Rustinidiel

Hi, I have a question: I love your work and it has been a great help to me in my journey with LDD. But now I am "converted" to Stud.io, and its biggest flaw for me is the limitation of the components. Is there a way to get the entire library of updated pieces and those of a clean installation of LDD? obviously without having to install LDD (if I find my old .exe of the LDD 4.3.11 installation, I put it, extract all the .lxfml and add them to your collection) so when I need a piece that Stud.io does not have, I just import the corresponding .lxfml and continue designing..

Updated version, with some improvements and a little cute Star Destroyer: Drath Star II diorama by Rusty B., su Flickr Drath Star II diorama by Rusty B., su Flickr

hi, and thanks for the appreciation! i'm glad you like my total modification of the original ispiration model, i've changed all the inside and redesigned the outside shape with more details, and my "strudy" comcept of work

i've sent a DM to you

I think I have found a simple and effective solution: Awakening by Rusty B., su Flickr

thanks for the suggestions... i'm trying to recreate the classic scene where a zombie wakes up from his tomb and a hand, or hand and arm, goes out from the ground... but the torso tilts the arm angle and it not fits to any "ground hole"

Hi everyone! my doubt is about "hand" "arm" and "leg" parts: there is a way to connect the pin of the hand not on the arm hole? there is a way to connect the arm (the shoulder bubble or the hole inside the shoulder) not on the torso hole? there is a way to connect the single leg (i mean the hole for the hips) not to the hips? legal/illegal techniques suggestion are appreciated

I've updated the models, fixed the "neck system" (was a bit tricky and someone disliked it), and replaced the pics with the new ones. now, whith this new "neck system" you can use all the helmet you prefer, without collision problems

Thanks a lot for your appreciation!! the inspiration comes from a ship of a videogame (Everspace), but i wanted to make it with a StarWars-taste... for that, I figured it was the Corellian Engineering Corporation who built it, using the YT-series cockpit and the wings/mandibles design proper of the corellian designs

here is my entry to the Imperial Ship Contest:

This is my entry for the M4-23 Contest: the Eta-5 Hybrid "WarHawk" Starfighter: During the Great Jedi Purge, the Empire developed some new ship designs and upgraded some old ones, as the Darth Vader's Eta-2 Actis Intrceptor, or the Alpha-3 Nimbus-class starfighter, before reaching the "perfection" with the Tie-series. One of thoose prototype was the Eta-5 Hybrid Starfighter, codename "WarHakw", manufactured by the Corellian Engineering Corporation. This long range starfighter is basically an high-powered Hyperspace engine with a cockpit and a wing-sytem inspired by the previous Eta-2 class. The result was this hybrid ship, with a good agility in battle and the advantage of being self-contained and therefore perfect for solitary Jedi hunt. Provided with an astromech housing and a cargo-bay, the WarHawk allows to be a multi-purpose ship. I hope you like my work, all comments, suggestion and criticism are appreciated. Wish everyone good luck! P.S.: this entry is a digital one, but the ship is fully buildable and tested in real life. and sorry for my bad english (if someone has suggestion to improve my description for a better comprehension, don't hesitate to tell me)

thanks a lot for you appreciation! all feedbacks mean a lot for me

i rally appreciate all the feedbacks, because i prefer to give perfect instructions (and with 3d software something can be done in wrong) so, in absolute peace, if you can show me the problem (an your fix if you want) i really thank you because with your help i can fix my instructions for all who own them

sadly the Studio software has some weird collision... sorry for the mistakes, but if you had written to me (here, or on flickr, or on rebrickable)... i would have worked to resolve the problem, updating the instructions (the same i've done with the Royal version, thanks to @Hold0511 for his feedbacks)... anyway, tell me what parts dont fit together, what steps are incottect... and i'll make my best to fix them all

because it is a different ship... not a "N1", but a "NX", a similar ship used as "police patrol" and as "training ship" for the future N1-pilots... that bulbous section is an engine, in the other pics on my flickr you can see a rear view of the ship

