New U Clips from Brickarms

[Dr. Steve]

Here are some pics of the 4 different colors of U-clips and how they look with a few different weapons

I really like the Damien Blade I also got from brickarms. I only got one in Dark Gray and I am going to order one in gunmetal and one in silver to see which one looks the best as a bayonet.

1. Gunmetal

2. Black

3. Silver

4. Dark Gray

Dark Gray Clip and Damien Blade (I had to cut the hand protector off of one side to make it fit)

[Admiral Croissant]

I think the Damien Blade is too big, the blade is almost bigger than the gun. I think the best choice is the gunmetal or the silver clip with a normal blade. Maybe you should also cut off the handprotector of this blade because it's pointed a little bit downwards now, but that's not neccesary (and maybe you can also fix the problem by shifting the clip a bit backwards, if you know what I mean. That's my opinion, you decide what you're going to do with it good luck!

[Captain Green Hair]

I like the Damien blade a lot, looks very mean and nasty!

Didn't realize the clips were so thick though, i thought they were thinner.

Thanks for the pics!

[Dr. Steve]

I think the Damien Blade is too big, the blade is almost bigger than the gun. I think the best choice is the gunmetal or the silver clip with a normal blade. Maybe you should also cut off the handprotector of this blade because it's pointed a little bit downwards now, but that's not neccesary (and maybe you can also fix the problem by shifting the clip a bit backwards, if you know what I mean. That's my opinion, you decide what you're going to do with it good luck!

My concern with the Damien blade is also the length, I just really like the look of the piece

Shifting the blade did not work. I agree that the hand protector on the knife needs to be cut as well (I used scissors on the Damien blade, but I need to use and Exacto Knife to fut the smaller one).

[Admiral Croissant]

My concern with the Damien blade is also the length, I just really like the look of the piece

I aggree with that! the Damien blade looks very cool

I agree that the hand protector on the knife needs to be cut as well (I used scissors on the Damien blade, but I need to use and Exacto Knife to fut the smaller one).

good idea, I hope you will manage to cut it well. Maybe you can try it with a 'wire cutter' (does that mean anything to you? ) there are very small versions of them.

[woody64]

Neverless the u-clip is a very cool item.

Woody64

[the enigma that is badger]

Glad you like the U-Clip and Damien Blades! The Damien Blade is a fantastic work, and the U-Clip really is a handy little piece. Will actually has some neat plans about other accessories that could use it!

As for the Damien Blade, I'd agree that the blade unmodified is a perhaps a bit too long relative to the rifle, but it is a neat, savage look having such a long blade at the end of a weapon.

I do agree that trimming the hand guard off the other end would probably make the piece look a bit polished.

Of course, if you're willing to wait a little bit, BrickArms does have a new item in the pipeline I think you'll enjoy!

Didn't realize the clips were so thick though, i thought they were thinner.

The prototype version (as seen above) was a bit thinner, but to ensure a solid connection and a sturdy piece, Will made it a bit thicker for the production version. It real life, it's really not that thick (about the same width as a minifig hand), but macrophotography tends to make it appear larger than it really is.

[General Armendariz]

Of course, if you're willing to wait a little bit, BrickArms does have a new item in the pipeline I think you'll enjoy!

Thats what im waiting for

[Scouty]

Bayonets are more often on the right side of the musket, than under it. Most muskets I've seen and the one I have (though it's American Civil War) is on the side.

Anyway, I think it looks great. Really looks like the sword type bayonets!

[Zorro]

Looks very good. Most usable elements for us armybuilders.

Of course, if you're willing to wait a little bit, BrickArms does have a new item in the pipeline I think you'll enjoy!

I await this pipelined item with great impatience !

[Dr. Steve]

Glad you like the U-Clip and Damien Blades! The Damien Blade is a fantastic work, and the U-Clip really is a handy little piece. Will actually has some neat plans about other accessories that could use it!

As for the Damien Blade, I'd agree that the blade unmodified is a perhaps a bit too long relative to the rifle, but it is a neat, savage look having such a long blade at the end of a weapon.

