Search the Community
Showing results for tags 'echo'.
Found 4 results
-
MOC-HUNTER + (ALT HEAD BUILD) My third release in the buildable figure series from The Bad Batch. The scale of the figure is the same as my other MOCs of Tech and Crosshair. Both the helmet and alternate head version are done in the same scale as the official buildable Harry Potter buildable figures by LEGO. Creating Hunter's signature mullet was a bit difficult but I'm happy with how it turned out. The helmet version features a similar build style to crosshair with a different layering style to capture his unique helmet style. Echo and Wrecker are in the works with the possibility of a surprise figure. Instructions are available on BrickWars.net or follow me on Instagram for more original creations. Specifications for Helmet version + Alt Head Build Pieces: 1,655 Weight: 41.3oz | 2.58lbs Width: 19 cm | 7.5 in Length: 20.5 cm | 8.1 in Height: 27.4 cm | 10.8 in Estimate Part Costs: $170 - $200 Alternate Head build using custom UV printed parts on genuine LEGO pieces. Group Image with Alt Head of Hunter Group Image with Helmet Version of Hunter Upgraded Gear System The upgraded internal gear system allows arms and legs to be posable. If you plan on posing the legs, it may be necessary to attach the feet to a plate as the weight of the backpack and knives can change the center of gravity. The Clone force 99 Shoulder pads can be removed for more additional range of motion. While the helmet version of Hunter does rotate almost 280 degrees, the alternative build of the head has minimal movement due to the thickness of the neck. Custom Printed Clone Force 99 Emblems for Shoulder Pads. Details of Hunter's Signature Bandana (giving off some Rambo vibes). Sample Instructions Professionally produced, high resolution, step-by-step instructions of Hunter from Star Wars The Bad Batch. Custom printed face, Clone Force 99 emblems and skull bandana are included with the alternate build of Hunter. Instructions available at BrickWars.net -
CROSSHAIR My second release in the buildable figure series from The Bad Batch. The scale of the figure is the same as my other moc of Tech. These are both done in the same scale as the official buildable Harry Potter buildable figures by LEGO. I'm really happy with how the sniper rifle and the helmet came out. I plan on creating the Clone Force 99 version of Crosshair as well. Hunter, Echo and Wrecker are also in the works. Specifications: Pieces: 1178 pieces Height: 11.8 inches / 29.8 cm Width: 7.5 inches 19 cm Length: 7.5 inches 19 cm
-
Not one to start small for a few weeks now I've been working on flushing out the Echo Base Hanger display I want to build for my UCS Millennium Falcon. I've been planning this since the set was announced but couldn't really start till I had the set in hand to base everything off. It will be in a glass coffee table I'll be building to display it. The planned layout is currently 47.5" by 41.75" but I may go to 47.5" x 47.5". I'm going to use Stricklybricks 50x50 baseplates with one set getting trimmed down. I'm trying to be as accurate as possible and get all the little details I'm finding as I research that I haven't seen before. This will also display some of the rest of my collection so the ships inside will be a mix besides the Falcon. My 99 X-Wing and probably one of Cehnot's beauties and 4 different official speeder sets spanning the years. I'm using Migui94's Falcon as a placeholder as I work to confirm sizing in addition to the physical test layout I have set up. I see that last week Cehnot also started basically the same project with similar goals but he is going for the whole hanger while I only have room for some of it with size limitation. Can't wait to see his take shape and maybe collaborate on a few elements. I'm building in Stud.io first since I don't have the money to start buying all the bricks and figure it out by physical trial and error. So to get started with where I am at here is an over view of the layout. I have a lot of detailing to do on the walls but I've been waiting till I had the structural strength and sizing dialed in first as I kept tweaking. I originally had 2 full bays but they wouldn't hold an X-Wing so I widened it and also ended up raising them to fit the vents. This top down view with the yellow fence shows the 41" width. and the potential space if I expand to 47". I'm going to curve the wall behind the Falcon some more but I'm not going to go all the way around to keep the sides of the Falcon visible through the sides of the table. This front view of the bay shows the vents in the top of the bays. My current thought was stickers to detail the vents but i will probably revisit them to look ate a brick based option but scale is a limit here. The Cat Walk for the X-Wings is an item that has been done but lacking in detail. I used Enderman eye plates for the side detailing. The current support beam X cross braces are temporary. After much thinking and tinkering I decided to design and print custom pieces to go there. The 3L bar on top will be cut in half to finish the top rail on the ends. I do like Cehnot's top rail better though and may try to rework mine based on his. Some small detail builds I have are the (quite silly) Treadwell 1016 droid briefly seen twice (somehow it gets on top of the Falcon with treads...). I also have a fuel tanker cart seen between the Falcon and the X-Wing. The floor light took days to get the scale right and try to be easily lit from below. The plan it to get vinyl stickers for the sides to cover the trans-clear plates then put an LED under them trough a hole in the baseplate. Not shown here is that the front 1x2 plate is clear while the 2 under the slope grills are trans med blue to get the right light out the back. I have lots more to do but finally felt I had enough to start sharing. Any suggestions on how to improve something are welcome! I will also be overhauling the Falcon itself to be more ESB accurate. Haven't yet decided on adding an interior since it will be in a closed display. -JF140/Cody -
https://www.hackster.io/contests/alexa-lego-voice-challenge Pretty great.