Search the Community
Showing results for tags 'maze'.
Found 11 results
-
Inspired by @touthomme's increased tilt modification, I created a multi-level maze that uses various ridged and rigid hoses for ramps. I'd love to see a little revival of the custom mazes taking advantage of the extra tilt. Full video | Inventory and instructions | Maze base mod with extra tilt
-
I would like to share with you my latest achievement, a maze solver. The maze is 4m² and has 100 boxes of 18cm x 18 cm. The robot has 4 ultrasonic detectors to analyse each case and mecanum wheels driven by 4 vertical engines. The whole is controlled by an EV3 brick hidden inside. You can follow the robot’s path on a second EV3 brick by bluetooth as well as its analysis which may lead to prohibit certain boxes. The robot measures 15cm x 15 cm and it is therefore difficult to move accurately in the labyrinth without hitting the walls. That was one of the difficulties, but I wanted it to be aesthetic and therefore with a body. When the robot arrives in a cell, it analyzes the 4 faces. If it sees 3 walls it blacklists the cell. If there are 2 walls and a forbidden cell next to it, it also blacklists the cell. At each cell it updates an array data of 100 datas, 1 per cell. In this array we will find all the informations about the path of the robot. In case of iddentic choice the robot randomly chooses its direction.
-
Maze: Escape From Jakku by Okay Yaramanoglu, on Flickr BB-8 has been given part of a map that leads to Luke Skywalker and it is now up to him to deliver it to the Resistance! Play as BB-8 as you roll through the deserts of the junkyard planet Jakku and escape the clutches of the First Order. But watch out for patches of quicksand or you'll drown! You start at Tuanul village which is under attack by the First Order. Navigate through the Graveyard of Giants past a crashed Star Destroyer. Meet up with Rey at her AT-AT home, travel past a crashed X-Wing and some other wreckage, and enter Niima Outpost where you meet Finn and escape in the garbage Millennium Falcon! The LDD file can be downloaded here: Jakku maze.lxf UPDATE: It has been pointed out to me that the maze ball needs a space of 5 plates high to fit through instead of the 4-plates high space that I used, so here is a modified version of the maze to accommodate that. I lifted up the AT-AT, Millennium Falcon, outpost entrance, and outpost building by one plate each. Here is the updated LXF: Jakku maze fix1.lxf Please leave your thoughts below and may the force be with you!
-
This maze is designed not for precise handling but as a brain teaser. Successful path (order of tilts) has to be found by try-error approach. Path is designed with "full tilt and no timing" in mind. So you can always go to full tilt (no hole directly at end of corridor) but which side you choose to tilt is what matter. There is one, little dangerous, shortcut. Critical tiles at border of holes are red. Board have two levels, which enable use of real holes. Bottom level (grey one) only collect dropped balls, top one is black box with start and finish places. By replacing some black tiles on top with transparent one, or reverse, you can make puzzle more or less challenging. Parts used in my digital work are (after 3 redesigns) all available on Bricklink, so maze can be build in real. LXF file is attached.
-
Please help Benny to destroy the mega robot that wants to conquer the world.
-
This is my entry for an A-Maze-ing contest. I have chosen Category A. The goal of my maze here is to start at the first rope bridge, into the jungle, and find the golden idol. Enjoy! Here's a video of me playing through the maze:
-
Hi everyone! This is my entry to the Category A category of the A-Maze-ing contest, a fairground! The fairground comes complete with everything one would have - rides, vendors, even a big circus tent. You start your journey through the maze by the red and white tent, rolling past the race car ride. Past that are two drop towers, one red, and one blue. (Pardon the really bad arrows ) Then, you make your way past trees and into the vendor area. There is a variety of food stands such as an ice cream stand, a pie stand, and a hot dog stand! (Which would be a bun but LDD doesn't have that piece yet!) After that, you go past the Tilt-a-Swing ride, do a couple turns, and curve past the big circus tent in the center. The build is intended to be the same as the water tower in 10246 Detective's Office. Then, you roll under the roller-coaster, past the ferris wheel, over a hill, and reach the end of the race by the blue and white tent! The journey is complete! That's my entry! I might improve the map a bit by integrating some of the rides (such as the ferris wheel) into the maze, but until then this is it! Thank you for looking at my entry, and I hope you enjoy it!
-
Eve's ship is leaving Help WALL•E (who is in the form of sphere) get to from his truck (the green tile) And through all the destroyed city and trash to get to Eve's ship (red tile) If it wasnt obvious enough its based off the movie WALL•E. Heres an above head shot for a better view. (couldn't figure out how to get this angle in blue render) And heres the LXF file http://bricksafe.com...Wall-e maze.lxf
-
Here's my entry for Bob's fantastic maze competition - another theme park entry, this time based on the 1993 blockbuster classic Jurassic Park. Start at the dark green tile by the InGen helicopter and roll through the iconic gates. Pass the Galliminus grazing area and visit the beautiful Visitor Center. Watch out, the T-Rex has escaped! Don't hide in the outhouse... Continue on past the Raptor Enclosure and discover the empty jeep that Nedry once drove on his way out. Finally, pass the Stegosaurus, reach the generator bunker, and restore power to the park! Here's the obligatory shot with the standard maze frame: The tiles near the helicopter and Nedry's jeep are actually trans-blue, but they showed up weird on the render. Likewise the flames are trans-orange. All parts exist, including the red dinosaur: http://alpha.bricklink.com/pages/clone/catalogitem.page?S=4079-1#T=S&O={} C&C welcome!
-
Hello Everyone! This is my entry for an a-Maze-ing contest Category A. This is a speedway themed game board. That building is a garage and that thing with slope are mean a spectator seat. This is the pic from more upside to see full of the road and a line from start to finish: This is the picture with my Cat B entry: (All pictures are clickable) LXF File | Enjoy!
-
Hello Everyone! This is my entry for an a-Maze-ing contest. This is a racing themed tilt system with technic element for the tilt system. But for the place of the game board still use bricks. Added functionality: - Return to center (rubber band aren't flexible, placed on the side of each wheels). Note: in LDD the rubber band aren't flexible, but i've tested in real life - Built-in-tray. (Inspired by Bob De Quatre). This is the built-in-tray with 4274 to avoid slide off: That round plate mean a tire and wheel. This is a 3M axle with stop for easy replacement to change the game board base. (I don't know this was helpful or not): This is the picture with my Cat A entry: (All pictures are clickable) LXF File | Enjoy!
