zsoltom

Finally i could do a solo alt arquitens class from the new display venator, the 75441. In january i had to add in ahsoka's t6 to make a bigger, with interior (see it in the comparison render, or at my Rebrickable), but in the meantime i found the solution for the solo arquitens too. The engines are not perfect, but for a display model i'd say is acceptable. The model is 40 studs, so its 2 stud longer than the perfect size if you want to display next to the ucs venator Instructions: https://rebrickable.com/mocs/MOC-264759/zsoltom/republic-arquitens-class-light-cruiser-75441-alternative/#details

my newest solo alt from the set is here, a first order troop transporter. Fits in a 10+ sitting figs, has a prison or medbay, and its freely available on rebrickable: https://rebrickable.com/mocs/MOC-265579/zsoltom/ahsoka-tanos-first-order-troop-transporter-75362-alternative/#details

slowly, but surely im expanding my separatist-alt fleet, here's one from the games, a separatist mechanized assault flyer made of the new MTT instructions:https://rebrickable.com/mocs/MOC-264756/zsoltom/separatist-mechanized-assault-flyer-75435-alternative/#details

the 75292 had a fondor inside, and the new, smaller has one too :) there's a video of the model too: Check the instructions here: https://rebrickable.com/mocs/MOC-263648/zsoltom/mando-grogus-razor-fondor-haulcraft-75447-alternative/#details

thx, altbuilding is love, altbuilding is life :)

My 3rd Nu-class alt is done, this time from the v-19 and the u-wing, check the instructions here: https://rebrickable.com/mocs/MOC-260084/zsoltom/republic-nu-class-attack-shuttle-75402-75399-alternative/#details This is the first of the 3 with accurate-ish wings, and the top is removable for easier interior access. - fits in 1 pilot - 8-10 sitting figs can get inside - removable top to access interior - wings need some extra support - 2 brackets for flight mode, and 2 other brackets with 3 more pieces to support the weight when the ship is landed. Easy to swap them, but they are needed. - displaystand - can hold the ship with flight and landed wings too this will get a video review too soon on my youtube

Made a video about the model, check it on YT:

just uploaded a video on the model to youtube:

The newest addition to the gang is here after a longer pause: a single alt from the 75379 into a separatist C-9979 Landing Craft! - there are 2 microvehicles - an MTT and an AAT - both fits in, one at a time - 16,6 x 46,4 x 9,3 cm - posable turrets, opening front hatch for vehicle access, sturdy, swooshable, by mostly display i guess :) Instructions and more pictures: https://rebrickable.com/mocs/MOC-256878/zsoltom/separatist-c-9979-landing-craft-75379-alternative/

After a bigger Venator with interior i went for an Arquitens-class from the t6 and the new official midi venator. - interior! It wont fit even sitting figs under the hull, but for some, it might be enough for a playset-like model - you can access it by removing the frontal top hull - 2 guns are moveable - there are enough pieces in the leftover to add the studshooters, maybe that size would fit the model better, i like it this way. - the Venator's display stand can be used, very vague mods have been applied to it - wanted to add in a handler, but that would cause more harm, so no handler, but you can grab it by the middle engine, or from the bottom or the side where the big triangle pieces meet - it is a little bit (few studs) bigger than what would be perfect size to accompany the UCS Venator, but i think it would still look neat next to it :D - i built in a lot of pieces in the end, but thanks to the variety, a VERY WIDE spectrum of recolouring and redesigning/retexturing is available. I think some starfighter designs could also be put together if you strip some unnecesary pieces from the inside, but i wanted to go full Arquitens this time - as all my models, this was designed, built and tested irl

Turn the pretty meh - but still cheap! - Justifier set into an acclamator playset! Has openable front interior and one under the bridge section, fits in quite some figs, liftable by the tail/fin More pictures and instructions: https://rebrickable.com/mocs/MOC-254386/zsoltom/cad-banes-imperial-acclamator-the-taxclaimator-75323-alternative/#details

After a Nu-Class and a Gunship, here's my 3rd alt from the 75402 and the 75432 combined: a corellian cr transport with a clone outpost! More pics and instructions:https://rebrickable.com/mocs/MOC-254981/zsoltom/republic-cr-20-clone-outpost-75402-75432-alternative/#details the cr20 fits in a speederbike and 8 figs, the barricade has a mounted dual studshooter cannon, a comm terminal, a crate with weapon holsters, and an anti-air projectile shooter platform. Perfect playset combo :)

one of my fav lsw meme is turning everything into the falcon, the other is turning everything a gunship, here is answer for the question: will the 75416 Chopper gunship? only 2 windshield are needed, everything else is in the box, fits 2 pilots, and 4-6 figs in the back :) more pics and instructions: https://rebrickable.com/mocs/MOC-251835/zsoltom/choppers-pimp-my-laat-75416-alternative/#details

