Search the Community
Showing results for tags 'General motors'.
Found 2 results
Murdoch17 posted a topic in LEGO Train TechI already have a real-world Aerotrain LEGO model completed, and was fiddling around while bored when I came across this Classic Space version of the train from 2018. I had to take out the upside-down slanted coach windows because the parts don't exist in trans-yellow yet. I added different windows, red and green directional lights, and a bigger horn that looks like a thurster pod. I used black wheels instead of gray ones because they are cheaper and easier to find, but you'd never know that because I hid them behind SNOT'ed panels that look more like the prototype. Then, I deviated wildly from the GM Aerotrain and added a Baldwin Sharknose type-end to the front of the engine to make it even more unique. The classic space 4 x 2 slope from Benny's spaceship would go right below the headlight, of course, if built in real bricks. Also, as a side note, a 9V motor can be added to the engine for shows alongside my CS base / vehicles. (I don't own a 9V motor or track, but some GtwLUG members do and have offered to try out my locos with 9V power in the past.) The engine has been thoroughly made into a futuristic space locomotive... which was't too hard as it was already pretty forward-thinking designed originally. The roof is now removable, with seating for a driver and dual weight bricks for adding traction to the 9v motor. (when it has one for shows) As a concession to using trans-yellow as a window color, I had to remove the original slanted GM Fishbowl-bus style windows that were used on the original Aerotrain due to lack of parts in that color. The rear of the train has no coupler as it's "supposed" to be a part of one complete train-unit. Time will tell when this model gets built (most likely around December), but I've already re-designed the front door of the space base to handle train tracks so the train can enter and exit the walled-in base and the doors still open and shut. Any thoughts on this? EDIT: ...and here is how the system will work: link to video showing Aerotrain in motion at Flickr Please excuse the pineapple couch, its my dads, as is the borrowed 9v equipment. The motor sadly only can pull three cars and at full speed only or not at all. But, it is a step towards having it run at train shows! (if anyone can help me figure out how to get the motor to move more than three cars, or add the video to my actual post, please respond below! Thanks to a suggestion by @XG BC, the locomotive now has weight bricks over the (potential) motor, so it should be ready for 9v power for shows next year.... if I get it built by then!
Here we have 3 railway treasures of years past: -Southern Pacific #4460: the only War Baby Daylight left and herald of the end of steam on the Southern Pacific. -The Aerotrain: a failed prototype from General Motors meant to save passenger rail, one of only two ever built (though both survive) -EMD FT #103: the diesel demonstrator that proved steam power could (and would) be forever replaced by diesel locomotives. All three can be built in real life, and the LDD File is included at the bottom of this post. Electro-Motive Division (EMD) FT type #103 diesel demonstrator Built by General Motors (GM) / Electro Motive Division (EMD) in 1939, this is the diesel that showed the way to the future, signaling the start of the diesel era. However, as one day must start, another must end. This two A & two B locomotive set got the ball rolling towards the end of steam as mainline workhorses by pulling a modern two steam engines backwards - while said engines were at full forward throttle. Anyway, this particular engine was originally owned by Electro-Motive as a demonstrator. It was sold to Southern Railway and eventually placed in the Museum of Transportation in St. Louis, Missouri. It was repainted in it's original Electro Motive colors for it's journey to Railfair '91 held in Sacramento, California. It is currently on display once more in the St. Louis Museum of Transportation. The FT class eventually led to the entire F series, one of which is presumably the basis for the Santa Fe Super Chief engine in set 10020. This LEGO model features the the round porthole windows and no interior. The windshield is supposed to be the printed version from the Horizon Express. The three exposed studs on each of the nose sides are for tiles spelling out "103". Here is it's real world counterpart in 1989. (photo by Wrong Main on Flickr, seen here: http://www.flickr.co...r-dDFRKh-dxsdeg ) Sadly, the B-Unit is now a rusted hulk, but the A unit is thankfully still in this pristine condition. Southern Pacific GS-6 Daylight #4460 steam locomotive Southern Pacific 4460 is the only surviving GS-6 Class steam locomotive. The GS-6 is a semi-streamlined 4-8-4 Northern type steam locomotive. GS stands for "General Services". The locomotive was built by the Lima Locomotive Works for the Southern Pacific in 1943. The GS-6 lacked side skirting and red and orange "Daylight" paint found on previous locomotives of the GS class, and were painted black and silver instead. This was because the US government controlled locomotive manufacturers during World War II and had turned down Southern Pacific's order of fourteen new Daylight locomotives. Southern Pacific re-designed the engine for general service and it was finally approved, but the government took four of them and gave them to the smaller and power-starved Western Pacific Railroad Their smaller size when compared to previous GS class locomotives and the fact that they were built during WWII earned them the nicknames of "War Babies" and "Baby Daylights". 