Jump to content

Recommended Posts

Posted (edited)

Hello folks,

I have created this topic so I can present my system models to the world. I spend most of my time building technic, but sometimes I need to make smaller things.

To kick everything off, I will begin by presenting my F1 car. It is based off McLaren's 2003 car.

F1 Car (8)F1 Car (6)F1 Car (5)F1 Car (4)F1 Car (3)F1 Car (7)

I will be more than glad to answer any queries, comments, questions or concerns, as long as they are voiced by quoting me or tagging me.

I hope you enjoy, and until next time, have a nice day.

Cheers,

Let's Build.

Edited by letsbuild
Typo
Posted (edited)

Hey folks!

I'm back again, this time with a whole house! Yes, that's right, a house. My biggest system lego build to date, it weighs just over five pounds. It is collapsible for easy transport, comig apart into four easy-to-carry sections: the front of the lower floor, the rear of the lower floor, the top floor, and the roof. If anyone has any better ideas for my roof, I'm open to ideas. Without further ado, please welcome, MY HOUSE! (please note, this isn't my real life house. You will not be able to find a house that is like this in the real world. Do not waste time trying to find this house. Thank you, have a nice day.)

High three-quarter left viewHigh three-quarter right viewBottom floorBottom floor planMore garage...Top messy floorSuch. A. Mess.All sections

You can find more pictures at my flickr.

Cheers,

Let's Build!

Edited by letsbuild
Posted

:thumbup:

A huge garage and a bed to sleep. What else do you need?! :wink:

Can you please post some pics from the Audi?

Thank you

Posted
On 2016-11-21 at 5:22 PM, Lox Lego said:

Cool! I'd like to take the Audi in the garage for a spin  :wink:

Yeah, I wish I could too! Actually, it's an audi/mclaren/corvette/ferrari! I'll explain more when I post it.

On 2016-11-22 at 2:21 AM, Kmuffin said:

Your garage is bigger than the the rest of it :laugh: . It's your house so it means you have Audi and a f1 car in ur garage :pir-oh:.

Yeah, I had started by laying out the 8x16 tiles for the garage, then just got carried away, forgetting to check the proportions. The house is actually of odd-numbered dimensions, leading to some pretty annoying circumstances, such as the gutter not quite working properly.

On 2016-11-22 at 4:32 AM, Zork said:

:thumbup:

A huge garage and a bed to sleep. What else do you need?! :wink:

Can you please post some pics from the Audi?

Thank you

That's the way to think! Sure, I'll post some pictures of the audi when I get some black paper for the background.

 

Cheers!

Let's Build!

Posted

Nice f1 car - good choice not trying to jam a minifig torso into this thing! Only using the head keeps it low as it needs be! Good job!
Great house aswell - or should i say "living garage"? ;-)

Posted
On 2016-11-23 at 6:41 PM, Ron Dayes said:

Nice f1 car - good choice not trying to jam a minifig torso into this thing! Only using the head keeps it low as it needs be! Good job!
Great house aswell - or should i say "living garage"? ;-)

Yeah, wouldn't you know a thing or two about fitting minifigs into small spaces.:wink: Thank you for your compliments.

 

Cheers,

Let's Build!

P.S., pictures of the Audi will happen by next sunday, so hold yer horses!

Posted
1 hour ago, letsbuild said:

Yeah, wouldn't you know a thing or two about fitting minifigs into small spaces.:wink: Thank you for your compliments.

 

Cheers,

Let's Build!

P.S., pictures of the Audi will happen by next sunday, so hold yer horses!

perhaps i might know a bit :wink: I ll stay tuned for that audi!

Cheers and have fun building!

Posted (edited)

Alright!

The long-awaited "Audi" is here! (The reason I call it an Audi/Ferrari/Mclaren/Corvette because it has the features of all those makes, plus the logos of some.) Features a fake engine, openable cockpit and engine cover, and as a bonus, IT CAN ROLL! Wow! Huge acheivement there! Anyways, pictures!

Audi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/Corvette

There you have it! Enjoy, and I will be glad supply any more information you would like!

 

Cheers,

Let's Build!

Edited by letsbuild
Posted
On 3 December, 2016 at 6:21 AM, letsbuild said:

Alright!

The long-awaited "Audi" is here! (The reason I call it an Audi/Ferrari/Mclaren/Corvette because it has the features of all those makes, plus the logos of some.) Features a fake engine, openable cockpit and engine cover, and as a bonus, IT CAN ROLL! Wow! Huge acheivement there! Anyways, pictures!

Audi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/CorvetteAudi/Ferrari/Mclaren/Corvette

There you have it! Enjoy, and I will be glad supply any more information you would like!

 

Cheers,

Let's Build!

It's a ferrari :laugh:

Posted
On 3 December, 2016 at 6:21 AM, letsbuild said:

Alright!

The reason I call it an Audi/Ferrari/Mclaren/Corvette because it has the features of all those makes, plus the logos of some.

EVI7rJ.gif

  • 2 weeks later...
Posted
On 2016-12-09 at 1:10 PM, ER0L said:

It definitely is a McLaren. How do I know? Because:

:wink:

Yeah, sorry. I originally built your model, then modified it with a few of my own constructions. Would you like me to edit the post to include where my idea came from?

Posted
3 hours ago, Demetreous said:

I love these. And is that a bathroom I spot in the house?

-Deme

Thank you!

Sure is a bathroom, just not a very well-designed one.

  • 1 month later...
Posted (edited)

New year, new model, A porsche-inspired one this time, built for LUGNuts' build challenge number 111: Supercars Vs Muscle cars.

I really like how the rear end turned out, not so much the front end though. I am open to suggestions for improvements.

Porsche-type 6-wide MOCPorsche-type 6-wide MOCPorsche-type 6-wide MOCPorsche-type 6-wide MOC

The engine can be removed and replaced by a different one.

I might make instructions if there is enough interest.

 

Cheers,

Let's Build!

Edited by letsbuild
typos
  • 2 weeks later...
Posted

I'm back! This time, I'm presenting a display stand!

Tilted Stand (5)

For those interested in building their own, there are more pictures on my Flickr Photostream, to which you can find a link in my signature.

It is designed for 6-7 wide cars, whose grip should be enough to stay on without slipping. My Porsche works fine, as you can see here:

Car On Display

Have a nice day!

Let's Build.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...