The new display venator is awesome, but a bit smalle, and its always nice to have an interior, right? :) Stand is kept, openable front, removable bridge, interiors under both, can be grabbed and swooshed by the end tail/fin segment between the engines More pictures and instructions: https://rebrickable.com/mocs/MOC-248016/zsoltom/republic-venator-class-75362-75441-alternative/#details

Here's my second Venator playset alt, has openable front and accessable back (bridge) interior, openable frontal hangar doors to display nano-builds, technics handler, and a tons of fun :) More pictures, info and instructions at Rebrickable: https://rebrickable.com/mocs/MOC-243355/zsoltom/coruscant-guard-venator-playset-75362-75354-alternative/#details

I just wanted to make an AAT alt of the set, but ended up so much leftover, i could turn it into a battle pack STAP, AT-RT, speederbike, Droid platoon carrier and an AAT, more info and instructions: https://rebrickable.com/mocs/MOC-242691/zsoltom/battle-of-felucia-part-2-75435-alternative-free-after-1000-followers/#comments (it will be a freebie, as soon as i hit 1000 followers at rebrickable :)

My 5th dropship alt is done, this time i used the arc 170, and for the proper colors, the most recent u-wing! More pictures and instructions: https://rebrickable.com/mocs/MOC-242412/zsoltom/republic-dropship-75399-75402-alternative/#details - comfy cockpit for 1 pilot - can lift and be displayed on an AT-Te, or anything that's roughly that size and has the same sized technic handler - can be displayed on it's own too - 4 projectile shooters, since i had them - very posable front guns

My T6 and AT-TE joined forces again (after my Venator) this time i went for the Old Republic's famous Defender class jedi corvette! - fits in 4 figs in the 2 cockpit sections - rotating top turret with stud shooters - some openable space in the back for the box-pieces - landing geas with landed and flight "setup" - highly posable engines - technics handler More pictures and instructions at Rebrickable: https://rebrickable.com/mocs/MOC-242051/zsoltom/defender-class-light-corvette-75362-75337-alternative/#details

crazy, love it :D

My newest Nu-Class alt just dropped on Rebrickable, this time it's made of the 75402 ARC-170 and the 75432 V-19 torrent combined. https://rebrickable.com/mocs/MOC-234971/zsoltom/republic-nu-class-attack-shuttle-75402-75432-alternative/#details Fits in 1 pilot and 9-12 figs, wings keep their position at all angles, sturdy build with removable top and a recon scout speeder bike as a side build More pics and infos, aaand the instructions are available at Rebrickable ;)

My 3rd alt from this year's new ARC 170 is here: a Republic Vector starfighter! More pictures and instructions here: https://rebrickable.com/mocs/MOC-229908/zsoltom/high-republic-vector-starfighter-75402-alternative/#admin Fits in a fig and an astromech, all wings are moveable, projectile shooter, displaystand, sturdy,swooshable

my newest alt from the 75362 is released on rebrickable, available as a single moc, and part of my ever expanding bundle: a low altitude support gunship based on Jay Blencowe's fan concept: more pictures and instructions: https://rebrickable.com/mocs/MOC-230554/zsoltom/ahsoka-tanos-low-altitude-support-gunship-75362-alternative/#details

second alt from the Renegade is here, after the Falcon i had to decide: will it Gunship? And man, it does;) The renders are far derpier than how it looks irl, no matter from what angle i do the renders.... - 2 figs fit in the cockpit - 6-8 in the back - can fit some minifig related pieces under the blacktron flag piece - openable back ramp (leads to an empty room, you might be able to do something to it with some extra pieces) - has 1 of the Renegades gliders, but did some minor changes, can be attached to the back of the gunship, fits 1 fig (adding 2 more wings give it some cool wing-configurations, and if you move around the yellow triangle pieces, you can really have some nice shapes) - moveable front cannons - the droid was unharmed - sturdy, displayable, playable, deisgned and tested irl, it works More pix and instructions: https://rebrickable.com/mocs/MOC-220658/zsoltom/blacktron-gunship-blaatktron-10355-alternative/#details

thanks for the shout out mate:) Also, Cody, you did all the alts from the set i wanted to do (except the v-19), and have no idea what to build from it..:') At least i havent gotten it yet (ordered on may 1st 00:53....) so i have some time to think :D

I was sure i could build this scout from those 2 boxes, but the end turned out too good imo, im so proud of this badboy :) - cockpit for 2 clone pilots - detachable cockpit - moving wings - 4 projectile shooters - spot for an astromech head - sturdy, playable-displayable, designed and tested irl More pictures and instructions: https://rebrickable.com/mocs/MOC-218039/zsoltom/republic-scout-fighter-75402-75401-alternative/#admin