Jump to content
Eurobricks Forums

Recommended Posts

Posted

p1301412.jpg

As can be observed in this image, where the double medival doors meet up they meet up perfectly. No overlap, no gaps, no nothing.

So here is my question: How does one get those doors to do that? I am attempting to install doors like this on MY Armada Flagship, but am incapable of getting them to meet up. The doors are about 2 and a half nubs wide, whereas they need to be 3 nubs wide to meet up. I have tried everything I can think of to get them to work, but nomatter what, they either have an overlap or a 1-nub wide gap (the 1 nub actually being taken out of half of 2 nubs)

Can anyone tell me what the trick is to getting these doors to line up? As I recall, I have NEVER been able to get them to work.

Thank you,

- Helden

Posted

A common mistake, the 'holders' which attach the door must face out (perpendicularly to the door), as seen in these instructions. Hope that helps.

God Bless,

Nathan

Posted

I used to have the same problem when I was young. It works perfect if the hinges face out. THat is how god intended it to be.... and by God I mean TLG.

Posted

Yeah, it's kinda a great piece the door set up because you can put it either way. Especially when there are different types and sizes of doors. It's nice how they fit so well together! Good job lego *y* !

  • Governor
Posted
A common mistake, the 'holders' which attach the door must face out (perpendicularly to the door), as seen in these instructions. Hope that helps.

I had this problem once but it didn't last very long because I just rotate the holders until the problem went away.

But my question to Lord Admiral Helden Ravensburg is: Why do you want doors on the Armada Flagship?

  • Governor
Posted

But you're not actually going to put a cabin back there, just merely allude to it?

In that case then you probably should be using green doors like in Armada Sentry to create some kind of sub-theme colour consistency.

Posted

How goes the moc Admiral?

I was looking at the picture again and I noticed, on the left side door, is that blue tape or is that a lego piece? Because the bottom "Hinge connector thingy" looks too low for that blue piece to be.

  • Governor
Posted

Hmmmmm... Yes I see. Good work Governor Broadside!

Come to think of it doors that low wouldn't be able to open because the studs would get it the way. Not that the doors need to open in this particular MOC.

Posted
THat is how god intended it to be.... and by God I mean TLG.

X-O Sacrelege! Shocking funny and true sacrelege!

Hmmmmm... Yes I see. Good work Governor Broadside!

Well done, Watson! X-D I love threads like this where people work together to help someone out. It truly warms my heart...and my aorta.

Posted
Come to think of it doors that low wouldn't be able to open because the studs would get it the way. Not that the doors need to open in this particular MOC.

The doors are designed so that they slide freely over the studs, and it looks to me they are high enough in this creation, but I can't really tell.

Posted
Yes, the pirate forum will improve your entire cardiovascular system if you spend enough time participating in it! X-D

X-D X-D X-D

..and I've been wasting my time at the gym!

  • Governor
Posted
The doors are designed so that they slide freely over the studs

Egad! You're absolutely right Sir Dillion! I just went and tested this on a pair of doors to confirm.

Posted
You could use them door holders sticking in, but I think only if you us a 1x2 plate with one stud in the middle?

Nope. I just tried it out, I guess the hinges need to be facing out.

Posted
I think this is what he's talking about. Correct me if I'm wrong.

If you ask me, I think the other blue parts around it could be slightly discolo(u)red, making the other one stand out more.

post-777-1164601202.jpg

Admiral, you've yet to tell us about the blue thing there Governor Broadside is pointing at, is that tape? Because the hinge part looks low compared to that blue thing/brick...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...