Search the Community
Showing results for tags 'legends of chima'.
Found 8 results
-
My son likes Legends of Chima so I suggested we continue the story despite the end of the theme. Since I have Rocket Raccoon, I decided to build a new vehicle for a raccoon tribe. It is designed to be quick to sneak into the lion temple, steal chi and get away. The raccoon tail spins with the moving of the back wheels. The ladder is little big. I made a wall like the lion temple wall and the ladder ends up being excessive. The chi is a little hard to get in and out of the storage compartment. I don't like the laser cannon but haven't come up with anything better. The pictures below are from the ideas project. I had thinner wheels on it before but ideas require currently made pieces. (I really should go back and take pictures with the other wheels as I like that better.) Much of my pieces are old so it has more exposed studs than many current Lego designs. Ideas project
-
REVIEW 70007 - EGLOR'S TWIN BIKE Taking flight on the wings of…jet engines and motor fuel? Theme: Legends of Chima Pieces: 223 Price: USD 24.99 / £19.99 Links: BrickLink / Brickset Sleek, polished and fast with a futuristic look, the Twin Bike sports an air of unparalleled coolness in the Chima universe. You can almost feel the wind blow right through the wing-like structures on the bike, hear the engines rove as the Chi fuels its wheels and sends it down the road with the furious roar of a mean machine. Not to be left behind, Eglor, the Eagle Tribe minifigure in this set is just as cool as his bike, and this duo is surely well worth the buy. Eglor has also appeared in a smaller and cheaper Speedorz set (70105). Read on to see why this set is more worth it than the Speedorz set if you want to get Elgor. Packaging: Front Box Art Let’s start from the beginning. You get a giant picture of a bike running down the road, while Razcal the raven is flying a copter while attacking Eglor. The question of why a raven needs a flying machine in order to fly will be answered later (or at least I’ll try to). What you’ll probably be noticing is the corner of the box showing the bike in its jet mode. And yes, it does look as cool as it looks on the box (more on that later). Back of the Box You can see more of the jet mode in the back, along with the transformation steps that are really, really simple. Oh, and again there’s Razcal the bird using a copter to fly. The box looks great, attractive and all, but let’s get to the set itself!!! Contents: Breaking out the insides of the box Look! Two numbered bags (with smaller bags inside each of them), two giant plastic wheels, a sticker sheet and an instructions booklet. There’s only three stickers on the sheet, which is great for those who don't like putting them on. The stickers do look great though, as will be seen later. The instruction booklet contains the usual instructions, ads and minifig sheet, all of which I'm not going to be showing here. Let’s begin with Bag 1! Bag 1 contents Here you’ll get the bricks needed for building Razcal’s mini-copter, the wheel-base of the Twin Bike and of course, the minifigures themselves. Some of the more interesting pieces You get some shiny metallic parts in this bag, along with Chima’s purple wing pieces and two light-blue Technic wheels. Funny how those wheels are used as steering wheels in giant Technic sets instead of, you know, wheels. This color that the wheel comes in though is exclusive to this set, and has only appeared here so far. Minifigures: Eglor’s front side And heeeere’s Eglor! At least, the front of him without the mask. There is only one word to use for his minifig – amazing. Just take a closer look at his torso and legs. He’s in full military-like garb, with holsters overlapping his chest plate, and he's sporting a six pack underneath all that. I didn’t know birds could have six-packs. Oh well. The belt is also painted in detail, while the holsters continue to the legs, ending with a knee-guard and some yellow claws at the feet. It’s holster-overload, but that’s what makes him look great! The entire dark-blue scheme works beautifully with the silvery white and dark-grey equipment. Wonderful color arrangement, and wonderful design. Eglor has freckles on his light-blue face, and he’s looking kind of serious here, unlike his TV series counterpart where every character is bright, high-pitched and cheery (no offense to the show). Eglor’s helmet piece is in the same dark blue color, different than the usual white of other minifigs from the Eagle Tribe. It’s simply patterned with white stripes, but it’s effective nonetheless. The beak yellow looks a bit thin and faded at first, oftentimes looking like it has mixed with the blue, making it look like bad printing quality. But you get used to the look after a while and actually feels that it matches Eglor. Eglor’s back side and alternate (awesome) face Eglor’s alternate face shows a whole new side of awesomeness. Just check out that monocle!!! He still retains that angry serious look on his face, but it feels different and looks cooler thanks to the red monocle. I can see him being used in a lot of ways, steampunk coming first to my mind. The armor extends to the back (I love how the armor follows his spine structure), and so does the belt and holster. The helmet itself is the same on both sides. Eglor all geared up And thus he grew wings. And a Chi armor. And he looks great. There's nothing much to be said about this character other than he's amazing. The front side of the helmet has the same white pattern. Notice how Eglor’s freckles still show underneath his helmet? That is some great detail. You can feel the character bursting out of this guy. The wings are white, and it’s a nice contrast to his overall blue color. Both faces look great in the helmet. Eglor is definitely one of the best Chima minifigs out there and a must-get for collectors. He's so different from the other tribal Chima characters, it’s as if he came from the future with all his soldier-like equipment and looks! Eglor’s Chi weapon Here’s him with his weapon that looks like a Chi-powered Nunchuck/Bolas (you know, the kind you use to throw at animals and catch them). It’s a bit unwieldy for playing, but it looks great for poses. I wish that there’s some compartment in the Twin Bike to store this weapon, rather than having it kept separately. It sure looks like it'll come in handy during close combat when out of the bike. Razcal’s front side Moving onto the next minifigure, here’s Razcal from the raven tribe. He appeared before in his solo set, Razcal's Glider (70000), so he’s not that exclusive either. The Ravens are almost always excessively equipped and wonderfully so. The Chi chest piece looks great, and Razcal has a little pouch dangling off his torso, in reference to his status as tribe accountant. His face looks menacingly good with the reds all around. Funny how his helmet doesn’t show them though, and it’s even funnier how the beak on his face doesn’t have the same gold plating as it does on the helmet. His helmet itself is awesome; one of my favorite Raven Tribe helmets. Notice that the metal plating on his beak is just an attachment, not the actual beak himself. The rings around his eyebrows and beak ridge adds a nice touch to his character too. I’m going to go ahead and call him Metalbeak from now on. Metalbeak, ahem, Razcal's back side. Whoa! Looks like Razcal’s either cranky, freaked out, or just that he drank too much coffee. Or maybe he really did freak out after seeing the tribe's financial charts plummet to the ground. Either ways, it’s really different from his other face, which is good. His beak is slightly open here and it makes for a pleasant variation. The details on the pouches are also nice, with small glimpses of money/gold coins showing out of his overstuffed pouches. The helmet looks the same but with only two rings. Razcal in gear Black wings, amazing helmet and face combination, this figure is frankly terrifying and awesome. The shiny metal beak looks amazing from the front. Sadly though, Chima’s new armor piece covers up almost all of the front torso, hiding all the details that make the character look good. The bird tribes would naturally have wings, so