WhiteFang

Congratulations. You guys truly deserved it.

Brilliant. Simply brilliant. I will love to see a medieval faction known as "Penguins". You make it sounds like the "March of the Penguins". Good luck.

Thank you LuxorV. Glad to help to share my thoughts with this very new products. Yea! I find that, by placing a poll will make it interesting to find out what are their interest. For myself, it was definitely the Assassin. Medieval stuff works well for me. Thanks K-nut. I am glad you had enjoyed it. The scimitar was my favourite weapon among the lot and I am impressed with the quality too.

So far, I have looked through of the entries. For those, whose entries have poor photography, I strongly urge you to retake a better one. You are strongly encouraged to do so. For those who have "my edited remarks below", you are to follow based on what I had asked or your entry will be disqualified. For those who don't have any comments, it means your entries are good to go!

Yes, and there must be a minimum of one original LEGO Collectable Minifigures in there except Series 5.

I understand that you signed up today. Basically, you can participate in both categories. Just that, you can't vote later on. That's all.

Can you please indicate the duration of the survey by quantifying the amount of questions in numerals. To indicate a 20 minutes long, doesn't give a good indication of the actual survey overview, especially when there is no overview of the layout to begin with. This is not to taunt interested participants away.

AHHHHH, I am finally glad this game is over! I am not good in playing scum but it was a pleasant sweet surprise to note my scummy teammates and I had won this game! Lots of discussion was done in private and I can felt it through my teammates. I didn't interact much in the game, especially in private. I hate to manipulate and cheat the feelings of others, which is why, I refrain myself from approaching others in private as much as I can. However, I do have a fail safe mechanism as my character profile is unique from others, is I am the only person upon investigation will provide a townie results from all investigations. So, the only way to pin me down was through conviction. The entire game was largely planned out, especially the first 3 days, who is mainly lead by Hinck, then after Hinck's death and Rufus & Pandora straight conviction of the other 2 of our teammates, we got to device another plan that was coordinated by Shadows. What can I ask, who can ever expect the 3 of us, plus Draggy and iamded and Jimbee to be on the same team. Lots of decisions were painful and we had a hard time debating on what we can do to eliminate those growing threats. It was a great game, and for all who realises, I am sure Rufus & Pandora have already noted of the no-killing of Day 3. Sorry, I lied about my protection and lying is not my forte. It was very obvious that a conversion is definitely expected. I was even thinking of other more bizarre roles such as the "usurper". Still, let's not bring the grudges to another new game. It is always hard not to metagame but please try not to. More thoughts later on.

Some people also shared some findings with me in private and I, too also believes it is true. I will vote first in case I can't get back in time. For now, this is my decision. Vote: Rickety Cannon (Roncanator)

Yes.

Hello everyone, It has been a great pleasure to be given such rare opportunity to share my thoughts and views on this very new Minifigures Customisation Manufacturer known as the, BrickWarriors. All thanks to the founder, Ryan (Eurobricks member: Thrash) for making this possible. Without further ado, let me share some of his main highlights and how I make use of his new customisation elements into my wide array of LEGO Minifigures collection. The Medieval Assassin Firstly, let me present my fearless medieval assassin that dealt with renegades that had betrayed their country. You can count on him to do his job. Apparently, no fear seems to work well for this armoured looking masked assassin when he is wielding the long scimitar and dagger in both hands and donning his mask and horned plate armour together. Here is a closer look of the highlighted weapons, I find the scimitar pretty taunting and sturdy with the slight curve on the upper blade. In fact, it can be widely used in various types of solders' configurations. One of the nicer details of the dagger is the grip of the handle which can be seen clearly from the picture. As for the headgear and armour which you can see from here, these customised parts fit well in any standard LEGO minifigures. The horns on the shoulders are some nice little touch which made it more detailed than a regular looking armour. The fierce Minotaur Hold it right there! Now right at the front, there is a fierce looking Minotaur guarding the tomb. It also means we got to fight the way through. Oh well, we don't have much combat experience with such mythical legendary creatures, but all I knows that Minotaur is famous for their foul and nasty temper. I am actually very pleased to see a customised design of the Minotaur. It is very good to see more new fantasy medieval elements being introduced. Oh well, please don't quote me, but I "think" we might have a similar concept coming in 2012 which will also be readily to be introduced in the LEGO Collectable Minifigures Series 6. Too bad, I don't have much resources to make a steady comparison yet. The facial features are very distinct and you won't have a hard time to identify a Minotaur from far. Do note that the udder horns are official LEGO parts elements that are incorporated at the side of the headpiece. Not sure how many of you out there have tried playing with the Minotaur's headpiece, personally I find it hard to push it in slightly and pulling it out at times. It would be the results of the tight grip within the headpiece, so you won't see the headpiece dropping at times. This is an image of the headpiece without attaching it to the minifigure. As for the long double axe, it is definitely fitting. It looks heavy and appears to require great strength to wield it. The blades of the axe are some of the nicer details in this design. You can take a better look of the side of the axe. The brave Heavy-Armoured Trooper This resistance trooper is marching his way to the success of the revolution. With supreme well protected equipment and heavy offensive weapons arsenal by his side, victory is just moments away. I must admit that I grouped these four customised elements together and I can see it was meant to complement one another. Both the assault and battle rifle are packed with tons of details. As a matter of fact, I can't believe there are so much design features that is shown in these two weapons. So, which do you prefer? You can view these weapons in greater clarity. For myself, this is my favourite, mainly because of the attached bayonet. The protective equipment has thick armour on their front based on the above image and the back of it too. This is an image of the resistance trooper with helmet off. Personally, I am quite fond of their armour equipment and it makes good apocalyptic era in these typical warfare. The wanted Bandit Anyone seen this wanted Bandit? He is armed and he is dangerous. Please inform the sheriff and avoid confronting him on your own. There is a high likelihood that you will get hurt or more. With the main customised elements laid on the floor, you will get a different sort of colour variation on the sombrero and adds some variety into it, other than the ones which is seen in the Mexican which is from the LEGO Collectable Minifigures Series 2. Furthermore, if you are a knife collector, then this Bowie knife will also make a fine addition into the Wild West era. The money-minded Mercenary Even though, no one really used much of this rifle since it is almost near extinction. Well, this mercenary finds it useful to shoot down its target like a buffalo and it does comes with long range. This buffalo rifle is mainly used by professional buffalo hunters and the long scope serves to shoot for capturing targets in its perimeter. I will probably used it to hang in some museum instead of using to snipe the enemies. The calm Sniper He is ready. At least he looks prepared with his meanie gadget and expression. He does have lots of confidence with that smirking looks of his. I am sure he will sit high on some tall buildings and hold his whiskey to wait for his target passing by. I believe the suppressed sniper rifle is probably a generic version. I don't think it associates it with any particular model, but I might be mistaken about it. At least, I would identify the different parts of the weapon such as the butt, scope, chamber, etc. Not too bad for such a generic looking rifle. The futuristic Space Police When Space Criminals run loose, the Space Police enforcement will comes in and take them down. But without proper weapons, they are unable to deal the threat effectively. So, with this proton-charged pistol, the Space Police officer will be able to deal with them effectively. Well, I will think this is a decent looking pistol to equip your space futuristic characters. Judging by the compact looking design, I do think and will like to think that it is potentially lethal. Don't mess around with it. Let's stand still and pose for a photo shot! In general, I am very satisfied with the quality of BrickWarriors customisation products. They are certainly made up of excellent ABS plastic material that forms the detailed shape of these unique special customised designs right from the weapons down to the apparels. Every bit of it demonstrates the dedication and commitment of a good manufacturer like we see in the minifigure customisation industry. Likewise, prices for the parts are fair and justifiable. It might varies against from regions and resellers, but I am sure the pricing policy will still be maintained. My only wish is to see more countries being listed into their shipping list, so more global collectors will have a chance to get them. For those who are still hesitating of getting it, you should probably pick a few preferred pieces of your choice and feel it for yourself before deciding to get more. I have also included a poll. So, go ahead and choose your favourite customised characters and tell me why you like it in your reply. Pictures can be found in My Flickr and Brickshelf folder (when moderated).

