I have a question about the Lego control + hub 88012.
While designing a moc, I used 2 L motors coupled together for the driving. And 1 L motor for the steering. I connected steering to port A on the hub and the 2 drive motors on C and D. This worked fine with the code I had in the powered up app. Later I decided to change the ports the motors are connected to. Steering went from A to B and the drive motors went from C and D to D and A respectively. I also change the code appropriately so that the toggles were driving the right motor. However, when the steering motor calibrated, it was unable to rotate past the middle to the left, but was able to turn right still(could turn left back to the middle but not keep going). It seemed like the steering motor had less power when plugged into this different port(B). This issue was solved by reverting the change in which port the motors were plugged into. I did not notice any change in the 2 driving motors.
Does anyone know why changing the port a motor is plugged into would affect the power of the motor.
The set the hub and motors came from was 42160 in case it is related.
