Cherry-Rose

75098 - Assault on Hoth - Theme: Star Wars/Ultimate Collector's Series LXF File <v4.3.9> Alternate image Errors: Besides the many, many errors that are in the set before building it in LDD? If you say so... -A small gear riding above the left door could not be inserted as the axle it was connected to cannot be rotated enough. -A 1x2 plate with groove was omitted from the front of the ion cannon, due to a collision error. -The red rubber band to fire the ion cannon was placed aside (not flexible) -All of the grey flex tubes are not aligned exactly. -The Taun Taun mold was absent, a brick-built solution was created instead. -The strings used for the snowspeeder's harpoon and the battery pack are not in LDD. -All missing minifigure prints substituted.

21305 - Maze ('A' Model)- Theme: Ideas LXF File <v4.3.9> Errors: -The track rods aren't completely aligned with the ball joints. It's either because it's too precise, it requires flexing, or I'm just bad at it. 21305 - Medieval Maze ('B' Model) - Theme: Ideas LXF File <v4.3.9> Notes: -The sections are grouped so that the maze insert and the locking bricks can be easily removed, and the labyrinth squares can be removed from the base. The maze insert's also divided so that it can be swiped clean so you can make a new one :) -Since a handful of the other alternate models aren't posted yet, I will not include any of them in this post.

70312 - Lance's Mecha Horse - Theme: Nexo Knights LXF File <v4.3.9> Errors: -No Building Errors! -All Missing Prints excluded/substituted. 70313 - Moltor's Lava Smasher - Theme: Nexo Knights LXF File <v4.3.9> Errors: -Part 2460 "Plate 2x2 w/ Vertical Snap" and 32187 "Middle Ring" cannot connect to each other in LDD, the former was replaced with a 2x2 jumper. -All Missing Prints and Figure Moulds excluded/substituted. 70314 - Beast Master's Chaos Chariot - Theme: Nexo Knights LXF File <v4.3.9> Errors: -Part 6558 "Connector Peg w/ Friction 3m" and 32187 "Middle Ring" cannot connect to each other in LDD, the former was replaced by a 2m pin and the latter scaffolded. -Part 50860 "Motorcycle Fairing 1" and 99021 "Bush w/ Connector Piece" cannot be clipped together as shown on the instructions, the former was scaffolded and the latter placed aside. -I can't quite align the Chains connecting the chariot to the globlins. It's difficult to see but they're not quite attached. -Part 85959 "Flame 7m Shaft (/) 3,2" lacks gradient. -All Missing Prints and Figure Moulds excluded/substituted. 70315 - Clay's Rumble Blade - Theme: Nexo Knights LXF File <v4.3.9> Errors: -Parts 43722-43733 "Right/Left Plate 2x2 w/ Angle" on the motorcycles cause a collision error when being placed in the slots made for them, one on each was removed. -The flying sword cannot be angled downward as far as shown in the instructions. Unsure as to why. -The red creature thingy was ommitted due to lack of parts. -All Missing Prints and Figure Moulds excluded/substituted.

21123 - The Iron Golem ('A' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -The new head for the iron golem/villagers not in LDD, replaced by 98384 -Part 18789 "Tool No. 3" not in LDD, replaced by 3841 -Part 20057 "Animal Head no. 13" (Pig) not in LDD, replaced with custom solution. -The new 1x2 plate with the minifig head holder not in LDD, replaced with a 1x2 Jumper. -The printing for the Crafting Table, Furnace and Iron Golem not in LDD. -All Minifigure Prints excluded. 21123 - The Iron Golem ('B' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -The new head for the iron golem/villagers not in LDD, replaced by 98384 -Part 18789 "Tool No. 3" not in LDD, replaced by 3841 -Part 20057 "Animal Head no. 13" (Pig) not in LDD, replaced with custom solution. -The new 1x2 plate with the minifig head holder not in LDD, replaced with a 1x2 Jumper. -The printing for the Crafting Table, Furnace and Iron Golem not in LDD. -All Minifigure Prints excluded.

