Jump to content

Recommended Posts

Posted

Hi guys!

I’m not sure this is the right place to post but here it goes.

I’ve recently been offered the opportunity to buy either 42009 for 150€ or 8043 for 175€, both in their original polybags. I’ve missed these two sets because of my dark age. I’m not really into RC sets, 8043 would be my first one. But on the other hand it’s such a great and awesome set. But I also love cranes and 42009 is a must-have on my wishlist.

I should mention that I already have 8421, 8053, 8294 and 42053 in my collection.

Which set do you guys think I should get?

Thanks in advance and a great 2017 to everyone!

Posted

Go for 8043, without any doubt. That set is slowly becoming rare (and expensive). Plus, the number of functions (playability) are second to none (well, except 8455).

8043-1.png     8455-1.png

 

Posted (edited)

8043 has a lot more playability than 42009. For 42009, the A model you can only deploy outriggers, raise crane, then it's over. Only B model has some playability. While 8043 A model allows a lot more maneuver, and B model is essentially a RC tracked racer (42065) with a bucket. I have both of them so I think I can give some input here.

Edited by nguyengiangoc
Posted

While I appreciate the 42009, it doesn't even come close to the awesome-ness that is the 8043. The amount of ingenuity in that model is of another level. And as pointed out, great playability. Get it. 

Posted

Thanks everyone!

8043 it is then. I didn’t know that it was that good but now I can’t wait to assemble it and find out :sweet:

Posted

8043 for sure.  Be sure yours came with the newer Linear Actuators.  I recall there was some problems with them in the early 8043 set production run.

 

 

Posted

I got your interest in 42009. Its more interesting and challenging build for the deep Technic fan. But if I were you and having all the sets you mentioned I'd check Rebrickable.com for the parts I miss from 42009 if I buy 8043 and get them along with the instructions and stickers from Bricklink. I did that myself ( collect missing parts of 42009 from BL) and now almost done. One tough part to get is 5x16L axle. For that I bought 3x32L axles and will cut them in half.

Posted
On 05/01/2017 at 4:49 PM, dr_spock said:

8043 for sure.  Be sure yours came with the newer Linear Actuators.  I recall there was some problems with them in the early 8043 set production run.

Thanks for the heads up! I didn't know that

On 05/01/2017 at 10:53 PM, Samer said:

I got your interest in 42009. Its more interesting and challenging build for the deep Technic fan. But if I were you and having all the sets you mentioned I'd check Rebrickable.com for the parts I miss from 42009 if I buy 8043 and get them along with the instructions and stickers from Bricklink. I did that myself ( collect missing parts of 42009 from BL) and now almost done. One tough part to get is 5x16L axle. For that I bought 3x32L axles and will cut them in half.

That's a very good plan, thanks :classic:

Posted (edited)
10 hours ago, jotta93 said:

Thanks for the heads up! I didn't know that

That's a very good plan, thanks :classic:

Or...you could buy the White 16L axles, they are alot more common and cheaper.

http://www.bricklink.com/catalogItemIn.asp?P=50451&colorID=1&in=A

 

http://www.ebay.ie/itm/Lego-Technic-4-weisse-Kreuzstangen-16lang-50451-/222355800457?hash=item33c5704189:g:OEkAAOSwmLlX546m

 

Edited by Richard Dower
Posted
3 hours ago, Richard Dower said:

Or...you could buy the White 16L axles, they are alot more common and cheaper.

I was actually referring to buying the missing parts :classic:

Posted
On 1/5/2017 at 4:53 PM, Samer said:

I got your interest in 42009. Its more interesting and challenging build for the deep Technic fan. But if I were you and having all the sets you mentioned I'd check Rebrickable.com for the parts I miss from 42009 if I buy 8043 and get them along with the instructions and stickers from Bricklink. I did that myself ( collect missing parts of 42009 from BL) and now almost done. One tough part to get is 5x16L axle. For that I bought 3x32L axles and will cut them in half.

Neither the 8043 nor the 42009 uses the 16L axles ... I'm confused  :(

  • 4 weeks later...
Posted

Sadly guys, it turns out both sets were fake. They were both fake Lepin sets imported from China, that's why the advert only showed the polybags with pieces inside. Luckily I asked for pictures and was able to compare them to online reviews of both the original and fake sets. So I didn't spend any money, only a few hours of my time.

But thanks for all the help anyway! :classic:

Posted

Sorry about your luck. I got a 8043 off ebay that was 'missing pieces' for $250 USD, was only missing 10 common pieces that are still in production. Keep looking, the 8043 is a great build and play set!  :classic: 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...