Search the Community
Showing results for tags 'Asylum'.
Found 12 results
-
Hi Guys! I'm Bricksfeeder. I want to share with you my big project I began at the beginning of 2019 : The Arkham Asylum! I will explain you more in detail the concept, my whole project and the WIP on this MOC in video (Youtube, Instagram) and Post. Let me know if you have some preference for this content or if you would like to get building instructions of this project or parts of this project. If you have advice to improve my MOCs or the content of my YouTube Channel, tell me in comment! :) I hope you enjoy this project. Don't forget to follow, like and subscribe! :) It’s not a big update but all the vehicles are done except the train. For the Extra features, I make few things which is already available : - Mr. Freeze Armor - 70's Ambulance - My own Batmobile (https://rebrickable.com/mocs/MOC-26146/BricksFeeder/brickfeeders-batmobile/#comments) - Asylum Stretcher (https://rebrickable.com/mocs/MOC-24834/BricksFeeder/asylum-stretcher/#comments) - Batdrone (https://rebrickable.com/mocs/MOC-24835/BricksFeeder/batdrone/#comments) - Joker's Lowrider (https://rebrickable.com/mocs/MOC-24837/BricksFeeder/jokers-lowrider-7studs-wide-car/#comments) - GCPD Car (https://rebrickable.com/mocs/MOC-24861/BricksFeeder/gcpd-car-police-car-7studs-wide-car/#comments) - Arkham Armored Truck (https://rebrickable.com/mocs/MOC-24850/BricksFeeder/armored-truck/#comments) - Nightmare Scarecrow (https://rebrickable.com/mocs/MOC-30910/BricksFeeder/nightmare-scarecrow-inspired-by-the-arkham-asylum-game/#comments) For the moment, I didn't make a lot of progress on the Arkham Asylum (I was busy) but I have new few ideas... Stay tuned! ;)
-
Hi Guys, Today, I show you a MOC I made yesterday. I didn't want to work on my bigger MOCs in progress so I tried to make a new armor / Mech suit for Mr. Freeze for my big project of next year (2019)... I let you watch the showcase video. Inspirations : The Jawbreaker by Golplayswithlego (https://www.flickr.com/photos/137434519@N08/) Free PDF Instructions and Part list available on Rebrickable : https://rebrickable.com/mocs/MOC-19428/BricksFeeder/mr-freeze-armor-mech-suit/#comments Let me know in comment what you think about! See you soon!
-
I show you my MOC of the Batwing from the Arkham Asylum Video game. This MOC has 429 pieces. Let me know what you think about this MOC! :) Tell me which one would you like to see next time or tell me what you want me to build! Special Thanks to Lucas / The Incinerator14 (https://www.flickr.com/photos/theincinerators) for the advice and his kindness! I credit Giulio Manuelli too (http://www.moc-pages.com/home.php/102785). He made an Arkham Asylum Batwing too but 4 years before mine. Although similar, I didn't copy his design. It's just a big coincidence but by respect, I credit him! :) The Display is highly inspired by the MOC of Outer Rim Emperor. Arkham Asylum Batwing instructions (PDF) 5 euros on my website : https://bricksfeeder.wixsite.com/bricksfeeder/dc-comics Display Instructions (free LDD File) : https://bricksfeeder.wixsite.com/bricksfeeder/dc-comics Parts list on Rebrickable : Display : https://rebrickable.com/mocs/MOC-1253... Batwing : https://rebrickable.com/mocs/MOC-12542/BricksFeeder/arkham-asylum-batwing If you have a problem to purchase my building instructions on my website, Don't hesitate to send me an e-mail or to contact me by Facebook! Keep on building ! You can see my other topics about my MOCs: TIE Fighter (SW Rebels Design) ITT TIE Advanced Prototype A-Wing (McQuarrie / SW Rebels Design) Batman's Batmech Speeder Bike 614-AVA Peugeot Spinner From Blade Runner 2049 Rebirth Batmobile TAS Batmobile
-
Here is my MOC based off the video game Arkham Asylum In this scene, Batman enters Killer Croc's lair only to be blocked by the Scarecrow who threatens to unleash his fear toxin. Before he can make good on his threat, Croc emerges from beneath grabs the fiend and disappears through the murky waters A look at the guard tower- Croc sneaking up on the Scarecrow- A look at my purist Scarecrow- What do you think? Should I do any more MOCs based on Asylum or it's sequels?