it’s a pity that their armor covers up the details. This new armor’s shoulder pads look like some animal’s paws, which is pretty cool. Razcal with his weapon It looks like a bowgun-ish weapon, or maybe just a gun with horns on the side. It’s a nice little weapon for Razcal, albeit a bit too bulky. It’s decent that Chima sets have customized brick-built weapons, but they hinge on the side of awesomeness and downright ridiculousness. This one’s in between. Vehicles: Razcal’s copter A simple and small build, Razcal’s copter has this makeshift look to it, and it’s very Raven Tribe-like, not only necessarily because of its purple wings. The build of this vehicle is simple, but also interesting in some parts, like the way they built the flip-sided 1x2 plate to attach it to Razcal. Razcal attached to the copter So...Razcal’s minifigure is actually different from his previous set (70000), because in this set, his wings are attached to an additional 1x2 plate for ease of removal. His armor then fits to the copter securely, and it works nicely. Just one thing though…a raven that detaches his wings and uses a copter to fly…? The only explanation I can come up with is that he needs to fly at a faster speed, like Eglor with his jet. But a makeshift copter? The wings are pretty wobbly when you start spinning, and I doubt that a copter can catch up with a jet. Anyways, it’s a nice side addition to the set, but I feel like the designers could have done something more than this. Kids would surely grow tired of this tiny copter when they're aching for a more worthy enemy for Eglor's bike. Basic skeleton of the bike Bag 1 contains the basic build of the Twin Bike, with plenty of Technic parts used, much like other Chima sets. The turntable base is the main part used to transform the bike into a jet. Somewhat interesting Technic pieces This is somewhat interesting. I don’t play into Technic sets often, so having this yellow pin was new for me. After looking it up, it turns out that this almost never appears in normal LEGO sets other than serious Technic ones. It's probably used for motors or such...I don't know. Here though, it half-fits the grey piece and is used to hold the wheel in place to the basic skeleton of the bike. Base of the bike done Here’s the wheels and extra parts attached. The light blue ring looks great and even gives it that TRON look for some people, and I take it that it’s the Chi powering the wheels. Other side of the base The other side of the bike has been criticized by some to be…ugly, or not uniform to the bike’s blue wheels. I disagree for that fact that this is a transforming LEGO bike, and this side would be the underside of the jet. It makes sense, it looks fine and neat enough, so no complaints about that. The trans-blue piece extends to the back, giving it that Chi effect again. Pretty neat and consistent. Leftover parts from Bag 1 Some transparent pieces, technic pieces, a claw and a shaft. Nothing special here. Moving on to Bag 2! Contents of Bag 2 Right off the bat you can see that this contains the main body of the Twin Bike. The dark blue and white mixes well, along with the yellow beak standing out of the pile. Parts are well varied here, with a lot of engine parts, connectors and wings. Yes, more wings. Wings Aside from the orange wings from Razcal’s copter, we get two white and three blue wings, much like Eris’ Eagle Interceptor. Not a lot, but it’s still nice to have these since they're only released in Chima sets so far. The cockpit Following Chima’s well-known animal-like vehicles, the Twin Bike’s cockpit is in the shape of an eagle-head, and it's well done here as you can see. The sticker go to the head, and it looks cool, so I recommend putting it on if you don’t mind stickers. The cockpit then fits onto a stand to attach it to the rotating base of the bike. Completed bike base Here’s the base of the bike completed with the engines and two Chi crystals powering them fitted on it. It’s taking shape already, and it looks good with a rough technical/industrial feel to it. The claws are lifted up here to show the (simple) engines a bit clearer. Bike wings Here are the wings to the bike, with two stickers to each wing. The white and blue colors play off really well, and I love how the white wings are held in place using the binoculars at the tip of the plate. The Twin Bike Putting it all together, we get this awesome-looking bike. The claws on the bottom act as holders when the bike’s standing still, although you don’t really need it since it stands fine on its own (the wheels are large enough to support the entire build). This is surely something nice to display on your shelf. The other side of the Twin Bike And this…this isn’t really the part of the bike you want to display. It doesn’t look as sleek and cool as the other side, but it’s not cluttered enough to be off-putting. Extra parts from Bag 2 Only three small parts, since most of the bricks in bag 2 are large and unlikely to be lost. To the Jet Bike! : Transformation steps The transformation is really simple; just flip the wings up, twist the cockpit 90 degrees left/right depending on where it’s facing, flip it back, then extract the claws. And turn it over to get this: Jet mode A jet/hovercraft! It also looks cool in this mode, with the wheels acting as the jet’s engine, and it looks like it can hover too. There’s two circular trans-blue bases on the bottom of the bike that act as the jet’s thrusters when transformed, in case you’re wondering how this jet moves forward. It’s a really cool form, and it captures the Eagle tribe feel very well. Both modes are just amazing. Conclusion: Bike Mode Jet Mode And there you have it. Battle on ground, dogfight in the air. Which mode do you like better? The jet’s pretty cool to me. Price : 7/10 For the price…it’s fair enough, although the overall set feels lacking thanks to Razcal’s tiny copter. You’d feel like you could get a better land vehicle or small ATV to accompany the bike rather than having the copter. Keep in mind though that the only other way to get Eglor is from his Speedor set or the pricier and bigger Equila's Ultra Striker (70013). And with this set, you get an Eglor-centered vehicle and Razcal. Design : 8/10 Well, you gotta give props to the designer for fitting a jet and a bike into one build. The bike is cool to display, and so is the jet. Considering this is from the Chima Universe, it fits in perfectly well, and continues to show Chima’s strength with its animal-based vehicles. Razcal’s copter would probably just be put aside though. And one more thing - I wish the set name would be something other than 'Twin Bike'...what part of it is a twin bike??? "Eglor's Twin Jet Cycle" might sound cooler. Just sayin'... Play Value : 9/10 Hey, you practically get to play on two bases here – on air and on ground. It’s like having two separate sets. Kids will love the heck out of the transforming bike, but you’d better get a replacement for Razcal, because he’ll just be kicked out in the first five seconds using those jet lasers. Overall : 8/10 You get two great minifigures and a kickass bike/jet. The bike is a definite must-buy for Chima vehicle collectors, and it's a decent set for a gift to kids. As for parts, it’s good enough with the number of wings and a beak, but there are more technic parts in this set than normal bricks. Extra Pics (because why not?) : Calling the Eagle Tribe! Well, I don’t have all the eagle tribe members and vehicles, so this would have to do. But hey, Eglor’s bike seriously stands out, doesn’t it? There’s Equila with his speedor and Eris with her new armor from Worriz’s Combat Lair (70009). This will look amazing with her Eagle Interceptor. And now…for some extra shots of Eglor being well, Eglor… ...Because he looks like he’s an awesome biker. He has a Twin Bike, but can you imagine him in a real bike? Look how cool he is! Eglor as a specialist in a crack team of soldiers. Here’s him going on one of his missions. He’ll probably do something rad with that dynamite. Somebody make a movie out of him already, please. Okay, it's a lazy mix and match, and I just think Razcal would make a nice tough biker-gang figure in an alternate anthro meets Sons of Anarchy universe Thanks for reading!
