Jump to content

REVIEW: 7325 Cursed Cobra Statue

Hinckley

By Hinckley
in LEGO Action and Adventure Themes

 Share

How do you rate this set?  

108 members have voted

  1. 1. How do you rate this set?


Recommended Posts

CMP

CMP

Posted
Posted

Honestly, I disagree. Ball joints are much more articulated than those click joints. You have a lot more ease with moving it around, and it looks much more natural than it would with click joints. And you can't really blame them for the small alter; they could've really cheaped out and put nothing else in. :laugh:

BearHeart

BearHeart

Posted
Posted

Great Review.

I'm probably going to skip this particular set myself. Not enough interest in it for the price.

I might pick it up if it goes on sale and I have extra LEGO money laying around.

Cpt. Dan

Cpt. Dan

Posted
Posted

I love all of these sets but I went to my local TRU today and they didn't have them yet. I was pretty disappointed because when I go home for Thanksgiving I am not sure I want to go out on Black Friday.

For some reason, I think this is the best line Lego has come out with for a long time. It has a nice mix of nostalgia of old and style of new. I have to get these soon!

Still Raindrop

Still Raindrop

Posted
Posted (edited)

Thanks for the review! I really like that Jeep, as well as the minifigures. The girl is great, and I really like Jake Raines. You've mentioned it twice, but I don't really see how he looks like Elvis. I mean, he has sideburns, but that's about it.

Edited by Mariko
Wout

Wout

Posted
Posted

Thank you for the nice review Hinckly! :thumbup::classic:

What a great female minifig with her cute freckles. :wub:

Pity I don't like the big snake which is +/- 65% of this set.

Maybe she will come in another set in the second half of next year.

Walter Kovacs

Walter Kovacs

Posted
Posted

Nice review, Hinck. The articulation of the snake is a turn off for me, but my son went absolutely ga-ga over the frontpage picture, so I guess he's going to end up with it at some point. The set definitely looks cool.

buddy

buddy

Posted
Posted

A great review for a great set! :thumbup:

It's good that 1 x 2 tiles are now available in Dark Orange.

Well done on the review, Hinckley. :classic:

~buddy~

prateek

prateek

Posted
Posted (edited)

Boo! Worst PQ set ever!!! :grin:

I like the female fig and the car, but that's it. To the parts bin!

Just a side note, this car is inaccurate, considering Egypt has Left hand drive cars :laugh:

Edited by prateek
DJ Force

DJ Force

Posted
Posted

Thanks for the review, Hinckley!

I love the female minifig. There´s just something about redheads that turns me on :laugh:

Apart from that, the set hasn´t much value for me. Poor design, only a handful of useful generic parts and a pricepoint that´s just ridiculous. Seriously! $30 for 213 pieces? When built, it looks rather like a $20 set, and even for that it would be a little bit overpriced.

I voted below average.

Arigomi

Arigomi

Posted
Posted

I suspect the design was aimed more towards making the cobra swooshable than poseable for pictures.

The price of this set is making me once again question how much this theme will cost overall.

Seeing that mummy juggle snakes reminds me of Serpentor from G.I. Joe and the snakes he throws like javelins.

SpiderSpaceman

SpiderSpaceman

Posted
Posted

Nice review! It should be noted that the socket joints are a new style (yes, a third one) that does not taper the way the previous two styles did. We got a preview of this new style when LDD 4.0 was released, but this is the first time seeing it in an actual set. Here's a comparison between the new piece (92013) and the previous version (62712). The new joint is based on the type from the Ben 10 action figure sets, which is supposedly more resistant to breakage than previous styles of socket-joint-- we'll see if that holds true!

yeah that may definitely make it worth getting for me. I couldn't tell there were ball sockets in this set until the review (btw thanks for the great review, Hinkley)

side note - LDD factory mode shows the new sockets but i don't trust that they won't mix in the old till they've run out, and I don't need any more that are gonna crack on me in the first week of use

Front

Front

Posted
Posted (edited)

...It should be noted that the socket joints are a new style (yes, a third one) that does not taper the way the previous two styles did. We got a preview of this new style when LDD 4.0 was released, but this is the first time seeing it in an actual set. Here's a comparison between the new piece (92013) and the previous version (62712). The new joint is based on the type from the Ben 10 action figure sets, which is supposedly more resistant to breakage than previous styles of socket-joint-- we'll see if that holds true!

The new ball cups are surely more resistant to breaking. They will NOT break, and that says a lot because moc'ers of Bionicle have rarely used the term "Not break" to describe the behavior of older types of ball cups.

The problem with the flimsy snake is due to the fact that the ball cups have lover friction than what they used to have. That came together with the not-break solution. The friction in the ball/ball-cup connection is maybe challenged a bit too much by the design of this set. It's a question of what the consumer expect. Maybe most kids will not see it as too flimsy. I sure do not hope they will, and I think Hinckley's problem with posing the snake might also be a problem with balancing the structure than just the friction being too low to carry the weight of the snake. But too be honest I haven't built this set.

yeah that may definitely make it worth getting for me. I couldn't tell there were ball sockets in this set until the review (btw thanks for the great review, Hinkley)

side note - LDD factory mode shows the new sockets but i don't trust that they won't mix in the old till they've run out, and I don't need any more that are gonna crack on me in the first week of use

The new ball cup design, used on all the new Hero Factory parts but also this 2x2 brick with ball cup, has resulted in all new part design numbers, so I would be VERY surprised of an old style of ball cup would mix into this 2011 set. It should not be possible.

Erland, Part Design

Edited by Front
Rumble Strike

Rumble Strike

Posted
Posted

Great review as always.

From the build pics I preferred the look of the snake when the hood wasn't attached. It looks a bit goofy with that giant hood.

I think this was a good concept but the execution was slightly off.

SpiderSpaceman

SpiderSpaceman

Posted
Posted

The new ball cup design, used on all the new Hero Factory parts but also this 2x2 brick with ball cup, has resulted in all new part design numbers, so I would be VERY surprised of an old style of ball cup would mix into this 2011 set. It should not be possible.

OK, thanks for confirming that

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...