River

What a totally terrific turbo turtle! This is awesome =D

Hi everyone, this is the first time I have posted one of my creations so please be gentle. After watching Guardians of the Galaxy 3, I knew exactly what to do with my unopened 31133 set - make a cybernetic bunny. So here is my version of Floor in all her adorableness. Since she will be more display than play, I've elected to swap out most of her ball joints with white hinge joints (dependent upon my current brick collection). Her tootsies have rubber toes. If anyone wants closeups or more details, please feel free to ask. I tried making her with Red, and trans red eyes but she wasn't as adorable as with the magenta. I welcome critique and sugestions. (my couch made a surprising good and neutral impromptu photobox XD )

Thank you for the reply. I'm afraid I have no idea how to adjust the ramp time in the Buwizz app, and as far as I can tell, the power curve is at least represented by a straight line in the app. I wish I could send a video of what's happening to me but the device I would use to record, is also the device running the Buwizz app.

Welp, I took the motors out so they have as close to zero load possible and tested each independently. I used the vertical slider control rather than joystick. There seems to be a LOT of dead movement - about 75% - before the motors actually turn while the Buwizz quietly screeches. Then the motors do incrementally turn, from zero to 100% in about 10% of stick movement. I have not touched the power curve, other than to confirm it is a straight line. There's also various levels of lag for each Buwizz output, up to about 2 seconds. Battery is fully charged if that helps Can anyone guess what I might be doing wrong?

Hi, all my testing thus far has been off the ground with next to load at all. The front motors pass though a universal joint but otherwise barely any friction, rear motors though one pair of gears. I realise I might have to disassemble the motors out of the model and test with absolutely zero load.

Hi everyone, I'm looking for some trouble shooting advice, and as far as I can tell, this is about the only place on the internet where I can ask my vastly superiors. I have a large 2000 piece off road buggy in the works, with 4 old PF large motors - one for each wheel, brand-new servo motor for steering, and 2 X brand-new Buwizz 2.0 for power and control. One Buwizz for left side motors, the other for right side, plus servo. I'm at the point getting everything working smoothly before finishing final construction and aesthetics. The problem I'm having is the motors more or less behaving like full power or no power with no incremental increase. At lets say half power on the joystick control on the Buwizz app, there is a quiet high pitch buzzing noise from the Buwizz brick and a vague sound like the motor is struggling to turn - but no issues at all at full power. (also finding joystick control not letting me have full power to the drive motors and servo simultaneously since the stick can't reach the diagonal corners.) If it helps, I have moderate experience with Lego Power Functions, none with Buwizz, and heaps with full RC vehicles - both cars and planes. Any advice anyone could nicely provide me would be most welcome, thank you.