shiny_car

@legosolete Yes, let me know your email and I can send it.

@Cho7en no problems. PM sent, thanks. Please note, I have the design as a stud.io file. It is not instructions per se.

@Vlady PM sent, thanks.

Message me your email, and I can send them.

Purchased and downloaded, thank you!! Go for it peoples https://www.brickvault.toys/products/venator NB: apologies if I have stolen your thunder

I encountered this issue just now. I had 3 'long' versions, and 4 'short' versions amongst the 7 required for this MOC. All my spare Black and Trans-Clear were short. Fortunately, I just bought the Hoth AT-ST 75322, and there are 2 Black studs in the set (1 required, 1 spare). I opened the set and they are both 'long'! Perhaps the long version is newer, and replacing the short ones?

Awesome! I've been waiting for a quality T70 like this. Thank you Jerac. Now to buy the pieces!

@rybojoho PM sent. Thanks

@OskarFridrik no problem. PM sent. I can email it to you.

Message me your email and I can send the stud.io file. This presumes you are familiar with stud.io and can generate the parts list from it into BrickLink, and 'deconstruct' if necessary to work out how to build it.

Looks awesome in flight mode! Glad the stand works, but most credit still goes to Cavegod and Cjd because the structural design (eg: length of Technic pieces, angle, positions) of the vertical tower is primarily theirs.

Cool, thanks for the feedback. Hopefully it's solid enough.

I've emailed the Stud.io file. It's not instructions, but should be enough to work out how to build it. lol, don't need payment!

No problems, will send. The wings are quite heavy. In flight mode, they put quite a bit of strain through the main body structure. It's ok to move around, no issues, but I've always been gentle. I would not consider it 'swooshable', but definitely 'movable'.

Sending you a PM.

Here's a render of my stand design. I suspect the 'cladding' that Cjd added would add extra stability, particularly again twisting and leaning. @Cjd223 did you try the stand without the cladding? I notice that you and Cavegod use Technic 1x16 Bricks as the main pylons (and Cavegod added tiles to join them together), whereas I have chosen Technic 1x15 Liftarms. Perhaps I should change to the Bricks.

Wow, looks fantastic. I have ordered all the bricks I need via BrickLink, and waiting for everything to arrive. For the stand, I redesigned the original stand that Cjd created. My design is made on Stud.io, so I have not built it to confirm that it is structurally sound, however it is based upon the original one, using the same internal 'scaffold' Technic Liftarm bracing, so it should be ok. I'll generate a render from Stud.io and post it here shortly. It is the same height as the original. Eventually, I will have a Lambda MOC Shuttle with wings unfolded (all parts here, unbuilt) + Cavegod's Kylo Upsilon Shuttle on a stand (wings 'out'; built but currently with 'wings folded') + this Krennic Delta Shuttle with wings unfolded, side-by-side, so they create a /\ \/ /\ pattern!

Awesome! Thanks so much, to you and Cavegod. I can't wait to acquire all the parts and build this.

Woohoo! Can't wait. I pre-ordered in January, lol. Thank you!

I've been buying random Black Wedge Plates with my recent BrickLink orders, lol. Thanks for the update.

I used 42446 without any problems. My v81 instructions say to use 42446.

Awesome build! As others have said, huge credit to Jerac (and anyone associated with the design and instructions and release) for this MOC. The minor 'issues' I encountered seem to be addressed in v84, though I just worked around them via v81. This is one of my favourite MOCs, and I've built a reasonable number. I can also highly recommend Jerac's other superb Star Wars MOCs, including the TIE ln, TIE Advanced, FO TIE, X-Wing, and Y-Wing: all really enjoyable and great display models. I've included some comparison photos with the official Lego Razor Crest. Towards the bottom of this post I've also included some photos of minor mods I performed; just subtle details. I built a 'fixed' front landing pad. I haven't built the stand, so the Razor Crest will sit on its own feet. This also levels-out the ship. I replaced Blue Axle Pins with a Black 3L axle in the rear landing gear, and DBG Axle 4 with Stop: I modified the top 'escape pod' section, which required a bit of work because Jerac's design is intricately integrated. The section was shortened 2 studs and I used a DBG Boat Stud piece to replicate the viewport (window) in the pod. The front edge was simplied using slope pieces (arguably less 'interesting' to the eye, so Jerac's design has merit): Finally, I deleted one of the 'window' section behind the canopy, which better-replicates the production version. One of Jerac's windows is actually incorporated into the Lego windscreen piece. The back Wedge Bricks are moved forward one stud: Thanks for looking, and I highly recommend you build this MOC if you're sitting on the fence thinking about it.

PM sent.

Awesome! I can't wait to build this, and look forward to the release of the instructions. Great work guys. However, I prefer the more 'basic' Black Technic stand that Pete built. By chance will the instructions include the build for this one instead of the elaborate 'drawer' version? It would also probably reduce the number of parts required .

PM sent.