Jump to content

apoupada

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by apoupada

  1. apoupada
    I've built the model, but the gears keep skipping, does anyone have any insight as how to fix that?
  2. apoupada
    Does anyone know what all the black 1x6 tiles are for in the build (according to Cjd223's rebrickable page)? I couldn't find it anywhere.
  3. apoupada
    If my math is correct, AT-St comes should be around 7.4"-7.6". Depending where you look the height of an AT-ST differs (Starwars.com has it at 8.6M = 338.58" or Rogue One visual Guide 9.04M = 356") If a minifig is equivalent to 5'10" or 70". It means then AT-St should be 5.085 times bigger the mini-fig (356"/70"). The mini-fig's height is 1.5" at 5.085 times bigger the AT-ST should be 7.4". If the minifig equates to 6' then it should have a height of 7.4"
  4. apoupada
    Would you mind sharing your instructions?
  5. apoupada
    I would be curious to see that
  6. apoupada
    Lego Bricks and pieces sells these for 0.25$ CAD a pop & sells 43898 for 0.36$ CAD
  7. apoupada
    According to my calculations if a mini-fig equals 5'10" (1.78m) an AT-AT should measure a little under 19", an At-st should be 7.6" and an At-ACT should be 26.87". If a minifig equals 6' then AT-AT should be 18.45", at-st 7.4" and a at-act 26.125". There's another AT-AT moc that I saw that is about 20" that I'm considering building instead of this one even though i bought the instructions already.
  8. apoupada
    Is it possible to replace 2695 with 69208
  9. apoupada
    You can now a straight color swap without part substitutions. Lego now has the hinge pieces in black as well as the 2x2 round piece tile with the hole
  10. apoupada
    I bricklinked it, it came out to 10$ cheaper including the minifgs. At the time I said I should have bought the set and bricklink the missing parts, but thinking about it now I'm glad I went the bricklink route. Unless you have plans to use those extra light & Dark bluish gray parts.
  11. apoupada
    here you go https://www.dropbox.com/s/fq6rmuemffna3dg/75104-parts-list.xlsx?dl=0
  12. apoupada
    I figured out a way to have the rear hatch on my black Kylo Ren shuttle. Here's my mod, both hatches open http://imgur.com/a/8UMiZ
  13. apoupada
    I figured out a way to have the rear hatch on my black Kylo Ren shuttle. Here's my mod, both hatches open http://imgur.com/a/8UMiZ
  14. apoupada
    So i tried all these possibilities to try and get the rear hatch to open and I was able to get one but it became too flimsy and it would fall off. So back to the drawing board.
  15. apoupada
    easiest way is to go to bricklink and input the set number and then under "wanted" select part out. Make sure to select the minimum desired quantity. Then manually edit all the non-black items to black. But review my list before finalizing it on bricklink cause there are parts you won't use and there's some extra parts I added. If you want make it completely black you'll have to make more mods, I still haven't completely finished cause I'm waiting on some parts.
  16. apoupada
    Does your hatches swing open? If so, what parts did you use?
  17. apoupada
    Last night I built the hatches as close as I could to Jangbricks. I tried attaching the smaller hatch with a rocking plate (3937 & 6134) and to where the cheese slopes sit, but it wasn't solid and it barely opened. Also by doing it this way there a gap between the two 1x8 rails at the back of the ship. So my next thought was to use droid arms (30377) similar to what the Slave 1 has with its hidden guns. I just need to get the pieces first, but I'm not sure if I should get. Here are my possibilities 1. 30377+2432 or 30236 or 21445 or 18649 or 2540 or 48336 2. 2880+4275+4276
  18. apoupada
    Here's the file https://www.dropbox.com/s/fq6rmuemffna3dg/75104-parts-list.xlsx?dl=0
  19. apoupada
    Around 120-130 cdn (including the minifigs, kylo was like $30). If I were to do it again.
  20. apoupada
    If you're going to follow Reputator instructions and model, there's some parts you don't need. Mine is almost built, I'm just waiting for a few mores parts for my own mods, once i finish i could send you a list. I personally ordered all the parts in the set in black (where I could) but some are not needed.
  21. apoupada
    Ok, so if I'm understanding correctly, the piece in the blue circle (In the first picture), should NOT be placed where the yellow circle is as per the normal instructions? The reason I ask, is cause from the pic you uploaded it looks like it's there (2nd pic)
  22. apoupada
    I was wondering if you can ans Thanks for the info before, I was wondering if you could answer one more thing. In the top picture I see that on the right of Kylo's cabin you're still using the 1x4 piece with the slider, how were you able to put it back in? I followed your earlier instructions on how to set up the body and that piece is not in there, did you make further mods?
  23. apoupada
    What piece are you using to hold the top red-transparent pieces on the front part of the ship?
×
×
  • Create New...