[MOC] Subaru WRX STI W/ Instructions
After 9 month of work, I present the completed version of my latest Moc, a 2019 Subaru WRX STI
It features :
AWD, with lockable central differential
6+R Sequential gearbox
Fornt McPherson Suspension
Rear double wishbone suspension, with anti-roll bar
Working fake boxer engine
Opening doors (front one with handle)
Opening hood (or bonnet)
Opening trunk
Interior with detailed dashboard
Decorated engine bay
Render of the gearbox :
Full driveline The belly shot The interior, with some detail, such as aerations. Engine bay, made to look as close as possible to the real one : It can also be built in white, with some minor adjustments. I also created Instructions for it. The instructions are made for the black one, but can, with minor adjustment be used for the white one.
The instructions are 1218 pages long, handmade with Stud.io 2.0.
You can download a sample here.
Or look down here. You can Buy the instructions on Rebrickable. https://rebrickable.com/mocs/MOC-38243/Toucanx/subaru-wrx-sti/#comments And of course a video : I Hope you like it.
If you have any question, don't hesitate, I will try to answer quickly. After this line, starts the WIP thread. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Hi everyone,
It's been a long time since I haven't posted on this forum, but today I would like to share a new project that I have started not so long ago.
It's a Subaru Impreza WRX STI car that I will make.
The list of what I will put in the car is the following : Awd Boxer 4 engine McPherson suspension for the front wheels Indépendant double whisbone for the rear wheels Lockable central differential 5 speed sequential gearbox I searched a bit for 5-speed sequential gearbox but I didn't found any. So I took a 4-speed gearbox design by @Rage_Hobbit (found there) and I added a 5th speed.
Here is the result :
You can download the .lfx. Note that you are supposed to place rubber band linking the orange pieces to the black one under the blue triangle.
I have already made the boxer engine and most of the chassis. It will use these wheels :
It's the one that are used in 42077 rally car. However I ran in a problem, it seems that the gearbox can not support the force involved in the transmission. The gears do a lot of skipping noises (doesn't sound healthy for the pieces). So I wanted to know if anyone knew a reliable 5-speed sequential gearbox / a 5+r sequential gearbox.
That's it for today. More updates coming soon.
Full driveline The belly shot The interior, with some detail, such as aerations. Engine bay, made to look as close as possible to the real one : It can also be built in white, with some minor adjustments. I also created Instructions for it. The instructions are made for the black one, but can, with minor adjustment be used for the white one.
The instructions are 1218 pages long, handmade with Stud.io 2.0.
You can download a sample here.
Or look down here. You can Buy the instructions on Rebrickable. https://rebrickable.com/mocs/MOC-38243/Toucanx/subaru-wrx-sti/#comments And of course a video : I Hope you like it.
If you have any question, don't hesitate, I will try to answer quickly. After this line, starts the WIP thread. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Hi everyone,
It's been a long time since I haven't posted on this forum, but today I would like to share a new project that I have started not so long ago.
It's a Subaru Impreza WRX STI car that I will make.
The list of what I will put in the car is the following : Awd Boxer 4 engine McPherson suspension for the front wheels Indépendant double whisbone for the rear wheels Lockable central differential 5 speed sequential gearbox I searched a bit for 5-speed sequential gearbox but I didn't found any. So I took a 4-speed gearbox design by @Rage_Hobbit (found there) and I added a 5th speed.
Here is the result :
You can download the .lfx. Note that you are supposed to place rubber band linking the orange pieces to the black one under the blue triangle.
I have already made the boxer engine and most of the chassis. It will use these wheels :
It's the one that are used in 42077 rally car. However I ran in a problem, it seems that the gearbox can not support the force involved in the transmission. The gears do a lot of skipping noises (doesn't sound healthy for the pieces). So I wanted to know if anyone knew a reliable 5-speed sequential gearbox / a 5+r sequential gearbox.
