unimog123 Posted January 25, 2014 Posted January 25, 2014 This is my first big project for this year. Here's what I have: As you can see, the rear axle still needs to be reinforced, so I was wondering if anyone as some solutions. Also do you think 2 L motors geared 1:1 to differential will be sufficient between speed and torque. Quote
timslegos Posted January 25, 2014 Posted January 25, 2014 I too am building a trophy truck, though on a smaller scale. If you are going for both speed and torque, I would recommend a buggy motor(also what I am using). The high speed output means you can gear it down and get even more torque while keeping a relatively high speed. tim Quote
Junpei Posted January 25, 2014 Posted January 25, 2014 Looks great so far! Might want to put another degree of freedom on the shock mounts though Or is it completely non-independent? As timslegos said, although they are quite expensive, buggy motors are perfect for something like this. They're a lot faster, and while you could gear up your 2 L-motors, more gearing = more power loss and ultimately a lot less fun. Good luck! TLH Quote
unimog123 Posted January 25, 2014 Author Posted January 25, 2014 I do have an rc buggy motor, but I don't think it would be very efficient. As you could have guessed it's going to be using Unimog tires, so I think just one would be a bit weak. I'm hoping that the big tires will give decent speed, with great torque. Quote
unimog123 Posted January 25, 2014 Author Posted January 25, 2014 More Progress: First version chassis This version has many flaws, such as a loose rear axle, the caster or camber angle ( I don't know which one it is ) is messing up the steering, and the servo is able to pull the A-arms off because of the steering situation. There has been some improvements, I gave it an internal roll bar sort of thing to help support the chassis. Quote
z3_2drive Posted January 26, 2014 Posted January 26, 2014 (edited) If you could please give some more photos of the front suspension, preferably without wheels on, I would like to help you out! For now here's a simple lightweight chassis I made long ago: http://www.brickshel...ry.cgi?f=511390 EDIT: On Brickshelf there should be tons of inspiration for a stronger rear axle, but I would avoid using axle connectors instead of liftarms to brace things with, because with a little trial and error you will always find a nice bracing point with liftarms rather than dealing with 1/2 stud offsets and axles that slide apart. Edited January 26, 2014 by z3_2drive Quote
unimog123 Posted January 26, 2014 Author Posted January 26, 2014 I see what you mean, but I literally meant that I need to reinforce the driveshaft after the differential because it is a bit loose. As for the front suspension I might take more pictures, but it will probably be with a changed setup. Just to make it simpler and stronger hopefully. Thanks Quote
Junpei Posted January 26, 2014 Posted January 26, 2014 The progress is looking great so far! Looks like it will be very light weight. What battery box are you using? TLH Quote
Lakop Posted January 26, 2014 Posted January 26, 2014 Interesting! I started on a trophy truck a few weeks ago but gave up as I could not work out how to mount my rear suspension. Anyway, I will come back to it later. Your progress is good so please take your time to develop it. H Quote
AndyCW Posted January 26, 2014 Posted January 26, 2014 I worry about the spider gears in your differential. Most vehicles that use that size tire will use reduction after the differential to "protect" the spider gears. On the other hand, you might not have enough torque to damage them. v/r Andy Quote
unimog123 Posted January 26, 2014 Author Posted January 26, 2014 I've finally finished. So, overall it has 2 rechargeable battery boxes, 2 V2 IR receivers, 2 L motors, 1 servo motor, and 1 pair of LED's for the roof lights. I have already taken it outside in the snow (after pictures) and it has good traction, torque, and goes a little bit faster than walking speed. More information will be on my website shortly. Quote
MrNumbskull13 Posted January 26, 2014 Posted January 26, 2014 Wow that was fast. Looks great, I can't wait to see it perform! Quote
timslegos Posted January 26, 2014 Posted January 26, 2014 Wow that was fast! Great looking truck too. tim Quote
unimog123 Posted January 26, 2014 Author Posted January 26, 2014 Thanks guys. About the video, I still am uncertain on how to post it to my website. If I do figure it out then I plan to make a short video. Quote
jantjeuh Posted January 27, 2014 Posted January 27, 2014 You work very quickly. Impressive. Good job on the bodywork, too. Quote
Paul Boratko Posted January 27, 2014 Posted January 27, 2014 Nice work for such a fast build, wow..! Sometimes I spend 2 weeks doing a door... Quote
unimog123 Posted January 27, 2014 Author Posted January 27, 2014 Thanks everyone! I just finished the post on my website. More information: Quote
unimog123 Posted January 27, 2014 Author Posted January 27, 2014 Thanks, although my next build won't be so fast. Quote
AndyCW Posted January 27, 2014 Posted January 27, 2014 That was a fast build. Did you try it with only one battery and RX? The power demands of those motors may be within the capacity of a single rx and battery. The reduced weight may help too. v/r Andy Quote
zux Posted January 27, 2014 Posted January 27, 2014 Woah, what a good looking MOC! Body is very cool - I really would love to build it. Quote
HorcikDesigns Posted January 27, 2014 Posted January 27, 2014 Very nice truck, I like it! However, I have one question - Why did you use two BBs and recievers? Well, the BBs for centering the weight, but why doubble reciever? Because of power consumption? I don't think so, Two Ls and servo with lights does not consume so much power like RC Buggy motor ;) However, I'm not sure ;) PS: looking forward to see the video ;) Quote
legomuppet9 Posted January 27, 2014 Posted January 27, 2014 Really like this MOC, elegantly made, with a nice choice of colours (in the chassis too) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.