I do agree that trimming the hand guard off the other end would probably make the piece look a bit polished.

Of course, if you're willing to wait a little bit, BrickArms does have a new item in the pipeline I think you'll enjoy!

The prototype version (as seen above) was a bit thinner, but to ensure a solid connection and a sturdy piece, Will made it a bit thicker for the production version. It real life, it's really not that thick (about the same width as a minifig hand), but macrophotography tends to make it appear larger than it really is.

Can't wait! Any chance you could tell us when we might see that new item?

[Captain Blackmoor]

Dr. Steve, could you please post a picture with an Imperial soldier with a musket and U-clip, but with a common LEGO cutlass as bayonet?

I think the cutlass is slightly shorter then the damien blade. The upcoming bayonet from Brickarms looks great but I just want to know how a common cutlass looks like.

I've tried it with a hook like Martin did but I've never seen it with U-clips.

Thanks in advance!

[Dr. Steve]

Dr. Steve, could you please post a picture with an Imperial soldier with a musket and U-clip, but with a common LEGO cutlass as bayonet?

I think the cutlass is slightly shorter then the damien blade. The upcoming bayonet from Brickarms looks great but I just want to know how a common cutlass looks like.

I've tried it with a hook like Martin did but I've never seen it with U-clips.

Thanks in advance!

I will do that tomorrow

[tedbeard]

I think the Damien blade (or cutlass) make a great sword-bayonet for the Riflemen under Richard Sharpe.

[Dr. Steve]

Dr. Steve, could you please post a picture with an Imperial soldier with a musket and U-clip, but with a common LEGO cutlass as bayonet?

I think the cutlass is slightly shorter then the damien blade. The upcoming bayonet from Brickarms looks great but I just want to know how a common cutlass looks like.

I've tried it with a hook like Martin did but I've never seen it with U-clips.

Thanks in advance!

Here You Go

[Captain Blackmoor]

Thanks! I think only the musket needs an update. Now it's more a blunderbuss instead of a tight musket.

I am really thinking about buying these U-clips. They aren't only handy for bayonets but also for a lot of other things.

[Dr. Steve]

Thanks! I think only the musket needs an update. Now it's more a blunderbuss instead of a tight musket.

I am really thinking about buying these U-clips. They aren't only handy for bayonets but also for a lot of other things.

I agree, they are very nice

[Abaddon127]

I agree that the musket and pistol need a new version without the bunderbuss muzzle. I hope that TLC helps us out.

[Captain Blackmoor]

Who knows what can happen in the future...

Perhaps BrickForge or BrickArms have their secret projects too...

But I really think there should exist LEGO muskets too instead of only blunderbusses.

[the enigma that is badger]

But I really think there should exist LEGO muskets too instead of only blunderbusses.

I certainly agree that minifig compatible muskets and flintlock pistols would be great to have on the market!

[Dr. Steve]

Of course, if you're willing to wait a little bit, BrickArms does have a new item in the pipeline I think you'll enjoy!

I was wondering about that "new Item" in the pipeline. Would it need a u clip to attach to the rifle or would that be a part of it?

Also do you have an idea of approx when we might see that new item?

THANKS

[the enigma that is badger]

I was wondering about that "new Item" in the pipeline. Would it need a u clip to attach to the rifle or would that be a part of it?

Also do you have an idea of approx when we might see that new item?

Take a look at the above pictures! It's the BrickArms Bayonet, which can be attached to any minifig-grippable surface via the BrickArms U-Clip! The base of the Bayonet can also fit into the standard LEGO port that fits anything minifig-grippable.

[alexandertam]

Take a look at the above pictures! It's the BrickArms Bayonet, which can be attached to any minifig-grippable surface via the BrickArms U-Clip! The base of the Bayonet can also fit into the standard LEGO port that fits anything minifig-grippable.

Will it be available soon?

[Sir Wellington]

Is the brickarms bayonett still for sale? Since I searched for it on the internet and I couldn't find it.

[Dr. Steve]

Is the brickarms bayonett still for sale? Since I searched for it on the internet and I couldn't find it.

I don't think it is for sale yet