hi all, this is another Naboo ship. The NX Police Cruiser, an atmospheric starship that looks similar to the N1-Starfighter. it appears in the N64 game "Star Wars Episode I: Battle For Naboo" My initial inspiration/approach was from the awesome work of Inthert (https://www.flickr.com/photos/143232344@N06/), and I've mantained a couple of details of the original model. I've recreated all the internal structure and the external shape to obtain my personal model, keeping in mind to build a sturdy set that can be displayed (the instructions contain a simple and effective stand solution) but also can be played. The final model can fit inside a minifigure with the helmet (minifigure is not included into the part lists, you can choose your favourite one by catalog). more pics (i'll add some others) on my Flickr: https://www.flickr.com/photos/152734688@N06/albums/72177720297542837/ and instructions avaiable on Rebrickable: https://rebrickable.com/mocs/MOC-106033/Rustinidiel/nx-police-cruiser/#details i hope you like it (i really like any suggestions and criticisms)

hi, thanks for your question (i'm not a "super designer" but if you asked that, maybe yu appreciate my work... and this means a lot for me) anyway, depending on a lot of things (for my designing process, not all got the same approach): if in the early designing phase i know to want a particular detail, i place it in the position, and than i create che others things (interior and exterior) around it... if i know a part of the model is hard to be build, i start with the internal structure (for be sure to obtain solid anchorage points)... if i need a particular shape, i make a lot of building tests to reach the final shape structure, than i use those techniques to design the ship... so, finished the protoype model, i deassemble all for optimize the build, checking the errors (sometimes some things done in a 3d software can't be done in real life), and i repeat this phase many time... changing little things, or redesigning the entire model... by the way, i use different approach for any model (because any creation is a new challenge for me), creating a spaceship, or a house, a diorama or a car... the real suggest i can give to you is the knowledge of existing parts and existing colors... like the kid who knows his lego bricks inside the "toy container"... is a good start point for your creativity to say "hey, that thing can be done with that part? maybe yes, let's try"... and the most important thing: HAVE FUN hope that was helpful thanks a lot, that is a beautiful surprise

i really appreciate you decided tu purchase my instructions! if you will find some errors (i think to have checked all right), don't hesitate to contact me. please, when built, post some pics if you can... Thanks a lot for your support!

Thanks a lot, i'm working on another things to integrate in this project thanks for your appreciation! i'm really glad you like them! and for all, if you want build them subtaining my work, on rebrickable there are the instructions to purchase (links on first post)

hi all, finally i've finished my two versions of the N1-Starfighter, the Royal one and the Mando's modified. My initial inspiration/approach was from the awesome work of Inthert (https://www.flickr.com/photos/143232344@N06/), and I've mantained a couple of details of the original model. I've recreated all the internal structure and the external shape to obtain my personal model, keeping in mind to build a sturdy set that can be displayed (the instructions contain a simple and effective stand solution) but also can be played. The final model can fit inside a minifigure (with the helmet) and the modified version can fit the Grogu minifigure too (Studio doesn't have the Grogu head, so i've recreated in a tricky style ). A big thanks to Universe Sandbox (http://universesandbox.com/), the "sky background" of my image is created with that awesome software! more pics (i'll add some others) on my Flickr: Royal (https://www.flickr.com/photos/152734688@N06/albums/72177720297347013/) Modified (https://www.flickr.com/photos/152734688@N06/albums/72177720297148686/) and instructions avaiable on Rebrickable: Royal (https://rebrickable.com/mocs/MOC-105197/Rustinidiel/n1-starfighter/#details) Modified (https://rebrickable.com/mocs/MOC-104193/Rustinidiel/din-djarins-n1-starfighter-modified/#details) i hope you like them (i really like any suggestions and criticisms)

thanks to @Hold0511 and @azanderk for your comments! i'm really glad you like my work. Soon i'll post the "original" version of the N1 Naboo Starfighter based on that design

thanks for your appreciation! i haven't built it in real life for now, but the structure is solid and stable. maybe a couple of little detail on surface are weak, but it is playable

hi all, i've worked a lot on this because i love this ship and tried to make my best on it more pics (i'll add some others) on my Flickr: https://www.flickr.com/photos/152734688@N06/albums/72177720297148686/ and instructions avaiable on Rebrickable: https://rebrickable.com/mocs/MOC-104193/Rustinidiel/din-djarins-n1-starfighter-modified/#details i hope you like it (i really like any suggestions and criticisms) P.S.: we need Grogu head in Studio, i've tried to "recreate" it in a funny way

is right that the problem... if i want sell my model, using one background imagefor the "model preview"... that is a "commercial use"

this is amazing! what pc needed to make this?