-
REVIEW 70107 – ROYAL ROOST The King of Lions comes along for a Speedor ride. Theme: Legends of Chima Pieces: 105 Price: $14.99 / £9.99 Links: Bricklink / Brickset I can’t press how useful these Speedorz sets are for getting Chima minifigures the easier and cheaper way, and with this wave of sets, it has become much more obvious. Royal Roost presents us with Lagravis, king of the Lion Tribe, who is of course, quite an important character. Whenever you hear ‘king’, you’ll probably expect him to be an exclusive or at least a hard-to-get minifigure available only in a huge set. But here we can just get him for a mere $15, making it a sure deal for those who want him and does not want to get The Lion's Chi Temple (70010) Let’s get on with the review now. Packaging: Front side of the box Like all Speedorz sets, the packaging is compact, nice, and sturdy. Not to mention that it’s very disposable after you ripped it off and get the insides out There’s not much to say about this other than it looks good, especially the close-up of Lagravis’ head on the right side corner…he sure looks old Back side of the box It’s funny how the same two kids show up on the back of every box…Here you can see the small tower of the set; it plays and breaks up almost similarly to Winzar’s Ice Tower (70106) . Unboxing: Everything in the box The contents are the same as in any other Speedor set; there are the cards neatly packed in plastic, the building instructions, two packages of bricks, the ripcord and the Speedor itself. For Royal Roost, we get an additional white box containing Lagravis’ cape. The new minifigure sheet Here’s a look at the new minifigure sheet, which seems to be present in all of the new wave sets. Furty and Skinnet have the Lion Tribe emblem beside them if you look close enough. Sure they’re the allies of the lions, but are they part of the tribe? Don’t they have their own Fox and Skunk Tribe emblems? We can only wait until next year... Rules of the game The game doesn’t differ that much from Ice Tower (70106). The objective is to knock down the tower, and whoever catches the ball gets to draw a card first. If you’re looking for good games, it’s better to look at LEGO Games itself. But then again, this is aimed towards kids, who will no doubt enjoy letting the Speedorz loose and raising hell on the tower again and again. Laying down the cards One thing that’s awesome about these Speedorz sets are the cards. They’re beautifully drawn with great colors and eye-catching action. Just look at Lagravis being all badass! For all art-appreciating LEGO fans, this is surely a treat. Lagravis is seen holding all the weapons in the set too, and I can easily imagine kids playing with the Speedor and imitating these scenes. If only the TV series could be this cool… Contents: Freed from plastic packaging Right out of the packages, the one thing that immediately caught my eye is the colors of the bricks. You can quickly tell that the set belongs to the Lion Tribe. Chima sets do a really good job in making each tribe stand out with their own unique color themes. Bright, cheese yellow, brown and green; it’s easy to say that the tower’s gonna look lively. Lagravis’ mask comes in plastic, which is nice because considering the cramped packaging in a Speedor box. Quick look at cape and mask We’ll get to the minifigure later, but here’s a quick view of Lagravis’ cape and mask. The cape's shade of blue color is a very nice choice, and the mask...well, you’ll just have to wait till we get to the details (More or less) Interesting Pieces: Shiny! Translucent parts are canon in the Chima universe, as you can see with the abundance of Chi-colored (or translucent-blue if you prefer,) parts. With Royal Roost, you get some pearl gold ones too. The axe-head is a definite extra, useful for making more weapons. If for some reason you’re looking to collect Chi (those blue gem-like pieces), Speedor sets give them away as if TLG has a warehouse full of them, just waiting to get rid of the stock. Some misc. parts Bricks ahoy! Like, literal brick-like bricks. Ahem, that was confusing. There are only two of them, but it’s better than nothing. They add a nice detail to buildings. Then there’s the somewhat new inverted bracket (they appear a lot in Chima and new Star Wars sets), quite useful for those looking to build MOCs. The Speedor: Speedor armor and ‘engine’ Coming down to the core of the set itself, the Speedor, you can see that it’s quite different from the others. Lagravis’ Speedor is fancier due to the fact that it comes in pearl gold color instead of the usual yellow or orange that other lions have. The design is neat, and it feels like royalty too, much suited to King Lagravis, although I believe that the armor looks somewhat more eagle-like than lion-like. The wheel is the same as any other Speedor. Here it is in full glory: Lagravis’ claw-weaponized Speedor Like any Speedor, the armor is fixed with two black technic pegs, with the optional weapon attachable under it. Lagravis’ Speedor has a claw-like modification for its weapon. …But seriously, the more I look at it, the more it looks like an eagle. What do you think? The Minifigure: Hail Lagravis, old man! Now, on to the King himself, Lagravis looks great. Just look at him! Dark-blue cape flowing, bearded muzzle, muscled armor (?!) and a shiny crown. This has got to be one of my favorite minifigures…well, all the Chima minifigures look great, so it’s hard to choose, haha. Great price for the set to get this guy, remembering that he's only available in the largest and most expensive Chima set - The Lion Chi Temple (70010). Cape-less and naked Lagravis Lagravis is old, that’s what strikes you when you see his face without the mask. He has wrinkles, a gray bearded jaw and eye bags. But he looks wise, and you can tell a lot just looking at his face. The other side however shows an angry scowling lion. He’s probably mad at Laval again for some random mischief he did. The blue cape extends to the torso, although it looks like a scarf when the cape is off. The Chi medallion looks good, and so do the belt and armor. It’s all very Chima-detailed, and there isn’t much to say anymore other than it’s great. First time that a crown comes equipped with a hollow head and spiky hair… Here’s a full view of Lagravis’ mask and a close-up. You can see the details of his face, especially the crown and beard. The paint is superb, and there are no shaky lines or imbalanced color here. It really feels well-made and it's pretty much perfect. A King needs weapons As in the card images, Lagravis’ axe and knife are there in the set too. It looks royal, again, keeping up with the overall feel of the set, mostly thanks to the pearl gold, white and translucent-blue colors that complements each other very well. Being the boss And here is the King with one of his weapons, looking quite aggravated. Lagravis must’ve fought some crazy-big monster to get that tooth as a blade A King needs no driver, he