Jump to content

Jack06

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    17

  • Joined

  • Last visited

 Content Type 

Everything posted by Jack06

  1. Jack06
    Sorry. I had seen this mod of the spaceprobe posted in the same Forum, so I thought it would be the right subcategory for stuff like that. Greetings Jakob
  2. Jack06
    Thank you for the kind words! Thanks.
  3. Jack06
    Hello together, after the ulysses space probe was released, i wanted to build my own version. Forr me personallyl, the ulysseus spacecraft lacked details, a lot of things were simply left out. The MOC was only made using Bricklink Stud.io, free instructions can be found here: https://rebrickable.com/mocs/MOC-74025/JBs Brick Creations/ulysses-space-probe-more-detailed/#details So here is my version of the famous space probe, I hope you enjoy it. Greetings Jakob
  4. Jack06
    Hello everyone, I have just built the wheel loader 1: 1 according to the instructions to get the result that customers who buy the instructions would also get. I didn't had all parts in the correct colours, but no matter There were a few small mistakes in the instruction, which I will correct today. And I also didn't built in the tan 20 tooth gear in the front, you guys were right, it works better without it. Many people here thought that the model more likely fulfilled the function of a display model, but I basically built the wheel loader with the wish that all the (technic) functions would work. And they do that from my point of you. Especially the steering and the driving works well in my opinion. I recorded a very short, uncut video , I would be happy if you could take a look at it. And yes, the lifting capacity is not particularly large, but 100 grams is enough for me. I could also replace the dark-gray linkage with two 7L liftarm, would be more stable. ok Best regards Jakob
  5. Jack06
    First I apologize for my quite bad english, I'm 14 years old my school-vocabulary is not very big. Should be done. That's right. I paid more attention to the appearance, the lifting capacity is about 100 grams. That's ok for me. It constructed this mechanism in a way, that it is able to lift 100 grams without breaking. I would never glue Lego parts to get a better functionality! Half-half. You can use the font axle drive, it works, but it`s possible that the model will drive a little bit jerky. Thank you for the reminder , I added this to the MOC description on Rebrickable right now. Thank you. Best regards Jakob
  6. Jack06
    [MOC] Liebherr L506 compact wheel loader Hello everybody, after a while I'm happy to present my latest MOC to you. It's a replica of the Liebherr L506 compact wheel loader, and it's controlled via a Vengit SBrick, as always. Some Infos about the model: 999 parts Width: 17,5 cm Height: 18,7 cm Length: 38,4 cm 4 functions Instruction is available on Rebrickable since today: https://rebrickable.com/mocs/MOC-59847/JB Lego Creations/liebherr-l506-compact-wheel-loader/#details Some pictures/Render, hope you like it: The video: Best regards and merry Christmas Jakob
  7. Jack06
    Dear community, today I want to present you my newest MOC, a replica of a E-Forklift from the Company Jungheinrich. The model is fully remote controlled and has got 4 functions, controlled via a Vengit Sbrick. Data about the model: - Height: 25 Studs (20 cm) | [ extended lift mast] : 38 Studs (30.5 cm) - Length: 29 Studs (23 cm) - Width: 10 Studs (8cm) - Weight: 835 g - total parts (without Rubber band, cords and Sbrick) : 689 Electric components: - 2x Power function L Motor - 1x Power funcion M Motor - 1x Power function servo Motor - 1x Vengit Sbrick Now some pictures, I hope you like it: Battery Box: Rubber Band: Technic in the inside: Building Instruction, made with Bricklink Studio and Gimp: https://www.1000steine.de/de/gemeinschaft/forum/?entry=1&id=441294#id441294 I hope you like my Model. Greetings, Jakob, 14 years old.
  8. Jack06
    Thank you very much!
  9. Jack06
    Hi everyone, after 3 months of planing and contruction, I 'm happy to present you my newest MOC. It's a Pistenbully 600 LEVEL RED from the german company Kässbohrer. It has got 8 functions, controlled via 2 Sbricks. You can see all functions in the Video: https://youtu.be/p4F_J6-3MPs Pictures: 20200430_105802 - Kopiert by J. Breinl, auf Flickr 20200428_104746 by J. Breinl, auf Flickr 20200429_112941 by J. Breinl, auf Flickr 20200430_105544 - Kopiert by J. Breinl, auf Flickr 20200430_105621 by J. Breinl, auf Flickr Anmerkung 2020-04-29 134018 by J. Breinl, auf Flickr dsd by J. Breinl, auf Flickr Hope you like it. If you have any question, ask. Greetings, Jakob (14 years old)
  10. Jack06
    Hey guys, I habe made an instruction with studio: https://rebrickable.com/mocs/MOC-36390/ProfessorBaustein/pistenbully-600w/#info
  11. Jack06
    The insruction is avaible at Rebrickable now: https://rebrickable.com/mocs/MOC-31588/ProfessorBaustein/rc-liebherr-r-918-litronic-excavator/#parts
  12. Jack06
    I'm glad that you like it. In the LDD, there aren't a lot of buckets I will look in Stud.io, I think there are more.
  13. Jack06
    Hello together, here is my newest Moc. It is an excavator of the company Liebherr. It's controlled by two Sbricks. Now some Pictures, i hope they work: I also build it in real, here is a short movie: https://youtu.be/Mt4kWwQOS_0
  14. Jack06
    So, I finish it :https://youtu.be/v8bLOLGuDow
  15. Jack06
    Today is my birthday, and i got 2 sbricks from my parents, and they need not as much place as the IR Empfänger. https://youtu.be/UaI7iFtteiA
  16. Jack06
    I hope my English is ok. The Video is a little bit old, meanwhile I habe a new drive: https://youtu.be/KRqhP5R7i2Q PS:,I hope that the link works.
  17. Jack06
    Hello everyone! In this thread I would like to introduce you to my lego technic pistebully. I tried to build as detailed a model as possible, and now, after 6 months, I'm done. The remote-controlled features are: Driving lift/lower snowplate tilt snowplate turning snowplate Alpineflexfräße lower/lift alpineflexfräße activate I hope the pictures are ok : Her is the Link to the Video that i was made:
  18. Jack06
    Hello everyone! This is just a first try to say hello and get used to all the items and tools...
×
×
  • Create New...