Thirdwigg Posted December 16, 2018 Posted December 16, 2018 (edited) OK, I'll play too. I am excited about any reason to build an aircraft, but these last couple of days have been rough. I have drafted four ideas (F-86, TA-183, Air Racer, and DH Mosquito), and I didn't like were any of them were going. Getting the nose right is so tricky. Or I am too picky. So, here is the fifth idea, and we will see what can happen with this. It's not very ambitious, but I'll be able to get it done in time. And it fits with what I like to do, mid sized, no PF, and packed full of features. Dual Rotors Front and Rear Collective control Retractable landing gear Opening side door Rear ramp Which It's not much to start, but I have drafted some of the mechanics off to the side. I'll update again tomorrow. I am stuck on colors right now. Yellow and red is overdone, and I do not want too much white, so I welcome votes. Top/Bottom Orange, DBG Lego City White, Blue, and Orange Orange and LBG vertical panels Orange and DBG vertical panels Red and White Edited January 20, 2019 by Thirdwigg Quote
1gor Posted December 16, 2018 Posted December 16, 2018 When I think in general about helicopters, first thing what I imagine is coast guard helicopter in white with some red or orange Quote
Thirdwigg Posted January 14, 2019 Author Posted January 14, 2019 So here is an update on my helicopter. The landing gear is working, and the collective is working as well. I confess, this contest has been a little hard for me due to a lack of inspiration. All of my ideas, including this one, are getting stuck very early in the design phase. I am not interested in continuing with what I have been developing. It's a shame, I love aircraft and contests, but this one is not working for me so far. I started another build this weekend of a WWII airplane that might work. Maybe this one will work a little better, but it won't be amazing. Quote
HorcikDesigns Posted January 14, 2019 Posted January 14, 2019 This colour scheme looks so good! I wish you loads of inspiration for next days, really looking forward to see this copter finished! Good luck! Quote
steph77 Posted January 14, 2019 Posted January 14, 2019 (edited) 1 hour ago, Thirdwigg said: I confess, this contest has been a little hard for me due to a lack of inspiration. All of my ideas, including this one, are getting stuck very early in the design phase. I am not interested in continuing with what I have been developing. It's a shame, I love aircraft and contests, but this one is not working for me so far. I started another build this weekend of a WWII airplane that might work. Maybe this one will work a little better, but it won't be amazing. I understand you so well, as my chinook give me the same feeling. The only thing i would correct in your last sentence is: Quote but it won't be amazing. by: it will be absolutely amasing Edited January 14, 2019 by steph77 Quote
Thirdwigg Posted January 14, 2019 Author Posted January 14, 2019 51 minutes ago, steph77 said: The only thing i would correct in your last sentence is: by: it will be absolutely amazing We will see. I took some influence from your Helicopter, and added a bunch of shooting parts to the airplane, so if nothing else, it will be, let's say...combative. I'll try to upload something soon. 2 hours ago, HorcikDesigns said: This colour scheme looks so good! I wish you loads of inspiration for next days, really looking forward to see this copter finished! Good luck! I'll give it one more build session and if nothing spikes I may set it aside for the time being. I do like how the rotors have turned out. Those blades work great at this scale, and the pitch change for the front and rear is great to watch. Quote
Thirdwigg Posted January 20, 2019 Author Posted January 20, 2019 As mentioned in the last post, this project has taken a little bit of a turn because I was not feeling motivated on the helicopter. The helicopter is still sitting off to the side, so I'll see if I come back to it. I like old warplanes, and I was tinkering around with some parts, and found some subbuilds I liked. I tied a couple of these subbuilds together with a Hawker Tempest in the back of my mind. This is what I got. I'll try to clean it up a little more soon since it's pretty rough right now. I'll repost the improvements as they happen. We'll see if this motivates a little more activity. Quote