drives himself! And there you go, Lagravis, his axe and the Speedor. Someday someone will make a diorama with Lagravis riding down the plains in his Speedor, leading a legion of other lions in their Speedorz, armed with spears and all. The Tower: The base Building the tower is relatively easy, and this base is made up of two similar parts, which of course means that some repetitive building is in store for you. Notice the greenish base and the grass that makes it look more jungle-like. Second and third layer For the top of the tower, you get a yellow structure and the ‘roost’ holding the ball. You could replace the pastic ball with a miniature bird or something, so as to make it a real roosting place Completed tower The structure is stacked together like the previously mentioned Ice Tower (70106), since it's meant to be knocked down by the Speedor. The translucent-blue is made to look like Chi flowing in the middle, and the base makes for a nice lush green ground effect. All in all, it’s a solid build. Extras In case you want to know, there’s some extras here. The typical studs and technic peg, along with some good weapon-builders. Conclusion: Everything built and ready... Price: 8/10 For $15, you get Lagravis and other neat things. As said before, the only other way to get Lagravis is through The Chi Temple, which is way more expensive to buy. Design: 7/10 The tower’s pleasing to the eye, and it really has that Lion Tribe vibe to it. No complaints here, although I believe most would break it down for parts after a while (I know I will). Playability: 7/10 It’s boring for adults, of course, but younger kids will like it. I’m not gonna be a critic for such a simple game, but you gotta admit, the Speedor is pretty fun to zoom around with for a while Final Score: 7/10 In conclusion, this set has got a little something for everyone. The play feature is good enough to be entertaining for young ones, there’s good art to be found in the cards, the tower looks nice, and there’s Lagravis. It’s a great set for a great price, and I recommend Chima-fans and collectors to get this set. As for those who’ve never bought Chima sets before, you can’t go wrong with Royal Roost. That's the end of the review Thanks for reading! ...but wait, there's more! A tribe meeting, and Laval is late. As usual. With this set, I finally completed all lion minifigures for now! And boy do they look great together. Leonidas and Lennox comes from Cragger's Command Ship (70006), while I got Laval and Longtooth from Laval’s Royal Fighter (70005). Three great sets, all minifigs complete. In other words, awesome! Here they are side-by-side: Brotherhood of the Lion~
-
Hello there! First off, I'd like to point out that this MOC is kind of non-canonical to the Chima universe, it is just a place and event that was invented by me for this MOC, it just so happens to be Chima-themed . And apologies in advance for the photography, I've never had to photograph an MOC this big before. Okay, now for the MOC and short backstory: When the Scorpions drank the Chi and became anthropogenic, they took over some Outlands Palace Ruins deep in a poisoned and desolate wasteland, devoid of the vegetation that usually dominated the Outlands. Mysterious and full of magical power, it has become the Chi store and ideal place to hold captured Legend Beasts for the Outlands tribes. Chima legend tells that the ruins are guarded by a ferocious Scorpion Legend Beast, and that the moats and lakes surrounding the ruins are rivers of pure venom. Nonetheless, the leaders of each non-Outlands Chima tribe, along with Lavertus, Rinona and the liberated Lion Legend Beast set out to the Palace Ruins to rescue the Crocodile Legend Beast and recover the stolen Chi... but little did they know that Scorm and his allies were already waiting for them. And so began the Scorpion Palace Ruins Raid... LEGO Chima - Scorpion Palace Ruins Raid 1 by TheOneVeyronian, on Flickr LEGO Chima - Scorpion Palace Ruins Raid 2 by TheOneVeyronian, on Flickr LEGO Chima - Scorpion Palace Ruins Raid 3 by TheOneVeyronian, on Flickr LEGO Chima - Scorpion Palace Ruins Raid 4 by TheOneVeyronian, on Flickr The legendary Scorpion Legend Beast lies atop the Ruins, observing the battle and waiting for a Scorpion to instruct it: LEGO Chima - Scorpion Palace Ruins Raid 5 by TheOneVeyronian, on Flickr Here's a top view. I admit I did run out of olive cheese slopes LEGO Chima - Scorpion Palace Ruins Raid 6 by TheOneVeyronian, on Flickr A scorpion head motif adorns the top of this man-made (or rather anthropogenic animal-made) waterfall: LEGO Chima - Scorpion Palace Ruins Raid 7 by TheOneVeyronian, on Flickr LEGO Chima - Scorpion Palace Ruins Raid 8 by TheOneVeyronian, on Flickr Sorry this one's a bit blurry, but it shows the inside of the palace ruins with the Chi store and the captured Legend Beast. LEGO Chima - Scorpion Palace Ruins Raid 9 by TheOneVeyronian, on Flickr Here's some more atmospheric shots with a change of lighting: Razar is firing his Chi beam here, but Scorm is firing his venom blaster back, turning the Chi beam into a fire beam: LEGO Chima - Scorpion Palace Ruins Raid 10 by TheOneVeyronian, on Flickr There's no denying that you wouldn't want to get punched by a gorilla wearing metal fists LEGO Chima - Scorpion Palace Ruins Raid 11 by TheOneVeyronian, on Flickr Scorm firing his venom blaster outside the entrance: LEGO Chima - Scorpion Palace Ruins Raid 12 by TheOneVeyronian, on Flickr This is what you see right above your head as you walk through the entrance. A jaw trap resembling a scorpion's or spider's mandibles. Looks like someone's already succumbed to it: LEGO Chima - Scorpion Palace Ruins Raid 13 by TheOneVeyronian, on Flickr LEGO Chima - Scorpion Palace Ruins Raid 14 by TheOneVeyronian, on Flickr And finally, Cragger engages Spinlyn at the entrance to her cavern (I admit I did attach a Spinlyn's Cavern to this MOC, and sorry, this one's a little blurry as well): LEGO Chima - Scorpion Palace Ruins Raid 15 by TheOneVeyronian, on Flickr If you would like to browse all the pictures at full resolution on Flickr (including a couple of pictures of the detached Scorpion Legend Beast), here's the link: https://flic.kr/s/aHsjXxCTwW Well, that's it for now. I would love some comments and constructive feedback on my largest MOC to date -