No problem at all. At the same time, it might clarifies for those who had that question in mind. That was fast.

Err... Am I not clear? By definition, I meant customisation, it means customisation such as customised decals, painting, etc. Of course, you can mix and match with official elements.

Yes. As much as possible, place them in the exact same movie scene. It must be seen in the vignette. Not necessary need to be seen together side by side. No, there is no limit to parts and minifigures used, except the mentioned Collectable Minifigures. Yes, no customised minifigures are allowed.

Opps I am late again for my medicine... Guess I am left with no choice, Day Six: 1. The Big Fat Pill Pandoo 2. Red Devils Shinobu Shiroba 3. Sponk Boo Cameron 4. Peach Cobbler Draxia 5. Downers Shadows 6. Bug Dust Rickety Cannon 7. DMT Manuel Bukowski

Access granted. Welcome to Reviewers Academy.

I thought we are almost done in getting rid of the scums once and for all, but it appears we had messed it up with our conviction. Our numbers are dwindling and our night actions are getting much limited than ever before. We need to make the correct conviction. We have successfully convicted 3 scums in a row and we will keep on pressing to flush the rest out of the pipeline. Felt very sad that we lost Kelly too...

No problem. Topic merged into Category A. Please note that your first image is extremely blurred. Please take a better and clearer shot or it might be considered for disqualification. I understands that it's still WIP. Please indicate the WIP in the first line, so I will take note. Thank you and good luck.

Dear CanadaClark, here is my entry. I call it "Happy-Fun-Time-Destruction." Edit by WhiteFang: Entry does not meet the rules. Participant requires to re-submit a new updated entry or it will be disqualified. Your entry for Category A does not meet the rules which I have stated and I have list those rules below. Read the rules carefully again and amend it for editing before the deadline. Thanks. Separate thread is not allowed to post WIPs. However, you may post your WIP in the entry thread. All entries will be finalised upon closing.

The prizes are really very good and generous. Good luck to the ones who are participating in this contest.

Hello Bricks-on-Rails, Welcome to Eurobricks. As a member like yourself, I don't appreciate your very first post to be related to sales and advertising of websites and stuff like that. There can be times like this but I don't appreciate much when your intentions are just merely for advertising instead of enjoying yourself with our fellow Eurobricks members within our community among the different topics interest. I have extracted the site guidelines for your reference and bold the line which is required for your attention. Thus, I will remove the URL in the first post and locked this topic. WhiteFang

As what Oky had mentioned, you are allowed to participate in both categories with 1 attempt each.

Merged your topic over here, and for your question, get a few more of MMV before it's officially discontinued. Worth every penny.

Cecilie interpreted it correctly. I have also updated 2 lines of the rules to mention this portion, to avoid misunderstanding.

To be honest, all of the polybags are great especially when I don't own any of them! So, I am looking forward to pick this up!