efferman Posted January 8, 2018 Author Posted January 8, 2018 On 1/8/2018 at 3:14 AM, Aventador2004 said: How long does it take before you mod a set @efferman? Expand mostly hours after finishing a set Quote
aminnich Posted January 9, 2018 Posted January 9, 2018 (edited) On 1/8/2018 at 7:22 AM, Aleh said: Hey guys! Does anybody thinking about 8x4 or even 10x4 MOD? I do. But only after buong the set. It will be not in the near future :( Expand How about something like this? Using the B-model cab instead of A-model. For those that do not know, this is a concrete pump truck. T Edited January 9, 2018 by aminnich Quote
Aleh Posted January 9, 2018 Posted January 9, 2018 On 1/9/2018 at 8:15 PM, aminnich said: How about something like this? Using the B-model cab instead of A-model. For those that do not know, this is a concrete pump truck. T Expand This is my project for this year on unimog wheels maybe on the MOD chassis from Lucio's crane truck/ Quote
1gor Posted January 9, 2018 Posted January 9, 2018 @aminnich for that you need 2 sets + 2 extra wheels - it has 22 wheels! Quote
brickless_kiwi Posted January 10, 2018 Posted January 10, 2018 On 1/9/2018 at 8:15 PM, aminnich said: How about something like this? Using the B-model cab instead of A-model. For those that do not know, this is a concrete pump truck. T Expand very possible if you stay in the Anthem scale, though Id go 8x4. Quote
aminnich Posted January 10, 2018 Posted January 10, 2018 I wasn't necessarily saying that I would build it, but that would be a cool MOC to be based from the Anthem Bmodel Quote
Aventador2004 Posted January 10, 2018 Posted January 10, 2018 On 1/9/2018 at 8:15 PM, aminnich said: How about something like this? Using the B-model cab instead of A-model. For those that do not know, this is a concrete pump truck. Not Expand Interesting idea, maybe you could try with 2 combined sets. Quote
aminnich Posted January 10, 2018 Posted January 10, 2018 Maybe I'll have to attempt something like that. I don't have the time to build... look, I haven't touched my TC13 build in a while Quote
evortigosa Posted January 11, 2018 Posted January 11, 2018 (edited) Hi there, as we know is so boring manually play linear actuators. Then I developed an automatized version with an M motor, an extension wire and a switch control. The motor is powered by the battery box from the RC truck and actuators are switched by a gearbox. LXF HERE Opinions and good ideas are welcome! Edited January 11, 2018 by evortigosa Quote
kbalage Posted January 11, 2018 Posted January 11, 2018 @evortigosa that's a neat solution, I see two issues - based on my experience the M motor might be too weak for this purpose (especially if you put anything in the container), and to operate the cranes smoothly you need to control both actuators the same time. Quote
evortigosa Posted January 11, 2018 Posted January 11, 2018 (edited) You have a point @kbalage I don't built it yet but from the lxf, there is space enough to change the M by an L motor. I believe there is no need to control both actuators at same time, but I am not sure. Thanks, by the way :) Edited January 11, 2018 by evortigosa Quote
kbalage Posted January 11, 2018 Posted January 11, 2018 @evortigosa I did not know it either until I tried it :) To stay as close as possible to the trailer with the payload it's better to control both actuators simultaneously. You can check it in my video. Quote
JonathanM Posted January 11, 2018 Posted January 11, 2018 I guess a double reversing gearbox would be best here so both LAs can be used at once in either direction. There seems like there should be enough space I think. Quote
efferman Posted January 13, 2018 Author Posted January 13, 2018 a short question to the Race version. With a stremline body or more naked? Quote
BrickbyBrickTechnic Posted January 13, 2018 Posted January 13, 2018 Very nice @efferman ! But I'm not sure I like those rear fenders. Could you use something other than those angles panels? They do not fuse well with the body. Quote
M_longer Posted February 1, 2018 Posted February 1, 2018 Flatbed trailer built from parts used in container trailer: Quote
Shiva Posted February 22, 2018 Posted February 22, 2018 efferman, thank you for your mod work on the trailer. Regarding the Race version? non streamlined version maybe? Quote
Brickgate Posted March 3, 2018 Posted March 3, 2018 On 1/1/2018 at 12:02 PM, efferman said: Some work with my mods Expand Hello Michael, First of all thanks for the great MOC. I would like to build this too. I also read the whole post at the Doctor Brick Forum, looking for the final lxf from the 42078 MOC as seen in this video.Somehow I'm not sure which is the final version.Would it be possible that you can post the final version lxf again?WideBody with RC on the truck + 20fuss version with RC on the trailer. thank you in advance Quote
efferman Posted March 4, 2018 Author Posted March 4, 2018 (edited) there are many several final files of different types. The Trucks in the Video are this one https://bricksafe.com/files/efferman/42078-mack-anthem/20 foot container mod.lxf for the 20 foot container version it tis this one, but a instruction is available too Edited March 4, 2018 by efferman Quote
Brickgate Posted March 4, 2018 Posted March 4, 2018 On 3/4/2018 at 7:24 AM, efferman said: there are many several final files of different types. The Trucks in the Video are this one https://bricksafe.com/files/efferman/42078-mack-anthem/42078 Mack Anthem wide body rc.lxf for the 20 foot container version it tis this one, but a instruction is available too Expand Thanks The 20 foot container Version is buggy on bricksafe. Please reload it on bricksafe. Quote
efferman Posted March 4, 2018 Author Posted March 4, 2018 A letter in the file title was the problem. it is fixed now Quote
Brickgate Posted March 4, 2018 Posted March 4, 2018 Do you probably have a additional part list for your moc? Quote
.thumb.jpg.2335d10c31c9ffa7029728589340e12f.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.