-
This model was inspired by set 70912, (Arkham Asylum) from the LEGO Batman Movie theme. Whereas that set is only the front facade of the building, this model features two opening rear quarter sections to reveal the interior details. The front of the building features a statue of the same design as set 70914, (Dol Gulder Battle) from the Hobbit theme. You can find that statue here as the printing on the figure is not in LDD. Also on the front of the building is space for 16 printed letter tiles (eight per row) to spell out the name of the mansion. The rear of the mansion features rows of windows and a stone fireplace flue on the left side. The model consists of three sections: the front half, the left quarter and the right quarter. Each section is connected to the next via two hinges, or in the case of the quarter sections in reference to each other, via a small Technic pin with stud. This pin locks the building shut but allows for it to easily open up again. The front half of the building features a drawing room on the left side of the picture, a living room on the opposite side, and the bedroom on the upper floor, which also has access to the balcony above the main entrance. The spaces below the stairs are currently unused, but I thought about putting a small kitchen down there, or possibly a small vault for extra money / family heirlooms. The left quarter features the fireplace mantle and flue, plus one half of the dining room on the ground floor. The right quarter has the other half of the ground floor dining room, a couch in the living room and a wardrobe in the bedroom. This model is completely build-able in real life in it's current form. However, I don't think i'll be building this one anytime soon in real life (too expensive right now!) but I thought instead wasting the design to languish forever on my computer, I though I'd give away the LDD file for free at this link here.
-
Hey guys , after waiting two months to get all the parts , everything I need for my Classic Arkham Batmobile has arrived . In my mind I’m still calling this a WIP , as there still remain some changes to be made , but they are really small and subtle , so I decided to post it as it is ( and maybe post a V1.1 later ) . As I’m sure you can imagine , one of these changes is changing the colour of the two “road signs” on the roof of the car to black . Unfortunately , these parts don’t come in black , so I’ll paint them ( I don’t love the idea anymore than you do , but I think the parts fit in perfectly and they look inaccurate being grey and brown ). I am also playing with the idea of adding stickers to give the model that extra bit of accuracy , specifically on the "6005" parts in front of the rear wheels . Finally , what’s a Batmobile without Batman ? I knew , from the moment I started building this that I had to get a custom Arkham series Batman minifig to go along with it . And when I tumbled upon onlinesailin’s Arkham City Batman, I was amazed by the astonishing level of detail, the amazing resemblance to the iconic suit, everything . Thanks “onlinesailin”, for the best minifigure out there , this moc wouldn't be the same without it . Now, I’m sure you came here to see a Batmobile, not read boring details, so here are some pictures . Now let me get that explosive gel ... I really hope you liked my build , please comment your opinion and/or constructive criticism . Thanks for viewing :)
-
Hey guys , My first MOC when I came out of my late dark ages one and a half year ago was the Batmobile from the first two Arkham games ( well , technically it also cameos in "Origins" ) . It was ok for a first creation after years of absence I guess , but not that great . Some days ago I stumbled upon the LDD file , and I thought " Why not revisit it , make it great and actually build it with real bricks as well this time ". I'm posting this as a WIP because I've finished 80-85% of it but I'm kind of stuck and I need some opinions and suggestions . Here is what I have so far : The tooth piece is supposed to go between the 1x1 plate and 1x1 tile right behind the "tubes" , LDD won't let me put it there but I think I'll be able to squeeze it in there when I actually build it . The tubes / hoses will be flexed so that they're closer to each other and have the angle like the "real" model . As you can see ,the front part is complete , but the back , specifically behind the driver's seat is only a rough draft . So here comes the part where I need your help . I've created two versions of the back "afterburner" area as well as I need your opinion on which looks more accurate , and as many ideas and suggestions as possible for the part behind the driver's seat . Here is the second version of the back area . And , since 2D screenshots can never truly express the 3 dimensions , I'm attaching the LXF file . The one on the right with Batman next to it is what I've been showing so far , the one in the middle has the second version of the back area and the one on the left is the one on the right without the roof , whatever you see there is "complete" ( but of course can be changed if needed). Note : I know some parts don't exist in the colours I use , but I don't like to be limited by the colours TLG produces their parts in , so I'll probably paint them . Also , you may find some "silly " bits in the LXF file , like three 1x1 plates on top of each other instead of an 1x1 brick etc , obviously this won't be the case for the final model , just didn't pay attention to this kind of things and concentrated only in replicating the vehicle's look . Thanks for viewing and please leave a comment of your opinions/ suggestions , it will help a lot .