42049 - Mine Loader - Theme: Technic LXF File <v4.3.8> Errors: -Part 60819119 "Cross Axle 2M with Snap w/ Fric" Not in LDD, replaced by 451926. -The new L-Shaped piece used for the fenders and the back walls, whatever it's called, are not in LDD. Replaced with brick-built solution. -Parts 18938 and 18939 which make up Turntable Z60 are not in LDD, replaced by 51063. -Part 18654 "Beam 1x1" not in LDD, replaced with custom solution. -A handful of axles were left out as certain sections will not align legally.

21122 - The Nether Fortress ('A' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Part 18677 "Plate 1X2 W. Horizontal Hole Ø4,85 Rev." not in LDD, replaced with custom solution. -Part 18649 "Plate 1X2 W. 2 Shafts ظ 3.2" not in LDD, replaced by 2 of 61252. The tentacles of the ghast needed to have the clips replaced with handles because of this. -Part 18787 "Weapon No. 3" not in LDD, replaced by 76764 -Part 18792 "Weapon No. 4" not in LDD, replaced by 4499 -Part 19723 "Armour No. 13" and 19730 "Figure Helmet No. 1" not in LDD, replaced with 3840 and 4740. -Part 15403 "Plate 1x2 w/ Shooter" not in LDD, replaced by 15391. It's in almost exactly the same place, however a small handful of elements from the Ghast needed to be removed or changed. -Speaking of Ghasts, the 3 prints for 87079 "Flat Tile 2x4" are not in LDD. -All missing minifigure Prints were substituted. 21122 - The Nether Fortress ('B' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Part 18677 "Plate 1X2 W. Horizontal Hole Ø4,85 Rev.” not in LDD, replaced with custom solution. -Part 18649 "Plate 1X2 W. 2 Shafts ظ 3.2" not in LDD, replaced by 2 of 61252. The tentacles of the ghast needed to have the clips replaced with handles because of this. -Part 18787 "Weapon No. 3" not in LDD, replaced by 76764 -Part 18792 "Weapon No. 4" not in LDD, replaced by 4499 -Part 19723 "Armour No. 13" and 19730 "Figure Helmet No. 1" not in LDD, replaced with 3840 and 4740. -Part 15403 "Plate 1x2 w/ Shooter" not in LDD, replaced by 15391. It's in almost exactly the same place, however a small handful of elements from the Ghast needed to be removed or changed. -Speaking of Ghasts, the 3 prints for 87079 "Flat Tile 2x4" are not in LDD. -All missing minifigure Prints were substituted.

I don't think this will qualify as a regular entry. Heck, I'm almost certain it won't. It's the inspirational model on the back of the instructions which could be counted as interpretive although as it's just the existing modules rearranged, it's easy to place them in their exact location. 21118 The Mine ('C' model) - Theme: Minecraft - LXF file Missing Pieces: White (Minifig, Head Modified Cube with Minecraft Skeleton Face Pattern) is not in LDD, replaced with 98384 ROBOT HEAD 2. Black (Plate, Modified 1 x 2 with Cube with Red and Dark Red Pixelated Face Pattern (Minecraft Spider)) is not in LDD, replaced with 98384 ROBOT HEAD 2. Dark Green (Minifig, Head Modified Cube with Minecraft Creeper Face Pattern) is not in LDD, replaced with 98384 ROBOT HEAD 2. Dark Green (Creature Torso Blocky with Cube Feet (Minecraft Creeper)) is not in LDD, replaced with Custom Solution Reddish Brown (Minifig, Weapon Bow with Arrow Blocky (Minecraft Bow)) is not in LDD, replaced with 10258 BUE COMPOUND. Dark Brown (Minifig, Head Modified Cube with Minecraft Steve Face Pattern) is not in LDD, replaced with 98384 ROBOT HEAD 2. Silver Metallic (Minifig, Headgear Helmet Rectangular (Minecraft)) is not in LDD, replaced with 3068 FLAT TILE 2X2. Silver Metallic (Minifig, Weapon Sword Blocky (Minecraft Sword)) is not in LDD, replaced with 76764 MINI SWORD. Silver Metallic (Minifig, Utensil Pickaxe Blocky (Minecraft Pickaxe)) is not in LDD, replaced with 3841 MINI PICKAXE. Silver Metallic (Minifig, Armor Breastplate Rectangular (Minecraft)) is not in LDD, replaced with 2587 MINI ARMOUR. Missing Prints: White (Brick 1 x 2 with Black 'TNT' Pixelated Pattern) is not in LDD, not replaced with a different decoration. Dark Azur (Torso with Pixelated Green Neck Pattern (Minecraft) / Dark Azure Arms / Green Hands) is not in LDD, not replaced with a different decoration. Dark Azur (Torso with Pixelated Light Flesh Neck Pattern (Minecraft) / Dark Azure Arms / Light Flesh Hands) is not in LDD, not replaced with a different decoration. Building Errors: The contruction between parts 2921 "Brick 1x1 w/ Handle" and 88393 "Brick 1x2x5 w/ Groove" causes a collision error only at the bottom plate level, for some reason. This was remedied by moving the latter down one plate by removing the 2x2 plate underneath it (the other, non-grooved column being supported by a 1x2 plate. On top of the grooved column are 2 1x1 round plates.

