macsergey

Hello. How get raw value from color sensor? trigger value 5 is not suitable. I calculated the values for determining the blue and black color that I can set in the Powered Up application, but this is not possible here. Using C# reflection I find event "ColorTriggered" on Hub type, but it send result color. I find private field Characteristic - Windows.Devices.Bluetooth.GenericAttributeProfile.GattCharacteristic has event "ValueChanged", if i got it right here can get raw color value, but subscribe to this event imposible becouse dont using Windows.Devices namespace.

Hello, is it possible to get the source code?

Hello. I want to show you the bus stop. The basis is taken of a new Moscow stop, which is installed from 2015. The stop is made in a modern style. Main materials: glass, metal and wood As has long happened in Moscow, on the sidewalk is a tile Near the stop is an information board, on the screen which shows the time before the arrival of transport, as well as a traffic pattern On the roof of the stop there is a solar panel for supplying electricity and an antenna for transmitting data to the information board Near the stop, there is also a flower bed with plants Bus stop with minifigures the bus arrived Thank you for attention. More photos of this and other works can be viewed in my Flickr

Hi everyone. I want to show you the model of the intercity bus LiAZ 5251 in the coloring «Nashe Podmoskovie (our Moscow region)» A few words about the original. The bus is produced at the Likinsky bus plant near Moscow since 2014. The model is designed for routes over 500 km. The bus is built on Scania chassis. The bus is made in the minifigures scale. 8 pins in width and 42 in length The model is made in the brand coloring «our Moscow region» The characteristic features of this color: the main white color, with some details of dark gray and yellow stripe in the middle. Behind the windshield is a route Board Also in the back The bus is equipped with air conditioning system, as well as emergency exit hatches on the roof The model has several functions: 1. Opening the front door 2. Opening rear door 3. Opening Luggage compartments on both sides 4. Opening service and engine compartments 5. In the engine compartment is the engine model All functions together Also the model is easily removed the roof, opening access to the passenger compartment Thank you for listening. You can see more photos in my gallery on Flickrhttps://www.flickr.com/photos/macsergey/albums/72157699203540304

Hello. The basis was taken photos of the real modification of Volkswagen for fire needs. That's what I got out of this. 0. Photo of the prototype. 1. General view of the model. 2. Side view. 3. Since there are a lot of people in the fire department, the car's cabin is double. It contains 4 minifigures. 4. Behind the cab is a body with fire equipment. 5. The body has 3 compartments: 2 on the sides and one on the back. 6. On the roof of the body is transported a ladder, and also there are searchlights. 7. On the roof of the cabin, as expected, are flashing lights and a beep. 8. Nearer 9. We now turn to functions. The model opens all 4 doors of the cabin. 10. Imitation of the seat. 11. We pass to the body. The door of the rear compartment rises. 12. There is a pump. 13. In the right compartment there are fire-fighting suits. 14. And in the left helmets and a generator. 15. The generator is separate. 16. Ready to go. 17. The whole team is assembled. 18. In firefighting suits. Thank you all for viewing, I will wait for your comments.

Hello. The basis was taken the car VolksWagen Crafter. That's what came out of it 1. The model is made according to the drawings of a real car. Keeping all proportions, as far as it allows you to make Lego. 2. In the cockpit, a width of 6 pins, fits 2 minifigures DSC_6182 by Сергей Антохин, on Flickr 3. Platform length sufficient to fit her SUV 4. The winch is mounted on platform 5. 6. With Outlook can finish and go to functions. 7. The platform is fully functional 8. Before raising the platform, lower the support. They, too, not just props, and do not really give the car to lean back. 9. After lifting, the platform retracts 10. Hydraulic pistons lifting platform. 11. You can begin the evacuation. The car picks up the winch. 12. And dragged onto the platform. 13. After that, the platform rises up and down. 14. Loading is complete. 15. The model has opened the door. 16. 17. Compare the size minifigures and a tow truck. The driver next to the tow truck. 18. Thank you all for watching, I'll wait for your comments.

