Mogwai
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Mogwai
-
Hi , this is another Option https://www.modulor.de/abs-rundrohr-opak-farbig-oe-3-2-x-1-6-l-760-mm-weiss.html This Firma ship to EU 7 Colours : white , black ,green , yellow , red , blue , grey Format : 3,2 mm x 1,6 mm and 760 mm Long for 2,- Euro per pieces -
Hi , I rebuild the Ballsorter to this GBC Module Ballthrower ? Michael
-
@9v system Yes , but not all . I have my favorites Stores on Bricklink Have you a new Instruction for the Basketshooter without Baseplate ?
-
This Version use maximum of Speed = 100%
-
Hi ....... i build the BallSorter , thanks to Goggel for help. Not final , at the moment i build the input , but the program works. (not fast , only a testprogram) https://www.youtube.com/watch?v=Rq6SNFDsQLA&feature=youtu.be
-
I have finished the Strain Wave Gearing . It´s works very well and fine . Thanks to Courbet for the Instructions , only one Error found at Page 100 Step 23 .Not use 32270 Gear 12 Tooth Double Bevel Black , replaced with 10928 Gear 8 Tooth Type 2 DBG . Okay , the 36 red Balls and the Snake Slide missed
-
@Blakbird you write : interfering with the trigger. I tried putting a 1/2 bush on the end of the axle but then it was even worse. I think to all the Modules (unloader/loader/crane loader/switch) Detail with the shock absorber add a plate on the groundfloor to make it higher. to all the bricks ,not only the yellow wedge.i can not try this , at the moment on assembly and home only on weekend . I hope you understand what i mean
-
Whow,that`s fine ... Courbet the next Akiyuki ?
-
Great thanks to this instructions , the videos of rebricker is fine too , but with pdf is number one
-
Uff , i have build the Basket Shooter and nice work . Only a little problem with this module . My M-Motor(s) work 2-3 Min. correct and slower,slower,stop . Temp of the motor is a little warm , not hot. wait 1-2 Min. and start again , work correct and slower,slower,stop. I replace the M-Motor with the L-Motor and no problem´s . i think the L-Motor have more Power (torque) ?
-
Mhm , i have problem with the small step between the ramp and balls roll down . i think is a problem how many balls are there ? i use only 50 balls and many stay at the small step and at the ramp . more balls evtl. ignore this ? but this is individual for the builder :-) with my steps i have no Problems :-) why stress to the part ? only 1 stud correction down :-)
-
Hi , i build the fork and i think this steps are better for working Page 19 Step 11 = add 1x 32184 (Axle and Pin Connector Perpendicular 3L with Center Pin Hole) (missing in this Step) Page 27 Step 16 = not 4x Plate 1x2 , use 2x Brick 1x2 Page 46 Step 23 = not 2x 13 Liftarm , use 2x 11 Liftarm (the balls roll better down) at the top of the liftarm use only 1x Pin with Frictions at the Axle and Pin Connector Perpendicular 3L with 2 Pin Holes)
-
@Kumbbl: The Catch & Release module is fine to start there is no problem to config the outputramp with normal technicbeams and roll back to the input
-
ZigZag Module with indexer and outputramp (yellow) by Akiyuki www.YouTube.com/watch?v=sUtS52lqL5w#t=9 min. 01:13 - 01:29
-
42009 Retired
Mogwai replied to andrewganschow's topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi , There are many of them here in Poland , visit allegro.pl -
@Blakbird Super instructions , thanks and very nice idea to add a motorized compressor under the support stand Perfectly
-
Mhm,what is better work with this nice module !!! I think one pump is not strong enough for this , better work with two ? or one pump incl. the Airtank ? Anyone try this ?
-
Bucket Factory from Year 2010 ? Min. 4:06 - 4:53 anyone build this Module ? I like the two arms mechanical with the chromed dishes
-
Nice , thanks for the link
-
I like this Projekt from Akiyuki : LEGO Automatic Crane Loader for GBC Train . It´s not big Video from this to make a Replica , very hard Work to do this but i think the User : alanburchill it´s on the right way @ alanburchill : please post your Resultat here THX Mogwai from Germany (live in Poland)
-
Why fake engine parts ? it`s normal Wheel 18 x 14 with Axle Hole, Fake Bolts and Shallow Spokes nr.55982 I search a solution for the very expensive LEGO Part 71128 - Dish 2 x 2 x 2/3 Light Reflector (6,-€ per piece) and try this Wheel. It´s very nice work and a big plus is to work with Zamor Sphere too . This is evtl. a way for People they have not Soccer/Basketball/Beach Balls and can build this module . At the Moment i try to build a loader which work with the two balltypes . Sorry for my School english
-
I have found the Option for upload here the Pictures of : Wheel to Wheel
-
That´s nice ... and work with GBC-Module ?
-
Hallo , kann ich hier auch in Deutsch schreiben ? Mein Englisch ist nicht so gut aber ich probiers mal . I have made the Cup to Cup Modul but without the loader . Found new Cups and they are working fine with the standard balls and Zamor Spheres The Original Cup/Dish cost 6,- Euro per piece How can i upload Photo´s ?