21121 - The Desert Outpost ('A' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 18789 “Tool No 3.” not in LDD, replaced by 3841 -Part 18787 "Weapon No. 3" not in LDD, replaced by 76764 -Part 18792 "Weapon No. 4" not in LDD, replaced by 4499 -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Part 21098 "Animal Head No. 15" not in LDD, replaced with custom solution. -Part 19723 "Armour No. 13" and 19730 "Figure Helmet No. 1" not in LDD, replaced with 3840 and 4740. -Print for Flat Tile 1x1 (Cookie) not in LDD -Print for Brick 1x2 (TNT) in LDD. -Print for Brick 2x2 (Furnace) not in LDD. -Print for Brick 1x2 and Tile 2x2 (Crafting Table) Not in LDD -All Missing Minifigure Prints Not Present. 21121 - The Desert Outpost ('B' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 18789 “Tool No 3.” not in LDD, replaced by 3841 -Part 18787 "Weapon No. 3" not in LDD, replaced by 76764 -Part 18792 "Weapon No. 4" not in LDD, replaced by 4499 -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Part 21098 "Animal Head No. 15" not in LDD, replaced with custom solution. -Part 19723 "Armour No. 13" and 19730 "Figure Helmet No. 1" not in LDD, replaced with 3840 and 4740. -Print for Flat Tile 1x1 (Cookie) not in LDD -Print for Brick 1x2 (TNT) in LDD. -Print for Brick 2x2 (Furnace) not in LDD. -Print for Brick 1x2 and Tile 2x2 (Crafting Table) Not in LDD -All Missing Minifigure Prints Not Present.

21119 - The Dungeon ('A' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 18789 “Tool No 3.” not in LDD, replaced by 3841 -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Print for Plate 1x1 (Zombie Spawn) not in LDD. -Part 18677 "Plate 1X2 W. Horizontal Hole Ø4,85 Rev.” not in LDD, replaced with custom solution. -All Missing Minifigure Prints Not Present. 21119 - The Dungeon ('B' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 18789 “Tool No 3.” not in LDD, replaced by 3841 -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Print for Plate 1x1 (Zombie Spawn) not in LDD. -Part 18677 "Plate 1X2 W. Horizontal Hole Ø4,85 Rev.” not in LDD, replaced with custom solution. -All Missing Minifigure Prints Not Present. 21120 - The Snow Hideout ('A' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 18789 “Tool No. 3” not in LDD, replaced by 3841 -Part 18791 “Tool No. 4” not in LDD, replaced by 3837 -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Print for Brick 1x2 and Tile 2x2 (Crafting Table) Not in LDD -Print for Brick 1x2 and Tile 1x1 (Snow Golem) not in LDD -The Creeper is a completely custom assembly. -All Missing Minifigure Prints Not Present. 21120 - The Snow Hideout ('B' Model) - Theme: Minecraft LXF File <v4.3.8> Errors: -Part 18789 “Tool No. 3” not in LDD, replaced by 3841 -Part 18791 “Tool No. 4” not in LDD, replaced by 3837 -Part 20044 “Figure Head No. 1” not in LDD, replaced by 98384 -Print for Brick 1x2 and Tile 2x2 (Crafting Table) Not in LDD -Print for Brick 1x2 and Tile 1x1 (Snow Golem) not in LDD -The Creeper is a completely custom assembly. -All Missing Minifigure Prints Not Present.