-
Arkham Asylum: Relative Insanity Batman is trapped inside Arkham during Joker's latest breakout attempt, and is under siege by not only the crown prince of crime, but by Poison Ivy and her dangerous plants and Scarecrow with his fear inducing toxins. Based on the 2009 Game of the Year Batman: Arkham Asylum. While the theme of this creation is based on Arkham Asylum, the design takes cues from M.C. Escher's famed lithograph Relativity, and also features a 360 build that can be spun around to view all sides. Granted you have to spin it by hand--this thing weighs like 15 pounds. But anyways...while also being the largest creation I've made, it also features tons of cool details and features such as lights by Lifelites. There's a lot going on with this creation, so I guess I'll just start throwing out photos: Arkham From Minifigure Perspective Gates of Arkham Lite-up Batsignal Joker running free and Clayface's cell Sometimes you just need the right perspective. Sssshhh! Wait that's not right... Poison Ivy side and Mr. Freeze cell Poison Ivy Mr. Freeze, visible when lights are on only Killer Croc's cell enterance Fear induced dramatic flashback Joker running free; Bane cell with Bobo Osito Mr. Zsasz, visible when light is on only Arkham in the dark with lights on--notably a terrible picture. Scarecrow: A notable chunk of this creation is devoted to Scarecrow, who is here represented both by minifigure, and also by a large scale brick built figure (For his fear toxin induced appearance). At the Asylum Currently, this creation is on display at Brickworld Chicago 2014--so if you're there check it out! I'm happy with the final product, being both the culmination of weeks of building, and being my largest and arguably greatest superhero creation yet. I'm ready to challenge that last notion with more building, but in the meantime, enjoy! ~Tim Lydy Captain Nemo
-
The Warehouse section of the Sionis Steel Mill from the video game "Batman: Arkham Origins" This was my first time using lettering in Lego and i think it turned out great!
-
Hugo Strange: Wake up Mr. Wayne, we have much to discuss. Bruce Wayne. Strange! You won't get away with this! Hugo Strange: I already have. Bruce Wayne: Shut Arkham City down, its out of control. Hugo Strange: Shut it down? By the end of tonight i will be a hero, just like you BATMAN! I feel i should thank you, capturing Bruce Wayne is so much easier then Batman. And now that we have you Protocol Ten is ready to begin. It will be my legacy, a monument to your failure and if you try and stop me, i guarantee everyone will know you secret. TYGER Guard: Welcome to Arkham City, Wayne! Inmate: What are you going here, Wayne? Inmate: Did you kill your butler? Inmate: Your going to die in here, rich boy! Inmate: Your going to be my bitch Wayne! Inmate: Your mine! TYGER Guard: Back on the ground! What are you waiting for, Wayne? Line A, Move! Black Mask: No one arrests Black Mask. No one! TYGER Guard: Line A, prisoner! TYGER Guard: Wayne! You're in line A! Move it, rich boy! TYGER Guard: You two get out of the way! Wayne! Get your megablocks up here! Floyd Lawton: Bruce Wayne? you're on my list. Bang. Hahaha TYGER Guard: Move up, prisoner! Hugo Strange: Lower your weapons. Mr. Wayne will not be any trouble. Will you, Mr. Wayne? The cuffs can stay on. We don't need to make things too easy, do we? TYGER Guard: Close the doors. Prepare for insertion! Based off the opening from the video game "Batman: Arkham City" I really enjoyed this build but it was a pain to photograph. I also added some more Arkham City items in the Moc too, try and guess what they are. I would of liked to add a lot of prisoners but i only had one orange torso and the inmate one from the Arkham Asylum set, so that sorta takes away from it.
-
[Minifigures] Batman: Arkham Origins - Online Playable Charecters
Dayton posted a topic in Minifig Customisation Workshop
Here are the 8 playable characters from the Batman: Arkham Origins Online mode. I am okay with how this turned out. To start out I would like to talk about the cons with these figures. I am not to happy with my Joker side (Including the Joker) I would of have used the Joker goon face if Myer would let me use gift cards online! The Bane is meh and I think that covers the bad figures. A pro would defiantly have to be the drones! Oh dear I cannot tell you how much I hate those things in the game. My favourite would have to be the one on the left (Bane's one) and the Joker one is another meh. The Bane Merc to the left of him turned out pretty good as well (Its based off the last picture in the loading screen if you play on Banes side) I would have used the Darth Malgus head but I traded it. Batman is a figure from TLG and I modified the TLG Robin figure for this version of him. I think these actually turned out okay. I will defiantly do some more Arkham Game stuff in the future! -
Party At Arkham An Arkham Asylum Inspired Build ---- Following a long series of events that could fill up an entire game, Batman faces off against a Titan powered Joker to save Gordon from certain death! As this scene is based off the the location and boss battle against the Joker, the henchmen here too must like in the game, unlock a safe to get firearms. Titan Joker The centerpiece of the build, I build Titan Joker with an emphasis on accuracy and pose-ability. I was going to could, but I’ll just say he has tons of articulation points, allowing large movement in the arms specifically. I did at one point intend to increase the articulation in the hips to allow horizontal leg movement, but I was forced to drop this when it compromised stability too much. Joker’s head was a particular problem that I managed to solve quite nicely. Originally I started with something similar to a cube-dude head. This didn’t work because of the requirements such as the lips and nose. Then, after looking at some more photos, I focused on building a head that was more elongated and pointed, like the Joker in the game. This proved very successful, allowing me to create an accurate head from brow to chin. Enjoy! ~Nemo
