MadHorax Posted May 14, 2025 Posted May 14, 2025 (edited) Hello everyone! I am newbie in Eurobricks, experienced MOCer and happy to be here! I think it's time to show you one my MOCs. The MOC ideea starts from building a compact RC F1 car, with a scale less than 1:10. Said and done! :-) It is an unbranded F1 car, it is built using 2 x. L PU motors and a city Hub written with custom software (it can be restored to initial status). Front wheel wings turn synchronously with the wheels. :-) Edited May 15, 2025 by MadHorax Removed attached images. Quote
2GodBDGlory Posted May 14, 2025 Posted May 14, 2025 Welcome to Eurobricks! Your images don't seem to be working for me. Are they uploaded to another website and embedded here? That's usually how images need to be uploaded here Quote
Milan Posted May 14, 2025 Posted May 14, 2025 @MadHorax Welcome to EB. Make sure to take a look at the rules of the site, there are also instructions on how to post images. In short, you cannot upload them to Eurobricks directly. You need to use an external site (Flickr, Bricksafe etc...), upload them there, and just paste a link here, and the images will be shown. Mind the max allowed size, too. Quote
MadHorax Posted May 15, 2025 Author Posted May 15, 2025 (edited) Thank you, for your welcome messages! My bad I did not read carefully the rules! Hope now it is ok... :-)  Edited May 15, 2025 by MadHorax Quote
TexasEngineer454 Posted May 15, 2025 Posted May 15, 2025 Any other images of the steering geometry? Looks like an interesting build! Great work! Quote
MadHorax Posted May 15, 2025 Author Posted May 15, 2025 (edited) Thank you for your appreciations. Here the steering geometry. The model instructions are on RB. Edited May 15, 2025 by MadHorax Quote
N1K0L4 Posted May 16, 2025 Posted May 16, 2025 Welcome to Eurobricks! Looks great! You based it off the current gen F1 cars, right? Also can you show us a bit under the body, I'm curious how you put all the motors inside. Quote
MadHorax Posted May 16, 2025 Author Posted May 16, 2025 (edited) Thanks for the welcome! Regarding the body, it is a little difficult to show you, because the bottom is filled with parts and the motors are partially or not visible, but the electrics are placed as drive motor, hub, steering motor, long axle aligned, with no spaces between them. Edited May 16, 2025 by MadHorax Quote
N1K0L4 Posted May 16, 2025 Posted May 16, 2025 You could do another render of only motors and driveteain. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.