Idris Posted April 24, 2019 Posted April 24, 2019 19 hours ago, suffocation said: Yup, definitely missing a red 16T gear there on the left of the dark bluish gray changeover catch, as well as a tan half-bevel 12T gear in the red differential casing. Job done, 42070, perfectly working now thanks to you, dear suffocation, extremely appreciated! And many many thanks to all of you who gave their precious thoughts! All the best, Idris Quote
Idris Posted April 24, 2019 Posted April 24, 2019 2 hours ago, Alzema said: I had the same kind of problem with the Tracked Racer. It was a disfonctional receiver. I had to contact lego for a replacement. They sent me another for free. Hope this solves your problem. ;) Many thanks for your interest and thought. Mine was a “gear” problem and it is now solved. But again, many thanks for your contribution. Best Regards, Idris Quote
Yevhen Posted April 25, 2019 Posted April 25, 2019 Oh, my God! The model is so complex inside! I won't be surprised, if you have to rebuild it from the scratch! I remember it was difficult simply to disassemble it to sort parts! Quote
allanp Posted April 25, 2019 Posted April 25, 2019 16 hours ago, Alzema said: I had the same kind of problem with the Tracked Racer. It was a disfonctional receiver. I had to contact lego for a replacement. They sent me another for free. Hope this solves your problem. ;) I would think that having two vital gears missing completely is more likely to be the cause of the problem! Quote
Idris Posted April 25, 2019 Posted April 25, 2019 6 hours ago, allanp said: I would think that having two vital gears missing completely is more likely to be the cause of the problem! You are perfectly right, dear allanp and the problem is solved, 42070 works and moves perfectly. Many thanks, Idris 7 hours ago, Yevhen said: Oh, my God! The model is so complex inside! I won't be surprised, if you have to rebuild it from the scratch! I remember it was difficult simply to disassemble it to sort parts! Dear Yevhen, you are right, it IS complex but I simply missed to put two gears and managed to put them in place with the help of the tvizzers of one of my ex-gfs Now everything works fine, thank you for your concern and Best Regards, Idris Quote
leolego Posted May 5, 2019 Posted May 5, 2019 Don't know if i can ask my question here or i must open a new post (newby) my soon has problems with his truck. everything exept the crane is working. the crane is moving to right and left but isn't moving up or down. i don't get it. the gears seems to be alright and the red axel ? is put in correct.. has anybody an idea? or must he start over? Quote
Maaboo the Witch Posted May 5, 2019 Posted May 5, 2019 1 hour ago, leolego said: Don't know if i can ask my question here or i must open a new post (newby) my soon has problems with his truck. everything exept the crane is working. the crane is moving to right and left but isn't moving up or down. i don't get it. the gears seems to be alright and the red axel ? is put in correct.. has anybody an idea? or must he start over? I left the tan cone gear out of the actuator first time round. Luckily it was an easy fix. Check there. Quote
leolego Posted May 9, 2019 Posted May 9, 2019 On 5/5/2019 at 1:22 PM, Maaboo35 said: I left the tan cone gear out of the actuator first time round. Luckily it was an easy fix. Check there. thanks but that one is in. and with hand it is going up and down. i think he is going to do it over... Quote
allanp Posted May 9, 2019 Posted May 9, 2019 Hard to say. It's unlikely he would have to start over again. Is it possible for you to provide links to pictures so we can have a look? Quote
leolego Posted May 9, 2019 Posted May 9, 2019 4 minutes ago, allanp said: Hard to say. It's unlikely he would have to start over again. Is it possible for you to provide links to pictures so we can have a look? thanks i've found it. Axle Connector 2L was forgotten. really a bummer. really on a place must take it apart.. thanks Allenp and Maaboo35 Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 Hello So I'm building this for the first time so apologies for the dumb questions. I have built exactly as per book and spent an hour last night double checking etc. I have everything where it needs to be. Firstly, when I turn the front drive shaft, the rear wheels don't spin at all (orange arrow)..when I spin the shaft manually behind the red casing (blue arrow), the rear wheels and front wheels spin...in different directions! https://photos.google.com/photo/AF1QipOJe7DRkXXCoV_mfOH09BJLknLJAg4qIF67IJm- Pics for attention: https://photos.google.com/photo/AF1QipM6_v-Jzg9zVpiYrnhXoS1hOYH9qghcZJGx7PGF https://photos.google.com/photo/AF1QipNBd3IxZDbjC8bBhpdOHcge3a8jh6PCScmE7a78 https://photos.google.com/photo/AF1QipNGYj3C1kT_r6CtG6iAOcpIdNQiRZcwtxepyDtj Help! Stuck at step 175 now and don't want to move on until right Quote
1gor Posted July 24, 2019 Posted July 24, 2019 I can not see any images, but when you have wheels turning in opposite direction it is one differential that is placed in wrong direction ... Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 Links in the message should open from Google docs Quote
doug72 Posted July 24, 2019 Posted July 24, 2019 5 minutes ago, adbrown34 said: Links in the message should open from Google docs All I see is "requested URL not found on this server" Tried on Safari and Firefox - same result after entering google log in details. Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 Does this work: https://photos.app.goo.gl/3qNsfRFr6PnJfeY87 Quote
doug72 Posted July 24, 2019 Posted July 24, 2019 (edited) 7 hours ago, adbrown34 said: Does this work: https://photos.app.goo.gl/3qNsfRFr6PnJfeY87 Yes on Safari & Firefox & iPad. But none of the earlier posted links work, maybe his privacy settings blocking them. Edited July 24, 2019 by Doug72 Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 Cool. Any thoughts? I checked your model you set up. I think it's the same.. Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 https://photos.app.goo.gl/jEP8TJivUTxAdK6H7 Quote
1gor Posted July 24, 2019 Posted July 24, 2019 53 minutes ago, adbrown34 said: Cool. Any thoughts? I checked your model you set up. I think it's the same.. At the begining, differential orientation should be like this (I use image posted by @Seasider from his cool project for tc16) Quote
skppo Posted July 24, 2019 Posted July 24, 2019 (edited) 17 minutes ago, adbrown34 said: https://photos.app.goo.gl/jEP8TJivUTxAdK6H7 From what I see the model is behaving correctly. Rotate the center differential (red casing) directly and all axles should rotate the same way. Edited July 24, 2019 by skppo Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 If I spin the red dif a not the front wheels move. The rear does not 10 minutes ago, I_Igor said: At the begining, differential orientation should be like this (I use image posted by @Seasider from his cool project for tc16) This is how I have it set Quote
skppo Posted July 24, 2019 Posted July 24, 2019 Just now, adbrown34 said: If I spin the red dif a not the front wheels move. The rear does not Diffs send power to where there is the least resistance. The rear axles have more gears and more friction. => All power is sent to front axle. Put the wheels on it and roll it on the ground. If it is correctly assembled the center diff will then rotate and all wheels will roll smoothly. Quote
adbrown34 Posted July 24, 2019 Posted July 24, 2019 8 minutes ago, skppo said: From what I see the model is behaving correctly. Rotate the center differential (red casing) directly and all axles should rotate the same way. Added an up close video in the album Quote
skppo Posted July 24, 2019 Posted July 24, 2019 Just now, adbrown34 said: Added an up close video in the album It still looks like expected behaviour considering my previous message. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.