Hello all, and I hope it's okay to post this here. I am contributing my 1st review to Eurobricks, but I'm not new to review writing as I used to write set reviews for LEGO.com under the name "VeyronianHyperLady" and became a top 10 contributor over there. This review will be about the following set: 70146 Flying Phoenix Fire Temple, the flagship set from Chima's Fire vs. Ice wave of sets (Brickset entry | BrickLink entry). It retails for £89.99 (UK) or $119.99 (US), but does it deliver any bang for your buck? Read on and make up your own mind If you just want to look at the pictures, here's the Brickshelf gallery (it's a bit disorganised, but they're all there!) Firstly, the box. It sports the fiery banner at the top, like with the rest of the Ice/Fire Chima sets and features the beautiful artwork of the Phoenix Temple in it’s “Fire CHI Power Mode” as a phoenix flyer, while a sabertooth vehicle attacks the walls of the temple. I don’t understand why the vehicle can’t go through the obvious gap left by the temple and attack it from the inside . My box unfortunately came with a price sticker and was a bit water damaged from being left out in the rain by a courier , but it seems okay now. The back of the box shows all the functions of the set. Note that the Sabertooth vehicle can actually detach into two vehicles. The Minifigures are an immediate selling point to the set. Seven excellently detailed minifigures accompany the set, with six of them (counting Fluminox’s unique royal gown variant and Voom Voom’s trans-light blue heavy armour variant) being exclusive to this set, and the other being found in 2 other sets (at the time of writing). The set includes the Phoenixes Fluminox, Foltrax and Flinx, the tiger Tormak, the lioness Li’Ella, the Sabertooth Stealthor and the Vulture Voom Voom. Fluminox: Undoubtedly the star of the minifig selection, Fluminox, presumbaly king of the Phoenix tribe, appears here in his royal robes, using a printed slope instead of a pair of minifig legs (much like Ewald in this respect). The figure is printed with a beautifully intricate robe over feathers pattern, with golden fire motifs, a pendant, chains, dog-tags and a belt. Only the pendant is obscured by the armour Fluminox wears, which is a new mould cast with a little fire emblem by the front stud and some feathering detail on the shoulders. There are two studs at the back where the wings (new in orange) attach. The head itself is printed with a very similar pattern to the Eagle’s head pattern, with a stern face and a surprised face. The golden fire motifs continue onto the new phoenix helmet mould. All this combines to make a beautiful minifigure which will be absolutely essential for any Chima collection. Fluminox holds a Wingfurno, which a nice but rather uninteresting to look at weapon, but it does the job nicely. Flinx: Possibly the first Chima minifigure to have the short legs (corrected, it's the second, G'Loona was the first), Flinx is a small minifigure but still has plenty of detail, with a similar robes over feathers pattern, which the shoulder armour partly covers. Again his head is double sided, with a happy expression and a stern expression, with both sides conveying a rather youthful appearance. He uses the same headgear mould as Fluminox but with different printing. The youthful face, use of the small triple flames and the short legs suggest that he’s the baby of the Phoenix tribe, but this packs him with a lot of character. His weapon uses a new flame piece, like a lightsaber piece but with flame extensions down the middle and is marbled with trans-red and trans-yellow. Foltrax: Probably the least interesting of the Phoenixes, but still a nice and exclusive minifigure. Foltrax’s mix of red, dark red, orange, gold and dark bluish gray might not agree with everyone though, as Foltrax does look messy with all these colours. Unlike Flinx and Fluminox, Foltrax has an armour, fasteners and abs pattern, which is a very nice pattern sadly obscured by his heavy armour, however the armour is necessary for the wings to clip on. Foltrax’s head is quite similar to Fluminox’s, and could be easily mixed up, but luckily Foltrax and Fluminox come in different bags so, unless you mix all the bags up, putting the wrong head on the Phoenixes is very unlikely. His weapon is relatively standard fare, a Ninjago blade piece on a 4L bar, but does it’s job. Tormak: The first Tiger minifigure in Chima, whose headgear mould is the same as that of Li’Ella and 70141’s Lundor, which makes sense given that they are all based off the big cats. Tormak has some beautiful dark red/gold fire motif armour patterning, fur and muscle patterning on the torso, but this is covered by the heavy armour. Tormak’s head is double-sided, with a scowling face and an angry face, and his head is also printed with lots of tiger stripe patterning which, sadly, isn’t repeated to the same level of detail on the headpiece. The headpiece is strangely devoid of tiger stripe markings for the most part. I would say that Tormak suffers from lack of arm printing as well, he just doesn’t have as many stripes on him as a tiger should have. His weapon, a fire longbow of sorts, is perhaps one of the most elaborate weapons ever seen in an LEGO set, and looks very over the top, since it’s actually taller than Tormak itself. You have to tilt Tormak’s legs right back before he can even stand holding the weapon. The other problem with the headpiece is that, unlike many of the other Chima animal headpieces, it has a raised back. This wouldn’t be a problem if only Tormak’s head wasn’t double sided, since you can see the print of the reverse side show through, which is a shame. You can see how visible it is in this picture: Li’Ella: Finally, the Lion Tribe gets a female member added to the minifigure roster. Li’Ella has a dark red cloth print on her legs with the recurring gold flame motifs, and has some feminine upper armour printed on her torso, but again, this is covered by her shoulder armour. Again, she has a double sided head, one side with a smirk, one with a smile. The smirk is the face represented on her headpiece. If you look closely, her mouth is surrounded by lipstick. Not sure if this printing is necessary since she already sticks out as a female Lion amongst all the male Lions we already have, and, well, lipstick looks a bit strange on a lion I guess! Her weapon is pretty much recycled from the Eagle Tribe but with trans-orange round tiles on it instead. Stealthor: The only figure that isn’t a variant unique to this set, but still a nice figure nonetheless. This figure has some very intricate patterning depicting their partially decaying bodies. I suppose these ice zombies could have been in worse condition if they hadn’t been preserved in ice for 10,000 years (I don’t think calling them zombies is completely appropriate though, Stealthor looks much more intelligent and quick-witted than traditional zombies, but I suppose they’re already undead ). He sports some shoulder armour in trans-light blue, which I really like since you can still enjoy the printing in all it’s half decayed glory, which makes me wish the good guys had trans-orange armour (but maybe that was a Health and Safety nightmare for everyone? ). The patterning continues with the head, which is actually double sided unlike the Vultures. Stealthor’s two faces are both similar, one with narrow eyes, one with wider eyes. The head sculpt is different to that used on the Tiger and Lioness. The ice hand is Dark Azure in colour. Stealthor has an interesting weapon which uses two of the new claw pieces. Voom Voom: The other bad guy in the