SevenStuds Posted December 8, 2015 Posted December 8, 2015 (edited) Hi Guys! This topic is where I will be adding updates to the new parts that I make available via Shapeways. There is also a FB page where I'll be posting new designs. For a bit of personal history, I work in the architectural field and 3D modeling has been a passion for the last 12 years. When I finally had a family of my own, I rediscovered the boxes of LEGO I carefully stored from the 80's. Not long after, I decided to combine the two things I enjoy doing: Technic and 3D. Here are some of the parts that are already size approved and available: The GoPro Adapter is the only product that is available pre-printed on Bricklink in a very limited quantity. Since my intention is not to sell via this thread, you can find more details on the Facebook page in my signature. Edited December 9, 2015 by SevenStuds Quote
Sylvian Posted December 8, 2015 Posted December 8, 2015 Watanabe's... would be cool... anyhow nice stuff so far! Quote
nerdsforprez Posted December 8, 2015 Posted December 8, 2015 Big fan of custom or third party parts. Would not be surprised to see me at your store in the near future! Quote
Andy D Posted December 8, 2015 Posted December 8, 2015 (edited) I am really impressed by the GoPro adapter! Could come handy. I am sure there are lots of little bits that are not produced in LEGO, that could be very handy, so this kind of access sounds really great. But then again, completing something within the limitations of the parts available can sometimes be a fun, learning challenge. Not sure about the shipping from France to the USA. Andy D Edited December 8, 2015 by Andy D Quote
Jim Posted December 8, 2015 Posted December 8, 2015 Sign me up for the GoPro adapter!! And I really like the custom rims/rim covers. It's about time TLG released some new rim covers, like the 599 etc. Quote
2LegoOrNot2Lego... Posted December 8, 2015 Posted December 8, 2015 Excellent, really love that GoPro adaptor indeed, even though I have none... For me the brackets to join those cylinders could be more exciting, it needs a little more industrial look for my part... I absolutely do not doubt they do what they are suppose to do... Quote
SevenStuds Posted December 8, 2015 Author Posted December 8, 2015 Not sure about the shipping from France to the USA. Andy D It's freeee... but only for the limited units currently in the Bricklink store It's about time TLG released some new rim covers, like the 599 etc. I couldn't agree more. This year we got the F40 covers that are extra tiny. If only they could bring out a supplemental pack with some of their great covers. Quote
zweihander Posted December 8, 2015 Posted December 8, 2015 (edited) I'd say a GoPro mount is a very good idea. Any chance the same could be done for the screw type regular camera mounts? Like this one: Edited December 8, 2015 by erelender Quote
SevenStuds Posted December 8, 2015 Author Posted December 8, 2015 Any chance the same could be done for the screw type regular camera mounts? It can definitely be done. The simplest way is to attach something like this to the GoPro adapter: "GoPro HERO Mount Connection to 1/4 inch 20 Camera Mount Adapter" Quote
Andy D Posted December 8, 2015 Posted December 8, 2015 (edited) Wow, it looks like a few GoPro pieces were sold, and it looks like the price went up on the GoPro piece since I checked earlier. It must be a popular item, I seem to remember the price as 13 and something Euro, now it's 14.80 Euro. Andy D Edited December 8, 2015 by Andy D Quote
efferman Posted December 8, 2015 Posted December 8, 2015 I like the rims very much. A really gorgeous design. On the 45 degrees axle connector we have had the same idea. Quote
SevenStuds Posted December 8, 2015 Author Posted December 8, 2015 I like the rims very much. A really gorgeous design. On the 45 degrees axle connector we have had the same idea. Thanks so much Effe! The rims are what I enjoy making the most. I discovered your 45° axle connector and realized I should have searched first to see if it hadn't already been done. Oh well, now there is choice. You have it as a single, which is great! I really like the series of pin connectors you recently did. These are parts that really should exist officially. Quote
Technyk32231 Posted December 9, 2015 Posted December 9, 2015 Wow a lot of things have changed since I was last active on this forum; apparently now there are 1x11 pneumatic cylinders :P Anyway, these parts are really cool and i might have to get myself some.... Quote
tibivi Posted December 9, 2015 Posted December 9, 2015 I really like your wheel series, i looked some time ago on your shapeways shop but they weren't available back then. happy they are now. :) Quote
rm8 Posted December 9, 2015 Posted December 9, 2015 (edited) Got my Rotas and drift filming accessories. Need a car now. Thanks SevenStuds Edited December 9, 2015 by rm8 Quote
2LegoOrNot2Lego... Posted December 10, 2015 Posted December 10, 2015 Got my Rotas and drift filming accessories. Need a car now. Thanks SevenStuds Cool! Quote
rm8 Posted December 28, 2015 Posted December 28, 2015 (edited) My short wheels review (no drift yet, just first look) Edited December 28, 2015 by rm8 Quote
SevenStuds Posted July 5, 2016 Author Posted July 5, 2016 (edited) Here is a little sneak peak of some of the new parts being tested. The more translucent models in the photo are made using the "frosted extreme detail" material from Shapeways, which is their highest resolution option. All surfaces are silky smooth without any contouring. Some further tests will still be required since the precise axle sizing of this material differs from the regular white "strong and flexible" plastic that most models are made in. The disc brake is made with a large hole that fits over the outside of the axle hole extension at the center of a wheel. This allows any LEGO or custom wheel cover to be added without needing space on the actual axle between the cover and the wheel. The beam with custom logo will take advantage of Shapeways' custom option, where anyone can insert their own text or graphic logo onto the model. Unboxing video is in progress. Edited July 5, 2016 by SevenStuds Quote
Jim Posted July 5, 2016 Posted July 5, 2016 Here is a little sneak peak of some of the new parts that will be available soon. Unboxing video is in progress. These are some pretty nice parts! Wheel covers are always welcome. I also like the GoPro mount on the Dog Bone, in rm8's picture Quote
2LegoOrNot2Lego... Posted July 5, 2016 Posted July 5, 2016 Indeed some nice parts...cool additions for those who are looking for these...! Quote
brunojj1 Posted July 13, 2016 Posted July 13, 2016 @ SevenStuds: Are you eventually planning to design some bigger rims (not just caps) with a proper steering pivot suitable for the new Porsche tires? I can see great potential there for endless customization ... Quote
SevenStuds Posted July 13, 2016 Author Posted July 13, 2016 @ SevenStuds: Are you eventually planning to design some bigger rims (not just caps) with a proper steering pivot suitable for the new Porsche tires? I can see great potential there for endless customization ... It would be fantastic to. If a serious buyer requests a particular design, it will happen. The main reason why the covers are more popular is that you can get 4 custom covers for the price of one rim. Let me know :) Quote
efferman Posted July 13, 2016 Posted July 13, 2016 indeed please compare these https://www.shapeways.com/product/944XLHVBE/u-500-wheelcover?optionId=41651395 and these https://www.shapeways.com/product/9N2VW6BKE/unimog-rim?optionId=43160090 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.