1gor Posted January 20, 2019 Posted January 20, 2019 If I remember correctly, Tempest had characteristical chin for radiator to cool down H-24 engine (yes it has 24 cylinder engine).... Looks interesting project Quote
Thirdwigg Posted January 20, 2019 Author Posted January 20, 2019 Yep. It has 1/8th of the required cylinders. Quote
steph77 Posted January 21, 2019 Posted January 21, 2019 8 hours ago, Thirdwigg said: Yep. It has 1/8th of the required cylinders. Who cares? I find you capture proportion in a great way so far. From an aesthetic POV I would reduce the gap between front propeller and the engine cover by one stud. Good work! Quote
Thirdwigg Posted January 21, 2019 Author Posted January 21, 2019 5 hours ago, steph77 said: Who cares? I find you capture proportion in a great way so far. From an aesthetic POV I would reduce the gap between front propeller and the engine cover by one stud. Good work! Don’t worry, it’s on my list. I think the propeller diameter needs to increase a little too. We’ll see if we can get that to work as well. Quote
Thirdwigg Posted January 26, 2019 Author Posted January 26, 2019 Nothing too significant today. I spent some little chunks of time this last week on small parts: The wings have their general shape, the weapons are in, the flight controls work, and all the hard points are set. I'll clean it up a little more when I get a good block of time. I will order some parts soon to keep the colors a little more consistent (we'll lose the yellow). I still don't have a great solution for the landing gear. We'll see what I come up with... Quote
Rudivdk Posted January 26, 2019 Posted January 26, 2019 Looking very good! I'm happy this one gives you some inspiration, good to have you in competition as well. When it comes to raw firepower this plane is already unbeatable Quote
Thirdwigg Posted January 26, 2019 Author Posted January 26, 2019 1 hour ago, LEGO Train 12 Volts said: Very sleek! Perfect! 52 minutes ago, I_Igor said: Proportions look good to me Thanks. I'll try to keep the changes to a minimum. 32 minutes ago, Rudivdk said: Looking very good! I'm happy this one gives you some inspiration, good to have you in competition as well. When it comes to raw firepower this plane is already unbeatable I'm happy this one is working a little better for me too. I'm having some fun with this one, and I'm happy I'll be part of this contest. The firepower will be top notch, and I'll have to see if I can add a couple more arms to it. Quote
Thirdwigg Posted February 2, 2019 Author Posted February 2, 2019 OK, another update. I rebuild the frame to better accommodate the rear fuselage and the wings. Also, @I_Igor I have quadrupled the engine size. I now have half of the required 24 cylinders. So, maybe not a Napier Sable, but more like a Napier Pocketknife. It changes the look of the plane, so I'm not sure it will stay, but I had to try it. I'm not sold on the exhaust as well. It seems to mess up the side, and does not add much. I put the wrong axle in for the propellor, so again @steph77 the spinner to too long. I'll fix it. I need to do a little more shaping to the fuselage and the wings, and then some markings. The horizontal stabilizers will be white when parts arrive. I'll start working on other details soon. Getting closer to completion, which is good because time is running out. Quote
1gor Posted February 2, 2019 Posted February 2, 2019 Your pocketknife looks interesting. I see several interesting projects here and Kyle, yours is one of them Nice to see that your project is rolling Quote
Thirdwigg Posted February 18, 2019 Author Posted February 18, 2019 All done. Not my best work, but I'm happy it's finished. Quote
brickhappy Posted February 18, 2019 Posted February 18, 2019 (edited) I love WW2 aircraft! Very good shape, nice and compact. Bravo! I really like how it looks from the top. Edited February 18, 2019 by brickhappy Quote
HorcikDesigns Posted February 18, 2019 Posted February 18, 2019 Nice entry, I like the nose art you managed to add onto it. :D Quote
Thirdwigg Posted February 18, 2019 Author Posted February 18, 2019 @brickhappy @I_Igor Glad you like it. @HorcikDesigns yeah, the nose needed something, and I decided against the traditionally misogynistic options. Also, here is the video: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.