[MOC][Ongoing project] HMS Victory in minifig scale

[Cpt_Flint]

Hey!

So I introduced myself a couple of days ago showing to you my past projects. I mentioned that I planned something big for the future. So here it is, first photos of a project that was on my mind for some time already - HMS Victory in minifig scale. 

First, a few details:
I've assumed a 1:40 scale. Due to the nature of LEGO bricks and certain technical limitations, I’ll be adjusting the scale where needed — allowing for deviations of around 10% or so.
At this scale, the hull will be about 1.7 meters long. Because of the size and my desire to showcase the interior, I’ve decided to split the ship into three sections: bow, midsection and stern.

I'm not sure if I’ll end up building the entire ship, but my plan for the coming months is to focus on the bow section.
I’m OPEN to criticism, so please feel free to share your thoughts and comments!

 

 

One of the challenges: limited possibilities to represent the curved shape of the bow: 

[Jack Sassy]

An impressive start! Are ye planning to keep the black colour for the decks in the future? If so, I would suggest changing them to tan or dark tan, that be more accurate in this case.  I be eager to see more progress on this magnificent vessel.

[Cpt_Flint]

On 6/26/2025 at 11:01 PM, Jack Sassy said:

An impressive start! Are ye planning to keep the black colour for the decks in the future? If so, I would suggest changing them to tan or dark tan, that be more accurate in this case.  I be eager to see more progress on this magnificent vessel.

Nay, black is just the frame. I’m aiming for fully tiled decks — hold in reddish brown, upper decks in tan or maybe dark tan, as ye wisely suggested. I do fear the cost a bit, but who cares. I’ll go with the flow and see where the winds take me! . 

[Jack Sassy]

12 hours ago, Cpt_Flint said:

I do fear the cost a bit, but who cares. I’ll go with the flow and see where the winds take me!

Aye, some projects do take multiple years. I must say that the hull has been constructed impressively. 

[Franco Clarke]

This is an impressive monster of ship, the framing of the hold feels accurate already, capturing the claustrophobic spaces below the waterline. I'm looking forward to seeing this build grow and progress.

[Cpt_Flint]

Hello,

Some time's sailed since my last post and I'm happy to show you progress on my project! Not all bricks are perfectly pressed to each other but it's clearly a building phase so I don't care about that at this stage. New bricks order is on the horizon so I might be able to push the project forward. Let me know what you think of it! 

[Jack Sassy]

Quite a steadfast progress (or is the time rushing too fast? )! Be I correct in assuming that we are looking at the bow?

[HanSime]

That looks like it's going to be one tall ship indeed! How high do you plan to make the masts?

You're building it in removable slices rather than removable decks?

[Cpt_Flint]

14 hours ago, Jack Sassy said:

Quite a steadfast progress (or is the time rushing too fast? )! Be I correct in assuming that we are looking at the bow?

Yes indeed, that's the bow. And the progress, well I try to push my projects forward :D 
 

13 hours ago, HanSime said:

That looks like it's going to be one tall ship indeed! How high do you plan to make the masts?

You're building it in removable slices rather than removable decks?

The overall idea is to have three sections: bow, middle and stern. Each of the sections have removable decks, so we have hold, orlop deck, three gun decks (two as of now). I hope that explains it, I'm not sure what do you mean by slices :) 

About the hights of the masts... Looking at the scale the foremast should have around 1,3m from the quarterdeck to the top. It's going to be complicated to do it but these are problems for the future :D

[Jack Sassy]

7 hours ago, Cpt_Flint said:

And the progress, well I try to push my projects forward :D 

Clearly much faster than I do.  Good work!