article. Of course many electronic devices now have a filter or night mode, etc, but if you've bought blue light filter glasses before, you now have a new place for them ^^

Haha, good idea. I'm glad you like it. Keep an eye out for my sunglasses video ^^

What's going on Lego fans, here I present a case for reading glasses. It has lots of details from almost all sides! Why I built it My parents now wear reading glasses and I asked them if they always know where they put them. So I thought I'd build a case out of Lego bricks that would be instantly recognizable as a reading glasses case. My model Size: Length: 10 cm, Wide: 20 cm, Height: 10 cm Parts: 421 pieces Front: You can see the sentence "For all bookworms". In Germany we would say "Leseratten" but I choose the Englisch version and therefore "bookworms" ;D. Top: Here we have an big open book with a blue divider. Side 1: You can see a open book with green edging. Side 2: Here we have a open book with blue edging. It can be folded open so that you can put the glasses inside. This case can be placed on a table or hung on the wall, for example. In the picture you can see my case unfolded so that you can imagine the function and see what it looks like inside. Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-221995/MAP Tec/lego-reading-case/ I hope you like and support it :D With kind regards MAP Tec Instagram: maptec.baut

What´s up Lego fans, here I present the case for the Blue Light Filtering Glasses. The case has details from almost all sides. Why I built it? Health is a high priority for me and in today's world we are exposed to a lot of radiation from electronic devices. In the evening in particular, it is advisable to protect your eyes with blue light filter glasses to help you sleep better and faster. I bought a pair of these glasses and needed a matching case. Here I present it now ;D. My model Size: Length: 10 cm, Wide: 20 cm, Height: 10 cm Parts: 467 pieces The Front: Various Lego bricks are used here to represent the blue light filter glasses, using blue tiles (blue), a light bulb (light), a grid (filter) and glasses (glasses). The Top: A television is shown emitting blue light, which is then filtered to produce “healthy” light for the evening hours. Sides: Black borders are intended to indicate a screen. Open the glasses case and you can put your blue light filtering glasses inside :D. I have attached two Lego pieces to the back of the case so that you can even hang the case on a wall like a picture. Of course, further details are always possible... Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-221997/MAP Tec/lego-blue-light-filtering-glasses-case/ I hope you like and support my idea :D Criticism is always welcome! With kind regards ^^ MAP Tec Instagram: maptec.baut

What´s up Lego fans, here I present my sun glasses case for my sunglasses. It has lots of details on all sides and can be placed on a table or something else or even hung on the wall. Why I built it Last summer I bought a pair of sunglasses and got a matching case to go with them. After a while, I started thinking about where I could put or place my sunglasses. It would be interesting to know where people put their sunglasses or glasses in general and what the cases for the glasses look like. This led me to the idea of creating cases out of Lego with different designs :D. Here you can see the design for my sun glasses case. My model Size: Length: 10 cm, Wide: 20 cm, Height: 10 cm Parts: 482 pieces The Front: You can see the sea with waves and a little shark fin and the beach with a few sun loungers and a orange SUP. The Top: The top represents the sea again with waves and a bigger shark fin and the beach with lots of details. There are again some sun loungers, parasols (one open and one closed), two palm trees, the path to the water like in real life, a red SUP and a little sandcastle. Side 1: Two different colored fish are swimming, and there is sand and some algae on the seabed. Side 2: Here we have half a watermelon and a nice cocktail with a slice of lemon ;) Open the glasses case and you can put your sunglasses inside :D. I have attached two Lego pieces to the back of the case so that you can even hang the case on a wall like a picture. Of course, further details are always possible... Instructions are available at rebrickable.com: https://rebrickable.com/mocs/MOC-221999/MAP Tec/lego-sun-glasses-case/ I hope you like and support it :D MAP Tec Instagram: maptec.baut

Sooooooooooooooo good. Impressive ;D