While I work on some dedicated projects, I might as well leave this smaller Ninjago set here. 70601 - Sky Shark - Theme: Ninjago LXF File <v4.3.8> Errors: -The New Skull Sword Piece is not in LDD, replaced by 2530 -The New Sword of Souls wielder not in LDD, replaced by 93058 and 48729 -Part 18671 “Brick w/ Plate 2x3x1 1/3” not in LDD, replaced by brick-built solution. -Part 18394 "Wing Fire W/Shaft Ø3.2 Mm/4 Mm 41/44” not in LDD, replaced by 11100. Also, no gradient. -All Missing Minifigure Moulds and Prints Substituted

I think I could help out with this soon. :) EDIT: Never mind. It seems that the tubes in the instructions need to be scrunched at the point where they bend, while LDD will only bend it without scrunching it, so that way they cannot get to the correct angle. I did find that, looking ahead in the instructions, that you can just place the ends s close as possible to those points and it won't affect the rest of the model's build, so just try doing that.

Welp, here it is. Arguably the most anticipated set of the year... once again. 10251 - Brick Bank - Theme: Modular Buildings LXF File <v4.3.9> Errors: -Parts 6141 "Plate 1x1 Round" and 15740 "1x1 Decoration Top No. 1" cause a collision error and cannot be placed on top of each other, the latter was ommited. Seen in the decorations above the stain glass. -As there's a collision error between the parrot and the window pane on the second floor, the filing cabinet needed to be moved. -The Desk's typewriter utilizes a formerly illegal building technique of connecting clips to tiles. The tile will be floating slightly to accommodate. -The Chandelier uses an illegal technique of placing an 85651 with a 30153, that was scaffolded. Missing Prints: -Any Missing Prints for 23088 "Flat Tile 2x2" are substituted. -Any Prints for 60803 "Glass for Frame 1x4x6" not substituted. -Any Prints for 98138 "Flat Tile 1x1, Round" not substituted -Print for 87079 "Flat Tile 2x4" substituted with a collage of other prints on different sizes of tiles. -All Missing Minifigure Prints were Substituted.

70409 - Shipwreck Defense - Theme: Pirates LXF File <v4.3.8> Errors: -No Building Errors! -Print for 11055 (Flag) Missing -All Missing Minifigure Prints were Substituted. 70410 - Soldier's Outpost - Theme: Pirates LXF File <v4.3.8> Errors: -Part 6076594 "Small Torn Cape" not in LDD, replaced with Custom Solution. -Print for 11055 (Flag) Missing -All Missing Minifigure Prints were Substituted. 70411 - Treasure Island - Theme: Pirates LXF File <v4.3.9> Errors: -The Parrot cannot be painted in 2 colors, here it is solid red instead of a red-green fusion. -Print for 11055 (Flag) Missing -The Print for the Map is incorrect. -All Missing Minifigure Prints were Substituted. 70412 - Soldier's Fort - Theme: Pirates LXF File <v4.3.8> Errors: -Part 14225 "String 30m w/ 2 Knobs" not in LDD, replaced by a system of chains. -Print for 11055 (Flag) Missing -Print for 19657 (Flag) Missing -All Missing Minifigure Prints were Substituted.

60111 - Fire Utility Truck -Theme: City/Fire LXF FILE <v4.3.8> Errors: -The New 1x2x2 2/3 brick with 4 studs on one side not in LDD, replaced with custom solution -The New string with ball joint on the end, along with it's corresponding stud shooter, are not in LDD. No Substitute for the string, the stud shooter was replaced. -All Missing Minifigure Prints Substituted 60112 - Fire Engine - Theme: City/Fire LXF File <v4.3.8> Errors: -Part 6115080 "Plate Round w/ 1 Knob" Not in LDD, replaced by 6055313. -The new string with ball joint on the end, along with it's corresponding stud shooter, are not in LDD. Heck I don't even think the regular strings are flexible if there are any at all. The stud shooter was substituted by you-know-what. -All Missing Minifigure Prints were Substituted.

60131 - Crooks' Island - Theme: City/Police LXF File <v4.3.9> Errors: -Part 4294289 creates a collision error with parts 4180504 and 4180533, so the latter two were omitted and replaced with 51739 and 3023. This is seen in front of the getaway boat. -All Missing Minifigure Prints were Substituted. 60119 - Ferry - Theme: City LXF File <v4.3.8> Errors: -No Building Errors! -All Missing Minifigure Prints were Substituted.