set. Once again, he has intricate printing depicting him wearing a tatty loincloth decoreated with bones, and showing the half-decaying body. He wears the heavy armour, which is trans-light blue so you can still see the printing. His head is just one-sided, with a cunning expression on his decaying face. I know vultures are scavengers, but it looks like Voom Voom scavenged himself at one point. The wings are new in Light Bluish Gray and he also has an ice leg. I do wish LEGO could have varied which leg is iced over on which figure though. Voom Voom wields a pair of ice axes. My only problem is why did they choose vultures if they were doing extinct prehistoric creatures thawed from the ice? Sabertooths and mammoths made sense, but vultures just didn’t as they’re still around? I guess I’m just being nitpicky because I studied ancient life as part of a degree at university New parts and recolours: There are a few new parts and recolours, including new parts 15092, 16770, 15107 and 16768, 13547, 43723, 43722 and 43719 in Dark Orange, 11091 in Dark Red, 11127 in Trans-Orange and Bionicle Zamor Spheres in both new marbled patterns (representing Fire and Ice), as well as a new 1x1 round tile print. Brickset’s inventory obtained from LEGO.com contains a full list of parts used in the set. Instructions: They are clear and well differentiated, though reddish brown and dark brown do look similar, but shouldn’t be a problem. Here's a random instruction image: The Build: The build itself is an entertaining 2 ½ or so hours without too much repetition, but do be aware that the build is seemingly more Technic than System, which if you didn’t know about it’s function, you’d think that it was a strange choice to build a temple out of Technic. If you don’t like stickers, be aware that this set contains over 20 of them to apply, and some of them aren’t easy to get straight. There was one tiny sticker that was especially bad, but more on that later. Unfortunately I didn’t take pictures of the build after each bag since I decided to review it after I built it all, so you’ll have to make do with my descriptions. Bag 1 builds Stealthor and Voom Voom, as well as the base of the sabertooth vehicle. You start the vehicle’s clawing mechanism here, but you don’t finish it until Bag 2. Bag 2 builds the claws for the clawing mechanism and assembles the detachable air vehicle. You then move onto Booklet 2 and bag 3, where you assemble Tormak, Li’Ella and Foltrax, as well as build the temple gates. Bag 4 extends on the temple gates, adding the two rather thin walls, and also assembles the “pool of fireballs”. Bag 5 builds Flinx and Fluminox and starts construction of the base of the center of the Phoenix Temple, including building the bomb dropping function. Onto Booklet 3, and bag 6 adds the Phoenix claws that also act as flaming torches, and finishes off the bomb dropping function. Bag 7 finishes off the centre of the phoenix and you can then see the mechanism that allows it to transform into a phoenix flyer. Bag 8 builds the walls of the temple/wings of the phoenix flyer. Bag 9 finishes the build off by adding the engines and shooter turrets to the ends of the walls built in Bag 8. The finished model: Here is the finished Saber-Tooth vehicle: Side-on view. Not it's best angle I don't think, but here you can see it's aggressive forward tilt. Back view. Front view. From this angle it really does look quite a beast of a machine. Activating the clawing function is easy, you just push a rod that sticks out of the back until it stops, then let go, then start all over again in a reciprocating motion. This is achieved by slope bricks mounted on a modified plate with axle hole, attached to the vehicle with frictionless pins, as well as a rubber band. The motion works very smoothly for the most part. Here you can see the detached air vehicle and what the base looks like without the top. The wings are built with hinges and can fold in and out, but I think I prefer the two attached. Note that these actually sit loosely on top of one another, so don't go rolling the vehicle over your ceiling Stealthor sits in his new toy. It's quite a snug fit. Note the canopy is double hinged. Now onto the temple: The complete temple is quite sizeable and works quite well as a temple, though the lack of entrance into the phoenix itself may be a bit puzzling. The bley stickered part in the centre is where you can load the zamor spheres for a function you can use in phoenix mode. Plan view: Here's the walls with the phoenix part detached. Note the trans-red circles - the phoenix slots into them when docked. The phoenix actually sits completely loose, so be careful when moving the temple as a unit. The wall section is also the most fragile part of the build, which doesn't help with transporting it. The Phoenix in Temple Mode, detached from the wall section, front view: Back view of the Temple Mode. The back central section is sparse and full of Technic, but with good reason. You can pick the temple up by the back and push the section where my thumb is to begin the transformation from temple to phoenix: The temple in Phoenix mode ("Fire CHI mode", but Phoenix mode is easier to say I think ), a front view: A plan view of the Phoenix in Phoenix mode: The Temple gains another entertaining function in Phoenix Mode. Push the pin where my thumb is in the picture and make the Phoenix drop Zamor spheres as bombs. Bottom of the Temple in Phoenix Mode. Not much to see here I suppose, but you can see the hole where the Zamors drop out when you push the pin in the previous picture. Here you can see the shooter turrets are not very moveable, but they are counterweighted. If there are no minifigs in them, they droop like in the picture, but they level out when a minifig is placed in command. A bit of a close up of the Phoenix, back in Temple mode. The sticker on the black tile is nigh-on impossible to position correctly Fluminox can stand in the head of the Phoenix quite well, though how on Earth is he supposed to pilot it if he's sitting so far away from the controls? As said earlier, the shooter turrets level out when a minifig is placed in them: This is the so-called "Pool of Fireballs", although simple, it looks very nice and compliments the Temple quite nicely when you position it in the middle. And finally, here's a shot of the whole set contents: So, in summary, this is a set that's worthy of being a flagship model in every way. It is a decent and interesting build if you don't mind building with a bit of Technic (I understand why this got a 9-14 age rating after I built it ), it really is excellent value for money, in the UK this is a whole £10 cheaper than the similarly sized 70010 The Lion CHI Temple, the Chima flagship set from last year, and boasts 1,301 parts compared to last year's Chima flagship set which only contained 1,258 parts, so on a price per piece basis, the Flying Phoenix Fire Temple is excellent value for money, especially if picked