Epic Technic Posted January 15, 2017 Posted January 15, 2017 (edited) As many of you might have seen in Nicjasno's BMW e30 build episode 13, he's counting on volunteers to reverse engineer the chassis and build the body. So I decided to take up the challenge and reverse engineer the car. I first started with the rear suspension, since its simpler than the front one, and you may notice a bit of color vomit due to my lack of similar color pieces. I don't have the custom mini turntable hubs, so I just built place holders. After the rear suspension, I started on the front; first I tackled the hubs. Then, I moved onto the rest of the front suspension. Next up, the chassis, so stay tuned. Edited January 15, 2017 by Epic Technic Quote
offroadcreations Posted January 15, 2017 Posted January 15, 2017 Great job, you're off to a good start. Quote
Epic Technic Posted February 16, 2017 Author Posted February 16, 2017 Sorry for the long wait, but I've made good progress! The chassis is practically finished, I only have some parts at the back to finish. I've started on the roof, the bonnet and the front bumper section. I have also been playing around with some LPEs, I attempted to make a V6 but I couldn't make it run so I made a high revving single cylinder engine. Quote
zux Posted February 17, 2017 Posted February 17, 2017 Looking nice. 10 hours ago, Epic Technic said: I have also been playing around with some LPEs, I attempted to make a V6 but I couldn't make it run so I made a high revving single cylinder engine. BMW should have a inline 6-cylinder engine. Quote
AkiyamaWataru Posted February 17, 2017 Posted February 17, 2017 Inline 4 were used aswell in the e30 so atleast Inline 4 is a must Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.