41115 - Emma's Creative Workshop - Theme: Friends LXF FILE <v4.3.8> Errors: Part 6126113 "Plate 1x1 w/ 3.2 Shaft w/ 1.5 Hole" Not in LDD, replaced by gold 33219. Part 6096993 "Scissors w/ 3.2 Shaft" not in LDD, replaced by 98139. Printing for the 1x1 Round Pearl Gold Tile (Gemstone) and the 1x1 Yellow Tile (Sticky Notes) not available. Emma's Minidoll is custom as LDD lacks all her parts (Seriously, what's up with that?) 41116 - Olivia's Exploration Car - Theme: Friends LXF FILE <v4.3.8> Errors: Printing for the 1x1 Yellow Tile (Sticky Notes) not available. Part 617901 "Plate 4x4 w/ 4 knobs" was changed from white to navy blue, to account for the missing sticker. The new double-wide version of "Brick w/ Bow 1/3" not in LDD, replaced by the single-wide 50950. Part 6112751 "Plate 1x1 w/ 3.2 Chaft w/ 1.5 Hole" Not in LDD, replaced by Clear 98138. This will change the 1x2 Plates with clip on the sideview mirrors to a 1x1 plate and a lamp holder. Part 6093053 "Plate Round w/ 1 Knob" Not in LDD, replaced by 14769 There appears to be a new tire piece that's slightly thicker, although I can't confirm. The one used here is 87697. Olivia's Minidoll is custom as LDD lacks all her parts. 41118 - Heartlake Supermarket- Theme: Friends LXF FILE <v4.3.8> Errors: The new "Wall Corner 1x2x1" not in LDD, replaced by 6231. Any piece with a Grocery Store logo sticker on it was recolored Lime Green. Unfortunately every last piece of printed food's not in LDD. Too bad, they're really what made the set great Part 6115080 "Plate Round w/ 1 Knob" Not in LDD, replaced by 6055313. 1 Part is labeled as "Placed Incorrectly" and will be removed (the chicken leg on the counter) Mia and Daniel's Minidolls are custom as LDD lacks all their parts. 41119 - Heartlake Cupcake Café - Theme: Friends LXF FILE <v4.3.8> Errors: The new "Wall Corner 1x1x2" not in LDD, replaced by 6231. The new print for 3039 "Roof Tile 2x2, 45*" (Cash Register) not in LDD, substituted. The prints for 98138 "Tile 1x1 Round" (The Cookie and the Peppermint Swirl) not in LDD. No substitute. The new "4x8, 1/2 Circle" is not in LDD, replaced by 2 of 30565. Part 18646 "Plate Half Circle 3x6 w/ Cut" not in LDD, replaced by 2 of 30357. Part 20310 "Design Brick 1x1x2" not in LDD, replaced by 2 1x1 plates and a Lamp Holder. Part 18653 “Brick 1x3x2 w/ Inside Bow” not in LDD, replaced with custom solution. Stephanie's and Naomi's Minidolls are custom as LDD lacks all their parts. Also the print for the kitten is missing.

75139 - Battle on Takodana - Theme: Star Wars/Star Wars Episode 7 LXF FILE <v4.3.8> Errors: The Bacon-Style Flag Element not in LDD, replaced with custom solution. All Missing Minifigure Moulds and Prints were Substituted. 75140 - Resistance Troop Transporter - Theme: Star Wars/Star Wars Episode 7 LXF FILE <v4.3.8> Errors: No building errors! :D All Missing Minigifure Moulds and Prints Substituted.

60130 - Prison Island - Theme: City/Police LXF File <v4.3.9> Errors: -No building errors :D -All Missing Minifigure Prints were Substituted.

60128 - Police Pursuit - Theme: City/Police LXF file <v4.3.9> Errors: Print for 6046220 "Plate w/ Bow 2x2x2/3" Missing, No Substitute. All Missing Minifigure Prints Substituted. 60129 - Police Patrol Boat - Theme: City/Police LXF file <v4.3.9> Errors: The new large hull piece is not multi-colorable in LDD, left all-black. All Missing Minifigure Prints were substituted.