up on sale. I love all the interesting new recolours in the set, especially those marbled Zamor Spheres, and, best of all, surely it's the world's first swooshable temple? Young kids will need good strength to swoosh it, the phoenix part weighs about 650 grams, but no problem for AFOL's. It's best swooshed with one hand on the back, thumb by the bomb dropping mechanism. Now for the ratings: Set design/aesthetics: 9/10 - This set is very well designed, especially the phoenix. It's clever in construction and looks good whatever mode it's in. Points are only lost on how the saber-tooth's vehicle looks in two vehicle mode. Parts: 8/10 - Plenty of new and especially recoloured parts to keep new part aficionados like me happy, but for it to be a viable parts pack you'll have to deal with significant amounts of both System and Technic, which may put some people off. Minifigs: 9/10 - They're excellent as always, though I think Tormak's lack of stripes and the fact you can see his reverse head print at the back with his mask on is a little disappointing. Playability: 10/10 - it's fun to transform the temple into a phoenix and drop a few bombs on unsuspecting ice zombies. The addition of a substantial bad guy vehicle is also great. Value for money: 10/10 - A pleasing PPP ratio to me in the UK, and there is much fun to be had with this set. Worth every penny I paid for the set. Overall: 46/50 - an excellent set, definitely recommended if you have enough LEGO budget remaining, and even better if you find it on sale Thankyou very much for reading my review! Thoughts on the set are welcome since I can't add a poll quite yet EDIT: Changed picture location from Flickr to Brickshelf.
-
NOTE: I've just noticed that the title states the number of Cragger's Fire Striker and not Sir Fangar's Saber Tooth Walker, can someone change it to 70143 please? Hello, and welcome to another of my pictorial reviews! For this review, I decided to pick set 70143 Sir Fangar's Saber Tooth Walker (or Sabre-Tooth, whatever your preference ) (Brickset entry | BrickLink entry). The set retails for £34.99 (UK) or $39.99 (US), and contains 415 pieces. But is this set cool or does it send chills down your spine? Read on and make up your own mind Would you prefer to just let the pictures do the talking? Brickshelf gallery First up, the box. It has the same fire-themed banner as all the other Chima Ice/Fire sets, contrasting with Sir Fangar's icy mugshot in the corner and the generally cool colours of the background. Gorzan breaks out of an icy prison while Stealthor rides a cool chopper. The star of the set however just stands there while Sir Fangar (I'll refer to him as just Fangar for the rest of the review) fires flick missiles at Gorzan from the walker's enormous flanks. The back fo the box shows the various functions of the set, as well as a nice action shot of a trapped Gorzan while Fangar and Stealthor get away with the CHI. Funnily enough, they show the moving jaw as a feature but not the more obvious moving legs. Other features include the chopper trike storage and deployment and the obligatory flick missiles. Three Minifigures accompany this mid-sized set: Gorzan in his new fiery garb, Stealthor and Sir Fangar. None of them are exclusive to this set, Stealthor also appears in the Flying Phoenix Fire Temple, and Gorzan and Fangar both appear in the limited retail set Sir Fangar's Ice Fortress, but this is the cheapest way to obtain all three minifigures, including Fangar with his full bad guy garb (a version of Fangar without the cape or armour also appears in the Speedorz set Fire vs Ice). Fangar: This is likely the reason that many would pick up this set, so you can obtain a fully equipped (armour, cape) Fangar, leader of the Sabertooth Tiger tribe. This is an extremely detailed figure, with Fangar boasting copper and grey body armour printing, including a beautiful sabertooth tiger head pattern with the Chi orb mount in it's mouth. Unfortunattely it seems like my torso and legs don't match up exactly with each other, but I can just about live with that. Unlike many of his cronies, Fangar doesn't show a great deal of decay printing, most of it is on his head. His head features a lot of scarring and it looks like the Sabertooths discovered how to use copper plates to patch themselves up. The copper patch isn't reprinted on the headgear so it does make his right eye look a little odd, but I personally like that. The trans-light blue armour lets you enjoy the printing while still bulking out the minifigure. Fangar wields an enormous fang blade of sorts, which uses a white lightsaber hilt, a relatively rare part. The cape is the same as 2013 Cragger's, but cut from white fabric, a new colour for this cape. Stealthor: I've already talked in extensive detail about this Minifigure, so rather than repeat myself I refer you to my description on my Flying Phoenix Fire Temple review. Stealthor gets a new weapon here, a sort of CHI-powered ice gun which utilises a brand new paw piece. Gorzan: The protagonist of the set gets an update from his previous Outlands version, sporting not only some new clothes but also a new headgear expression, which no doubt adds some variety. His headgear gets a more neutral expression this time around compared to the traditional open mouth headgear, with a more concentrated / determined expression. The torso and legs receive some gold and dark red armour plating pattern, with the torso getting some Phoenix patterns presumably to show the Gorilla's alliance with the Phoenixes. It's a beautiful but generic print, I just wish that Gorzan got some gorilla motif kneepads (like how Cragger and Laval got their tribe motif kneepads on their fire suit versions), this would have helped Gorzan get some more individuality and connection to his tribe.Gorzan has a very elaborate fire hammer which makes use of the new fire piece. This does make the hammer much taller than Gorzan himself though, but I suppose more leverage means more damage, right? New parts and recolours: Plenty of wonderful new parts and recolours are present in the set, presumably to try and justify the price tag in part I guess! New parts include 16768, 15090, 15091 and 16770, as well as a multitude of unique recolours. Trans-Light Blue recolours include 32348 and 48169, and Dark Orange recolours include 98585, 13547, 93606, 47456, 43723, 43722 and 2450. Brickset's inventory obtained from LEGO.com lists all the parts present. Instructions: Clear and easy to follow, and follow a similar format to all recent sets. Dark Brown is diffrentiated from Black by white borders around Black parts. Here's the obligatory random instruction image: The build is decent, with Technic mixed in with system to keep it interesting, although the legs and armour flanks are fairly repetitive. A competent builder can have this built in about half an hour to 45 minutes. There are 4 bags and also a DSS with a few difficult to apply stickers, they are mostly either