That's it for today. More updates coming soon.
After 9 month of work, I present the completed version of my latest Moc, a 2019 Subaru WRX STI
It features :
AWD, with lockable central differential
6+R Sequential gearbox
Fornt McPherson Suspension
Rear double wishbone suspension, with anti-roll bar
Working fake boxer engine
Opening doors (front one with handle)
Opening hood (or bonnet)
Opening trunk
Interior with detailed dashboard
Decorated engine bay
Render of the gearbox :
Full driveline The belly shot The interior, with some detail, such as aerations. Engine bay, made to look as close as possible to the real one : It can also be built in white, with some minor adjustments. I also created Instructions for it. The instructions are made for the black one, but can, with minor adjustment be used for the white one.
The instructions are 1218 pages long, handmade with Stud.io 2.0.
You can download a sample here.
Or look down here. You can Buy the instructions on Rebrickable. https://rebrickable.com/mocs/MOC-38243/Toucanx/subaru-wrx-sti/#comments And of course a video : I Hope you like it.
If you have any question, don't hesitate, I will try to answer quickly. After this line, starts the WIP thread. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Hi everyone,
It's been a long time since I haven't posted on this forum, but today I would like to share a new project that I have started not so long ago.
It's a Subaru Impreza WRX STI car that I will make.
The list of what I will put in the car is the following : Awd Boxer 4 engine McPherson suspension for the front wheels Indépendant double whisbone for the rear wheels Lockable central differential 5 speed sequential gearbox I searched a bit for 5-speed sequential gearbox but I didn't found any. So I took a 4-speed gearbox design by @Rage_Hobbit (found there) and I added a 5th speed.
Here is the result :
You can download the .lfx. Note that you are supposed to place rubber band linking the orange pieces to the black one under the blue triangle.
I have already made the boxer engine and most of the chassis. It will use these wheels :
It's the one that are used in 42077 rally car. However I ran in a problem, it seems that the gearbox can not support the force involved in the transmission. The gears do a lot of skipping noises (doesn't sound healthy for the pieces). So I wanted to know if anyone knew a reliable 5-speed sequential gearbox / a 5+r sequential gearbox.
That's it for today. More updates coming soon.
Full driveline The belly shot The interior, with some detail, such as aerations. Engine bay, made to look as close as possible to the real one : It can also be built in white, with some minor adjustments. I also created Instructions for it. The instructions are made for the black one, but can, with minor adjustment be used for the white one.
The instructions are 1218 pages long, handmade with Stud.io 2.0.
You can download a sample here.
Or look down here. You can Buy the instructions on Rebrickable. https://rebrickable.com/mocs/MOC-38243/Toucanx/subaru-wrx-sti/#comments And of course a video : I Hope you like it.
If you have any question, don't hesitate, I will try to answer quickly. After this line, starts the WIP thread. ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Hi everyone,
It's been a long time since I haven't posted on this forum, but today I would like to share a new project that I have started not so long ago.
It's a Subaru Impreza WRX STI car that I will make.
The list of what I will put in the car is the following : Awd Boxer 4 engine McPherson suspension for the front wheels Indépendant double whisbone for the rear wheels Lockable central differential 5 speed sequential gearbox I searched a bit for 5-speed sequential gearbox but I didn't found any. So I took a 4-speed gearbox design by @Rage_Hobbit (found there) and I added a 5th speed.
Here is the result :
You can download the .lfx. Note that you are supposed to place rubber band linking the orange pieces to the black one under the blue triangle.
I have already made the boxer engine and most of the chassis. It will use these wheels :
It's the one that are used in 42077 rally car. However I ran in a problem, it seems that the gearbox can not support the force involved in the transmission. The gears do a lot of skipping noises (doesn't sound healthy for the pieces). So I wanted to know if anyone knew a reliable 5-speed sequential gearbox / a 5+r sequential gearbox.
That's it for today. More updates coming soon.