4460 is famous for pulling what was to be the final movement of steam on the Southern Pacific Railroad in 1958. Following the final excursion, 4460 was donated to the Museum of Transportation in St. Louis, Missouri, on April 16, 1959, where the engine has since sat along with many other historic steam and diesel locomotives from around the country. The 4460 is sometimes called the "Forgotten Daylight", referring to its only surviving sibling, the very famous Southern Pacific GS-4 #4449. The LEGO version is supposed to have Big Ben Brick XL 4 flanged & 4 unflanged wheels. The one seen here are placeholders. The studs on the cab and tender rear are supposed to have tiles saying "4460" on them, while the tender sides are to say "Southern Pacific". Here we see Southern Pacific #4460 in 2009. (photo by Wampa-One from Flickr. Link: http://www.flickr.co...e-fWQ6dQ-fWQ6gW ) The Lego version is based on Anthony Sava's version of the GS-4 Daylight #4449, a related cousin of the #4460 and the only other Daylight left in existence. I was contacted by Jan Snyder on MOCpages who had this story to tell of his interaction with #4460: General Motors (GM) Aerotrain demonstrator consist The Aerotrain was a streamlined trainset introduced by General Motors Electro Motive Division in the mid-1950s. Like all of GM's body designs of this mid-century era, this train was first brought to life in GM's Styling Section. Chuck Jordan was in charge of designing the Aerotrain as Chief Designer of Special Projects. It utilized the experimental EMD LWT12 locomotive, coupled to a set of modified GM Truck & Coach division 40-seat intercity highway bus bodies. The cars each rode on two axles with an air suspension system, which was intended to give a smooth ride, but had the opposite effect. The two Aerotrain demonstrator sets logged over 600,000 miles (970,000 km) and saw service on the following railroads: the Atchison, Topeka & Santa Fe Railway; the New York Central Railroad; the Pennsylvania Railroad; and the Union Pacific Railroad. Starting in February 1956 the Pennsylvania Railroad ran the Pennsy Aerotrain between New York City and Pittsburgh Pennsylvania, leaving New York at 0755; the round trip was scheduled 7 hr 30 min each way. From June 1956 to June 1957 it ran between Philadelphia and Pittsburgh. In 1956 Aerotrain No. 2 was leased as a demonstrator to the New York Central, and ran between Cleveland and Chicago. In March 1956 the Aerotrain made experimental runs for the Atchison Topeka & Santa Fe Railway in California as the San Diegan between Los Angeles and San Diego. Its use ended because the trainset had to be turned after each trip and it needed helper locomotives on the Sorrento Grade north of San Diego. Starting December 1956 Union Pacific ran the ex-New York Central Aerotrain as the City of Las Vegas between Los Angeles and Las Vegas. The train was eventually relegated to Chicago commuter service on the Chicago & Rock Island Railroad. GM's "lightweight with a heavyweight future" was introduced at a time when US passenger train revenues were declining due to competition from airlines and private automobile travel. Although it featured a streamlined design, the Aerotrain failed to capture the imagination of the American public. The cars, based on GM's bus designs and using an air cushioning system, were rough riding and uncomfortable. The design of the locomotive section rendered routine maintenance difficult, and it was underpowered. Both trainsets were retired in 1966 after a decade's use. The Museum of Transportation in St. Louis, Missouri and the National Railroad Museum in Green Bay, Wisconsin each have one of the locomotives, and two of the cars. This LEGO version is to have a red number tile saying "3" (even though there were only two trains ever built! ) on the cab sides, and i'm not quite sure this will go around curves or switches. This version if based on a couple pictures I saw on Brickshlef. Oh, and the pieces on the front bogie between the wheels are CMF paint cans... has anyone else done that? Aerotrain #3 and it's two remaining cars from the original 10 car set in 2009 (photo by emzepe from Flickr. Link: http://www.flickr.co...s-dHVGkr-edHdNC ) Sadly, the other 8 cars were scrapped. The other Aerotrain set is in an enclosed space in Green Bay Wisconsin. Three Railway Treasures Here we have them all together. LDD file for all three: http://www.mocpages....1395015218m.lxf Comments, Questions, & complaints are always welcome!