TechnicBrickPower Posted March 27, 2020 Posted March 27, 2020 This Lego Technic MOC has over a billion to 1 gearing ratio. It is designed to resemble an architectural tower structure. I measured the input speed of over 3000 RPM using a digital tachometer and calculate the rate of rotation of the tower top to be about 222 days per rotation. This design has no purpose what so ever other than to look good and make a lot of noise. This idea was suggested and inspired by one of the eurobricks contributors. Quote
Aleh Posted March 27, 2020 Posted March 27, 2020 Wow! How much time required for the slowest axle to make 1 single spin? Quote
doug72 Posted March 27, 2020 Posted March 27, 2020 By the time the top output gear makes 1 turn, the input gear will be worn out ! Quote
JGW3000 Posted March 27, 2020 Posted March 27, 2020 (edited) Looks interesting, I like the color scheme. Watching that slowest gear is worse than watching paint dry, but I guess we all have lots of time these days! Edited March 27, 2020 by JGW3000 Quote
dr_spock Posted March 27, 2020 Posted March 27, 2020 Nice. How about a video live stream showing the final axle making a full rotation in the name of LEGO science? Also to verify your calculations of 222.5 days? Quote
TechnicBrickPower Posted March 29, 2020 Author Posted March 29, 2020 On 3/27/2020 at 11:23 PM, Aleh said: Wow! How much time required for the slowest axle to make 1 single spin? About 222 days. However the whole thing will probably be broken by then LOL. On 3/28/2020 at 5:26 AM, dr_spock said: Nice. How about a video live stream showing the final axle making a full rotation in the name of LEGO science? Also to verify your calculations of 222.5 days? Yes good idea - but you have to promise to watch all of it! Quote
Erik Leppen Posted March 29, 2020 Posted March 29, 2020 You should drive the thing the other way, turning the slow side, gearing up one billion times and see what happens when the fast side is doing 1 billion rpm. Quote
TechnicBrickPower Posted April 1, 2020 Author Posted April 1, 2020 On 3/30/2020 at 10:56 AM, Erik Leppen said: You should drive the thing the other way, turning the slow side, gearing up one billion times and see what happens when the fast side is doing 1 billion rpm. I'd like to see any machine do that let alone a Lego one! You'd be close to going faster than the speed of light which is about 3e8 m/s. So if for example the bottom axle had a 1 lego unit piece on it (8mm) then for every revolution the outside edge will travel at the distance 8mm x 2 x pi which is about 0.05 m. So you'd need to spin the top axle at only 6 revs/sec (360 RPM) to get 6 x 1,000,000,000 x 0.05 = 3e8 m/s == SPEED OF LIGHT! Let's start that project. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.