small stickers going on large parts or stickers that apply to awkward edges such as the angled, sloped edge of the 6x2 wedge shell, so be aware of that. Bag 1 builds the Minifigures, a small patch of land with the lovely icecage piece and the Sabertooth chopper trike. Stealthor's weapon can also attach onto the front of the trike, which you'll see a bit later. So here's the contents of Bag 1 (all pictures exclude spares): Bag 2 builds the body of the Sabertooth Walker. The gears are part of the chopper trike launcher mechanism. Looking promising so far: Bag 3 adds the legs. This is the most repetitive part of the build. The trans-light blue liftarms look really nice here Bag 4 builds the head and shoulder armour where the flick fire missiles are mounted. And it's finished! The finished model: The piece of land. This literally uses just 3 parts, yet it does what it's supposed to. Gorzan models his icy prison for us: The icecage piece is open at the back. Probably not it's best view to be honest... The Chopper Trike. Here I've attached Stealthor's weapon to the front. The Trike is simple but I really like it, I think it's cool (I promise I'll stop the ice puns! ) Stealthor: "Hey, check out my cool ride!" The Sabertooth Walker. From the front, it's an imposing beast of a machine and by far it's best angle. It really does look menacing. Side view: Not really it's prettiest side to be honest. The front looks brilliantly executed, but as soon as you reach the rear section, it kind of looks lazily designed. You can see where the chopper trike mounts on the walker here, but to be honest, it's far too sparse around the belly area. It tries to emulate the curvy hips that big cats usually have, but since there's only Technic bricks here, it just looks half finished. Back view: Marginally a better view than the side view, but still looks a bit unfinished here too: The Walker exhibits some asymmetry, with cogs on one side and this Technic liftarm I'm pointing to on the other side. Pulling this liftarm down releases the trike. Unfortunately this function does not always go smoothly, you are supposed to pull the lever down and the trike will slide out of the bottom of the Walker and roll along the floor, but more often than not the trike will get wedged on the Walker upon exit, or not roll off the platform smoothly so that the trike sticks after the front wheel touches the ground. I did take a picture of it, but my camera decided not to save it unfortunately. Here are a couple of shots of the Saber Tooth Walker without the trike on the back. Without it, the sparseness seems to be exaggerated even more and the Walker's back goes very flat. The Walker's legs are very flexible and sturdy and allow for some quite cool and threatening poses. But this leaves me wishing that the head had some movement as well, as the huge, static head limits the posing possibility. Fangar has to stand to pilot the Walker. His ice leg better be of good quality And finally, a shot of the contents of the entire set: So, in summary: I wanted to fall in love with this set, I love saber tooth tigers, but somehow this set just left me feeling a little cold. The Minifigures are amazing and the design of the front is beautiful, but all of that is let down by the sparse rear end and flawed trike launching mechanism. The platform the trike stands on also tends to droop under the trike's small weight despite the gears trying desperately to provide enough friction to make the platform stay, and this results in unintentional trike launches without you doing anything at all. It has lots of exclusive and rare recolours in decent quantity, so it's great for the parts aficionados. Now for the ratings: Set design / asethetics: 6/10 - I might have even been a bit generous here, but a beautifully designed front end coupled with a lazily designed rear end and flawed mechanism does not make for a top-notch model. Even an attempt to hide the gears or Technic frame would have been welcomed. Parts: 8/10 - Trans-light blue liftarms and a whole host of new parts to add to the Dark orange library? Plus 11 of the trans-light blue Hero Factory claws? Yes please. Minifigs: 9.5/10 - Almost can't be faulted. Gorzan's lack of individuality on his fire suit is my only niggle. Playability: 5/10 - It's fun to pose the limbs, but lack of moving head may be frustrating. The flawed mechanism may also frustrate. I would have also liked a little vehicle for Gorzan, the odds seem to be stacked heavily against him Value for money - 6.5/10: It's a sizeable model despite it being quite spartan at the back. The minifigs and exclusive recolours help soften the blow a little. Overall: 35/50 - I would avoid this set at full price - wait for a sale. If you want a caped Fangar and fire suit Gorzan, you may want to consider the Ice Fortress instead of this. Not completely recommended at full price, but if you value minifigs and parts well over asethetics and playability, go for it Thanks for reading my review. I wouldn't mind a mod adding a poll for me, but for now, may you share your thoughts on the set in writing EDIT: Changed location of pictures from Flickr to Brickshelf.
-
I was a little bit bored today, so I ended up adapting the new-style Speedorz I had into these, which I'm actually quite pleased with: Which then, with a little help from the power of Chi hands, turn into these little fellows: Note that these wouldn't have been possible with the old-style Speedorz, the old styles have too few connection points to be able to accommodate all the extra appendages securely. And believe it or not, these still function perfectly well as Speedorz, albeit they run a lot slower. I was going to put claws on the feet, but I seem to have convieniently misplaced all my T-pieces, so here the feet are just plain. I really want to try this with the rest of the new Speedorz, but I only have these two at the moment. Hope you like my unique reinvention of the Speedorz!
-
It's been a while since I posted my last set MOD, but I got round to photographing another of my MODded sets - CHI Mungus! It's actually a MOD of the Mungus-Fangar (Mungus dominant) combiner, but with many extra MOD's. Hopefully you'll have the time to look at it and appreciate it, what with the news that Bionicle is back and all that Anyway, without further ado, here's some pics: Front (I should point out the exposed red axle is for when you want to pose the figure with the weapon in both hands - maybe I should have used a black one): LEGO Chima - CHI Mungus MOD (1) by TheOneVeyronian, on Flickr Side: LEGO Chima - CHI Mungus MOD (2) by TheOneVeyronian, on Flickr Back: LEGO Chima - CHI Mungus MOD (3) by TheOneVeyronian, on Flickr Pose 1: LEGO Chima - CHI Mungus MOD (4) by TheOneVeyronian, on Flickr Pose 2: LEGO Chima - CHI Mungus MOD (5) by TheOneVeyronian, on Flickr That's all right now. Hopefully I'll be back soon with some more set MODs for you, but for now, hope you enjoyed this one Extra pics available on request.
