thewatchman Posted November 15, 2021 Posted November 15, 2021 Does anyone have the sails for 7029 “skeleton ship attacks”? Quote
hankdelsi Posted January 6, 2022 Posted January 6, 2022 On 3/27/2015 at 5:16 PM, Sigolf Brimabane said: Hmm... Would it be possible to commission someone here to make replicas of the sails for the BSB? Originals are hard to come by. I don't feel confident enough to make my own xD I might make a try first though. I'll ask this question as well as I got my hands on a Red Beard Runner 6289 but without the sails, does anyone make those on similar fabric that would be willing to make these for me? Feel free the dm me if interested, thanks. Quote
Olivesaxer Posted January 10, 2022 Posted January 10, 2022 Hi- I just noticed that 6271 does not have the jib sail attached. Here is a scan. On 11/15/2021 at 1:35 AM, thewatchman said: Does anyone have the sails for 7029 “skeleton ship attacks”? I have it but the file size limit wont let me post here. Not sure how to fix that, but if you shoot me a note with your email, I can just send it to you. Quote
ShineBOI Posted December 6, 2022 Posted December 6, 2022 Does anyone have templates for the sails for both the Black Pearl and the Queen Anne's Revenge, it can be ready to print or not but I would prefer that it was ready to print. (and yes I know someone has scanned the Queen Anne's revenge sails here but they're missing the small top sail) Quote
SkaMasta097 Posted March 26, 2024 Posted March 26, 2024 I scanned my 6289 Red Beard Runner sails. Quote
SkaMasta097 Posted March 26, 2024 Posted March 26, 2024 On 1/9/2022 at 6:29 PM, Olivesaxer said: I have it but the file size limit wont let me post here. Not sure how to fix that, but if you shoot me a note with your email, I can just send it to you. Can you send it to me too in PDF format? skamasta097@gmail.com Quote
Governor Mister Phes Posted March 29, 2024 Governor Posted March 29, 2024 It appears I'm a bit late to the shindig here... On 1/10/2022 at 11:29 AM, Olivesaxer said: I have it but the file size limit wont let me post here. Not sure how to fix that, but if you shoot me a note with your email, I can just send it to you. The file size limit will be increased after you reach 10 posts. Eurobricks does this to prevent people from signing up to use the forum as an image hosting site. Quote
pakrawck Posted June 11, 2024 Posted June 11, 2024 (edited) In the link below, you will find sails in PDF format for the Lego 6285 set. The material was created based on resources from this forum, solely for my children's play, so it is not perfect. However, I hope it will be useful to someone. https://mega.nz/folder/09EmGY7K#0rZ8cIUJtaRS6TA22RvwOg Edited June 12, 2024 by pakrawck Quote
TomSkippy Posted August 22, 2024 Posted August 22, 2024 Does anyone have 1:1 scans of the Pirates of Barracuda Bay sails yet? Quote
NOD Posted August 22, 2024 Posted August 22, 2024 (edited) 2 hours ago, TomSkippy said: Does anyone have 1:1 scans of the Pirates of Barracuda Bay sails yet? No idea why, but I have 2020 scan the sail. The 6 jpg files can be downloaded until 29 August. Sails Lego PIRATES OF BARRACUDA BAY - 21322 Edited August 22, 2024 by NOD Quote
TomSkippy Posted August 24, 2024 Posted August 24, 2024 (edited) On 8/21/2024 at 9:37 PM, NOD said: No idea why, but I have 2020 scan the sail. The 6 jpg files can be downloaded until 29 August. Sails Lego PIRATES OF BARRACUDA BAY - 21322 You are awesome! I recolored and added to my flickr album. I included credit for you NOD! Let me know if I should change anything! Edited August 24, 2024 by TomSkippy Quote
NOD Posted August 25, 2024 Posted August 25, 2024 14 hours ago, TomSkippy said: You are awesome! I recolored and added to my flickr album. I included credit for you NOD! Let me know if I should change anything! Perfect, you did a good job! Quote
TomSkippy Posted January 2 Posted January 2 Does anyone have 1:1 scans of the new Eldorado sails? I'm working on a sloop and I noticed that in bricklink/photos the new Eldorado sails are a different size than the original Imperial Guards Trading Post. I'm specifically looking for the main sail. The resolution doesn't have to be good, I just need a scale shot of the dimensions that I could trace and make my own. Quote
CaptainMoore Posted January 2 Posted January 2 2 hours ago, TomSkippy said: Does anyone have 1:1 scans of the new Eldorado sails? I'm working on a sloop and I noticed that in bricklink/photos the new Eldorado sails are a different size than the original Imperial Guards Trading Post. I'm specifically looking for the main sail. The resolution doesn't have to be good, I just need a scale shot of the dimensions that I could trace and make my own. Would my answeron the thread about switching the sails with the old one work for you? Quote
TomSkippy Posted January 4 Posted January 4 On 1/2/2025 at 1:12 AM, CaptainMoore said: Would my answeron the thread about switching the sails with the old one work for you? They worked perfectly! Thanks!! Quote
KarmaDrumSticks Posted March 24 Posted March 24 I'm new to a lot of this, but I'm having trouble print the scales at the correct size. I'm trying to reprint the sails from set 6271, The Imperial Flagship, and set 6267, Lagoon Lockup. When I click on the images, I am taken to a google image and when I ctrl + p the print is wrong. It could just be difficult to put them on, but the Lagoon Lockup sail is too big. It doesn't quite fit right, unless it's supposed to be that way. When I print the sails for the Imperial Flagship, they are too small, and aren't billowy enough, and I can't put them in place. I could be printing them at the right size, and just be putting them on wrong. I'm trying to restore my uncle's old LEGO pirate collection that I just got. Any help would be greatly appreciated. Quote
bingowaldorf Posted April 3 Posted April 3 On 3/24/2025 at 7:20 PM, KarmaDrumSticks said: I'm new to a lot of this, but I'm having trouble print the scales at the correct size. I'm trying to reprint the sails from set 6271, The Imperial Flagship, and set 6267, Lagoon Lockup. When I click on the images, I am taken to a google image and when I ctrl + p the print is wrong. It could just be difficult to put them on, but the Lagoon Lockup sail is too big. It doesn't quite fit right, unless it's supposed to be that way. When I print the sails for the Imperial Flagship, they are too small, and aren't billowy enough, and I can't put them in place. I could be printing them at the right size, and just be putting them on wrong. I'm trying to restore my uncle's old LEGO pirate collection that I just got. Any help would be greatly appreciated. I used these files recently to print sails with success. They are scans from 10210 traced over in illustrator as a pure black and white image so that I could get best results from a basic laser printer. I don’t know if they would work with an inkjet printer as I have not tried that but if you set it to black and white mode that might do the trick. For scaling I opened each image in pages and just did test prints at different sizes until I got what I needed. Here is a google drive link, if there is a better way to share files on this forum please let me know how and I will update this. https://drive.google.com/drive/folders/1HP3mfuD6Iw1ELpLyGG_vVczk9dEx57u9 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.