Sorry, accidentally published a without translation to English

Hello. A few days ago I became the owner of a set of 60145 As you can see, the model of a set of a chur huge for minifigures, wheels almost to its growth. This can not be tolerated, I thought, and began to construct a scale buggy minifigures and this is what came of it. 1. 2. On a general view, a model similar to the one in the set. 3. Wheels with several times less and it seems to me, in real minifigures. 4. Greetings from the 90's. The model uses the old part with springs, which makes a real car suspension. 5.Behind, as expected, it is the engine. 6. Safety frame saves the driver from injury in the event of a coup buggy that is not enough rare when driving on the dunes 7. 8. 9. Front view grin and fearless conqueror of desert 10. Thank you all for watching, I'll wait for your comments.

I present my MOC, "Country Life" 1. On the plate 16x16 is a piece of the field, the old barn and the farmers. 2. Almost half occupies an old barn, the wall and roof which climbs eel. 3. A rear, under the roof, weighs wasp hive. 4. It occupies the other half of the field, which processes the farmer. 5. Scarecrow guarding the field against intruders. 6. A farmer carries a shovel from the shed and a bucket which he filled from a barrel. 7. Farmer planting seeds 8. On the roof sits a raven, which can not be solved on the fly. 9. Eel with pink flowers on the wall of the barn. 10. Barrel with water. 11. Thanks for watching

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

1. 2. 3. 4. 5. 6. 7.

Hello. I want to show my model sportcar Lamborghini Miura. This car was produced from 1966 to 1973 and only 764 copies were built. 1. 2. 3. 4. 5. 6. 7. 8. 9. The model opened the door. And because of the very small height of the body in the model does not fit minifigures, only the head of it. 10. 11. More photo on my flickr gallery https://www.flickr.com/photos/macsergey/ Thanks for watching, waiting for your comments.

2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.

Thanks. Scale is one stud = 30cm It is this detail http://www.bricklink.com/v2/catalog/catalogitem.page?P=132old#T=C

Hello. I want to show you my MOC Volvo milk tank 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. Thank you for watching. I am waiting for your comments.

Scale is 1:37,5. One pin is real 30sm

Hello everyone, I want to introduce my little MOC: ATV .

Thank you all for your feedback. Please support me on Lego ideas https://ideas.lego.com/projects/130024

Hello. I want to introduce you to the new model: Helicopter Mi-171 (modification MI-8). The model is made to scale minifigures and all its dimensions and proportions as close as possible to this helicopter. I decided to make a civil cargo modification that can be easily completed yet in the passenger version. original photo review model photo in more detail Some functions of the model minifigures in the cockpit I welcome your comments and feedback.

Thank you all for your feedback on my model, I'm glad you liked it I can lay out later model made in LDD you mean lego ideas? no, it's entirely my design, inspired by a set of 60070

Hello everyone. I want to introduce you to my first plane. https://ideas.lego.com/projects/95723 The plane is a small single-engine propeller floatplane. in fact it is a regular plane, but which instead chassis fastened 2 float for takeoff / landing on water. Before that, I did only motor vehicles and of little buildings. To create his inspired me a new set of 2015 60070 Water Plane Chase from which you can notice, I borrowed some features of the aircraft, but made it more real, and not as a toy in the set. Some definite no real prototype, but it seems to me, it looks like a de havilland canada dhc-2, although the size, if we take the scale of 1/40, my is a bit smaller. My model is the size of a hair's breadth a Cessna 172, but the form is clearly different. so that in general a collective image. We now turn to the model and first-round visibility. The plane is white with orange stripes. back view We have wings props. I note that they are located not only at an angle, and even diagonally. The model fits one minifigures top view Now tell you a little about the functionality of the model. The cab doors open on both sides, that we could go to the pier from different sides Also, the aircraft has a small storage compartment in the rear, which is also open on both sides. It is possible to make modifications where his place will be a place for another 1-2 minifigures The pilot gets out of the cab to the pier Something gets out of the luggage compartment And finally, several artistic photo Thank you all for viewing, I'll wait for your feedback and comments.

Hello everyone, I want to show you another modification of my model SUV Nissan Navara, this time the whole body and it is a police car. Encouraged me to create this car one of the sets of Lego (a little further you will understand what), but since it looks pretty awkward, I wanted to create his own version. This model has 4 doors and it is placed on 4 minifigures Front is also located Bullbar, as well as flashing beacons Since this is a police car, the roof is flasher The rear seats represent a place for transportation of detainees and separated from the police bars Car rear trunk All the doors of the car open Just open the trunk and A surprise in the trunk. There are 2 travel buddy cops. explains that based on what set was assembled this SUV - 60048 And here is the police with his car And now a small sketch The robber tries to open an ATM on the street His passing police notice and immediately take the case. The offender caught! And being in the car Went to the police station to register the case And finally, with all police shot against the background of his car Thank you all for viewing, comment, rate.

Hello everyone. I would like to present a model SUV Nissan Navara. The front of the car is Bullbar On the roof are extra lights The model can fit 2 minifigures, open doors Just open the trunk And it is the owner of the Nissan hunky Fred Body pickups quite roomy, so many boards and boxes it is appropriate Fred Brought, and now need to unload A little more Fred except vehicle has a trailer (which would see an overview of the trailer that click here) in which he lives and which he carries with his Nissan Comparison of the size of the car and trailer I hope you enjoyed my model Nissan Navara, I will be glad to hear your feedback and comments.

Hello everyone, I want to show you my new MOC Travel Trailer To begin with all-round visibility And now let's get acquainted with the owner of the trailer. Cheerful worker, rolling around all over the country from one job to another in his trailer. Call it, say, Fred. Fred was kind enough to show us what's inside the trailer we remove the cover from the trailer, it is easy to do On the wall we see the clock, newspaper clippings, flower In the trailer has gone in quite a large bed, wardrobe, red refrigerator and a small table for eating On the other side of the table with a computer, basically has everything you need for life Fred decided to take a nap Now Fred wanted to show you something that you obviously have not noticed At the rear of the trailer is the trunk in which Fred keeps his tools and other things empty trunk That's all, I hope you enjoyed my model trailer. Evaluate, comment, share your opinion about my work.

Hello. I want to show you flatbed truck with crane manipulator 01 by MacSergey, on Flickr To begin with all-round visibility 02 by MacSergey, on Flickr 03 by MacSergey, on Flickr 05 by MacSergey, on Flickr 06 by MacSergey, on Flickr 07 by MacSergey, on Flickr 08 by MacSergey, on Flickr 09 by MacSergey, on Flickr 10 by MacSergey, on Flickr 12 by MacSergey, on Flickr 13 by MacSergey, on Flickr 14 by MacSergey, on Flickr 17 by MacSergey, on Flickr 18 by MacSergey, on Flickr 19 by MacSergey, on Flickr 20 by MacSergey, on Flickr We now turn to the functional. doors open 15 by MacSergey, on Flickr 16 by MacSergey, on Flickr board recline 21 by MacSergey, on Flickr 22 by MacSergey, on Flickr 23 by MacSergey, on Flickr We now turn to the manipulator. This remote management 24 by MacSergey, on Flickr First put forward support 25 by MacSergey, on Flickr 26 by MacSergey, on Flickr 27 by MacSergey, on Flickr 28 by MacSergey, on Flickr function crane manipulator 29 by MacSergey, on Flickr 30 by MacSergey, on Flickr 31 by MacSergey, on Flickr Now a small scene brought bricks 32 by MacSergey, on Flickr Guys, we unload now! 33 by MacSergey, on Flickr 34 by MacSergey, on Flickr 35 by MacSergey, on Flickr 36 by MacSergey, on Flickr 37 by MacSergey, on Flickr 38 by MacSergey, on Flickr 39 by MacSergey, on Flickr Thank you all for watching, I will wait for your comments and feedback